From: Ridong Chen <ridong.chen@linux.dev>
To: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>,
Roman Gushchin <roman.gushchin@linux.dev>,
Shakeel Butt <shakeel.butt@linux.dev>,
Andrew Morton <akpm@linux-foundation.org>,
Muchun Song <muchun.song@linux.dev>,
Kairui Song <kasong@tencent.com>, Qi Zheng <qi.zheng@linux.dev>,
Barry Song <baohua@kernel.org>,
Axel Rasmussen <axelrasmussen@google.com>,
Yuanchu Xie <yuanchu@google.com>, Wei Xu <weixugc@google.com>,
David Hildenbrand <david@kernel.org>,
Lorenzo Stoakes <ljs@kernel.org>,
Chris Down <chris@chrisdown.name>, Tejun Heo <tj@kernel.org>,
Yu Zhao <yuzhao@google.com>,
"open list:CONTROL GROUP - MEMORY RESOURCE CONTROLLER (MEMCG)"
<cgroups@vger.kernel.org>,
"open list:CONTROL GROUP - MEMORY RESOURCE CONTROLLER (MEMCG)"
<linux-mm@kvack.org>,
linux-kernel@vger.kernel.org, Ridong Chen <chenridong@xiaomi.com>,
stable@vger.kernel.org
Subject: Re: [PATCH v3 1/2] mm/page_counter: avoid integer overflow in effective_protection()
Date: Fri, 4 Sep 2026 11:34:11 +0800 [thread overview]
Message-ID: <ce8d1bec-d281-459f-920c-7ce5bb17e417@linux.dev> (raw)
In-Reply-To: <20260903140003.GR3004@cmpxchg.org>
On 9/3/2026 10:00 PM, Johannes Weiner wrote:
> On Thu, Sep 03, 2026 at 11:19:51AM +0800, Ridong Chen wrote:
>> From: Ridong Chen <chenridong@xiaomi.com>
>>
>> effective_protection() scales a parent's protection by a ratio of page
>> counts, e.g. for recursive protection:
>>
>> (parent_effective - siblings_protected) * (usage - protected)
>> / (parent_usage - siblings_protected)
>>
>> The multiply is done at unsigned long width before dividing. On systems
>> with >= 16TB RAM the product can exceed 2^64 and wrap, giving a bogus
>> protection value and silently breaking memory.min/low enforcement.
>>
>> Use mul_u64_u64_div_u64() to multiply in a 128-bit intermediate. Because
>> usage and parent_usage are not read atomically (a child is charged
>> before its parent), usage - protected can briefly exceed the divisor,
>> making the quotient overflow 64 bits and trap (#DE on x86). Cap it so
>> the ratio stays <= 1.
>>
>> Reported by the sashiko review tool [1].
>>
>> [1] https://sashiko.dev/#/patchset/20260826133054.88529-1-ridong.chen@linux.dev?part=1
>>
>> Fixes: bc50bcc6e00b ("mm: memcontrol: clean up and document effective low/min calculations")
>> Fixes: 8a931f801340 ("mm: memcontrol: recursive memory.low protection")
>> Cc: stable@vger.kernel.org
>> Assisted-by: Claude:claude-opus-4-8
>> Reviewed-by: Barry Song <baohua@kernel.org>
>> Signed-off-by: Ridong Chen <chenridong@xiaomi.com>
>> ---
>> mm/page_counter.c | 19 +++++++++++++------
>> 1 file changed, 13 insertions(+), 6 deletions(-)
>>
>> diff --git a/mm/page_counter.c b/mm/page_counter.c
>> index 661e0f2a5127..e8bd512069c5 100644
>> --- a/mm/page_counter.c
>> +++ b/mm/page_counter.c
>> @@ -8,6 +8,7 @@
>> #include <linux/page_counter.h>
>> #include <linux/atomic.h>
>> #include <linux/kernel.h>
>> +#include <linux/math64.h>
>> #include <linux/string.h>
>> #include <linux/sched.h>
>> #include <linux/bug.h>
>> @@ -356,7 +357,8 @@ static unsigned long effective_protection(unsigned long usage,
>> * otherwise get a smaller chunk than what they claimed.
