From: Baolin Wang <baolin.wang@linux.alibaba.com>
To: akpm@linux-foundation.org, hughd@google.com
Cc: willy@infradead.org, david@redhat.com, ioworker0@gmail.com,
wangkefeng.wang@huawei.com, ying.huang@intel.com,
21cnbao@gmail.com, ryan.roberts@arm.com, shy828301@gmail.com,
ziy@nvidia.com, baolin.wang@linux.alibaba.com,
linux-mm@kvack.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 0/7] add mTHP support for anonymous shmem
Date: Mon, 13 May 2024 13:08:10 +0800 [thread overview]
Message-ID: <cover.1715571279.git.baolin.wang@linux.alibaba.com> (raw)
Anonymous pages have already been supported for multi-size (mTHP) allocation
through commit 19eaf44954df, that can allow THP to be configured through the
sysfs interface located at '/sys/kernel/mm/transparent_hugepage/hugepage-XXkb/enabled'.
However, the anonymous shmem will ignore the anonymous mTHP rule configured
through the sysfs interface, and can only use the PMD-mapped THP, that is not
reasonable. Many implement anonymous page sharing through mmap(MAP_SHARED |
MAP_ANONYMOUS), especially in database usage scenarios, therefore, users expect
to apply an unified mTHP strategy for anonymous pages, also including the
anonymous shared pages, in order to enjoy the benefits of mTHP. For example,
lower latency than PMD-mapped THP, smaller memory bloat than PMD-mapped THP,
contiguous PTEs on ARM architecture to reduce TLB miss etc.
The primary strategy is similar to supporting anonymous mTHP. Introduce
a new interface '/mm/transparent_hugepage/hugepage-XXkb/shmem_enabled',
which can have all the same values as the top-level
'/sys/kernel/mm/transparent_hugepage/shmem_enabled', with adding a new
additional "inherit" option. By default all sizes will be set to "never"
except PMD size, which is set to "inherit". This ensures backward compatibility
with the anonymous shmem enabled of the top level, meanwhile also allows
independent control of anonymous shmem enabled for each mTHP.
Use the page fault latency tool to measure the performance of 1G anonymous shmem
with 32 threads on my machine environment with: ARM64 Architecture, 32 cores,
125G memory:
base: mm-unstable
user-time sys_time faults_per_sec_per_cpu faults_per_sec
0.04s 3.10s 83516.416 2669684.890
mm-unstable + patchset, anon shmem mTHP disabled
user-time sys_time faults_per_sec_per_cpu faults_per_sec
0.02s 3.14s 82936.359 2630746.027
mm-unstable + patchset, anon shmem 64K mTHP enabled
user-time sys_time faults_per_sec_per_cpu faults_per_sec
0.08s 0.31s 678630.231 17082522.495
From the data above, it is observed that the patchset has a minimal impact when
mTHP is not enabled (some fluctuations observed during testing). When enabling 64K
mTHP, there is a significant improvement of the page fault latency.
TODO:
- Support mTHP for tmpfs (?).
- Do not split the large folio when share memory swap out.
- Can swap in a large folio for share memory.
Changes from v1:
- Drop the patch that re-arranges the position of highest_order() and
next_order(), per Ryan.
- Modify the finish_fault() to fix VA alignment issue, per Ryan and
David.
- Fix some building issues, reported by Lance and kernel test robot.
- Update some commit message.
Changes from RFC:
- Rebase the patch set against the new mm-unstable branch, per Lance.
- Add a new patch to export highest_order() and next_order().
- Add a new patch to align mTHP size in shmem_get_unmapped_area().
- Handle the uffd case and the VMA limits case when building mapping for
large folio in the finish_fault() function, per Ryan.
- Remove unnecessary 'order' variable in patch 3, per Kefeng.
- Keep the anon shmem counters' name consistency.
- Modify the strategy to support mTHP for anonymous shmem, discussed with
Ryan and David.
- Add reviewed tag from Barry.
- Update the commit message.
Baolin Wang (7):
mm: memory: extend finish_fault() to support large folio
mm: shmem: add an 'order' parameter for shmem_alloc_hugefolio()
mm: shmem: add THP validation for PMD-mapped THP related statistics
mm: shmem: add multi-size THP sysfs interface for anonymous shmem
mm: shmem: add mTHP support for anonymous shmem
mm: shmem: add mTHP size alignment in shmem_get_unmapped_area
mm: shmem: add mTHP counters for anonymous shmem
Documentation/admin-guide/mm/transhuge.rst | 29 ++
include/linux/huge_mm.h | 23 ++
mm/huge_memory.c | 17 +-
mm/memory.c | 58 +++-
mm/shmem.c | 338 ++++++++++++++++++---
5 files changed, 403 insertions(+), 62 deletions(-)
--
2.39.3
next reply other threads:[~2024-05-13 5:08 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-13 5:08 Baolin Wang [this message]
2024-05-13 5:08 ` [PATCH v2 1/7] mm: memory: extend finish_fault() to support large folio Baolin Wang
2024-05-13 5:08 ` [PATCH v2 2/7] mm: shmem: add an 'order' parameter for shmem_alloc_hugefolio() Baolin Wang
2024-05-13 5:08 ` [PATCH v2 3/7] mm: shmem: add THP validation for PMD-mapped THP related statistics Baolin Wang
2024-05-13 5:08 ` [PATCH v2 4/7] mm: shmem: add multi-size THP sysfs interface for anonymous shmem Baolin Wang
2024-05-13 5:08 ` [PATCH v2 5/7] mm: shmem: add mTHP support " Baolin Wang
2024-05-14 13:36 ` Lance Yang
2024-05-15 3:09 ` Baolin Wang
2024-05-13 5:08 ` [PATCH v2 6/7] mm: shmem: add mTHP size alignment in shmem_get_unmapped_area Baolin Wang
2024-05-13 5:08 ` [PATCH v2 7/7] mm: shmem: add mTHP counters for anonymous shmem Baolin Wang
2024-05-14 14:49 ` Lance Yang
2024-05-15 3:14 ` Baolin Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1715571279.git.baolin.wang@linux.alibaba.com \
--to=baolin.wang@linux.alibaba.com \
--cc=21cnbao@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=david@redhat.com \
--cc=hughd@google.com \
--cc=ioworker0@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=ryan.roberts@arm.com \
--cc=shy828301@gmail.com \
--cc=wangkefeng.wang@huawei.com \
--cc=willy@infradead.org \
--cc=ying.huang@intel.com \
--cc=ziy@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).