>> */
>> if (siblings_protected > parent_effective)
>> - return protected * parent_effective / siblings_protected;
>> + return mul_u64_u64_div_u64(protected, parent_effective,
>> + siblings_protected);
>>
>> /*
>> * Ok, utilized protection of all children is within what the
>> @@ -397,13 +399,18 @@ static unsigned long effective_protection(unsigned long usage,
>> if (parent_effective > siblings_protected &&
>> parent_usage > siblings_protected &&
>> usage > protected) {
>> - unsigned long unclaimed;
>> + unsigned long unclaimed = parent_effective - siblings_protected;
>> + unsigned long unprotected = usage - protected;
>> + unsigned long parent_unprotected = parent_usage - siblings_protected;
>>
>> - unclaimed = parent_effective - siblings_protected;
>> - unclaimed *= usage - protected;
>> - unclaimed /= parent_usage - siblings_protected;
>> + /*
>> + * The usages aren't read atomically, so a child can transiently
>> + * appear to use more than its parent, making the ratio exceed 1
>> + * and the quotient overflow 64 bits (#DE on x86). Cap it.
>> + */
>> + unprotected = min(unprotected, parent_unprotected);
>
> Looks correct to me. But a few nits on readability, since this code
> already is quite painfully complicated.
>
> Please don't do math in the declaration block.
>
> `unclaimed` made a bit more sense when it held *this group's* final
> share of the unclaimed protection. As an intermediate, it's *the
> parent's* unclaimed protection.
>
> Put together, it should look something like this:
>
> unsigned long parent_unclaimed, parent_unprotected, unprotected;
>
> parent_unclaimed = parent_effective - siblings_protected;
> parent_unprotected = parent_usage - siblings_protected;
> unprotected = usage - protected;
>
> /* overflow comment */
> unprotected = min(usage - protected, parent_unprotected);
> ep += mul_u64_u64_div_u64(parent_unclaimed, unprotected, parent_unprotected);
>
> With that,
>
> Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Thank you for your suggestion. Will update.
--
Best regards
Ridong
next prev parent reply other threads:[~2026-09-04 3:34 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-03 3:19 [PATCH v3 0/2] mm/mglru: fix ineffective memory protection for non-kswapd reclaim Ridong Chen
2026-09-03 3:19 ` [PATCH v3 1/2] mm/page_counter: avoid integer overflow in effective_protection() Ridong Chen
2026-09-03 14:00 ` Johannes Weiner
2026-09-04 3:34 ` Ridong Chen [this message]
2026-09-04 8:37 ` David Laight
2026-09-03 3:19 ` [PATCH v3 2/2] mm/mglru: fix ineffective memory protection for non-kswapd reclaim Ridong Chen
2026-09-03 6:30 ` Barry Song
2026-09-03 11:48 ` Ridong Chen
2026-09-03 14:09 ` Johannes Weiner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ce8d1bec-d281-459f-920c-7ce5bb17e417@linux.dev \
--to=ridong.chen@linux.dev \
--cc=akpm@linux-foundation.org \
--cc=axelrasmussen@google.com \
--cc=baohua@kernel.org \
--cc=cgroups@vger.kernel.org \
--cc=chenridong@xiaomi.com \
--cc=chris@chrisdown.name \
--cc=david@kernel.org \
--cc=hannes@cmpxchg.org \
--cc=kasong@tencent.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=ljs@kernel.org \
--cc=mhocko@kernel.org \
--cc=muchun.song@linux.dev \
--cc=qi.zheng@linux.dev \
--cc=roman.gushchin@linux.dev \
--cc=shakeel.butt@linux.dev \
--cc=stable@vger.kernel.org \
--cc=tj@kernel.org \
--cc=weixugc@google.com \
--cc=yuanchu@google.com \
--cc=yuzhao@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox