From: Andy Lutomirski <luto@kernel.org>
To: x86@kernel.org
Cc: linux-kernel@vger.kernel.org, Borislav Petkov <bp@alien8.de>,
Linus Torvalds <torvalds@linux-foundation.org>,
Andrew Morton <akpm@linux-foundation.org>,
Mel Gorman <mgorman@suse.de>,
"linux-mm@kvack.org" <linux-mm@kvack.org>,
Nadav Amit <nadav.amit@gmail.com>, Rik van Riel <riel@redhat.com>,
Dave Hansen <dave.hansen@intel.com>,
Arjan van de Ven <arjan@linux.intel.com>,
Peter Zijlstra <peterz@infradead.org>,
Andy Lutomirski <luto@kernel.org>
Subject: [PATCH v3 04/11] x86/mm: Give each mm TLB flush generation a unique ID
Date: Tue, 20 Jun 2017 22:22:10 -0700 [thread overview]
Message-ID: <e2903f555bd23f8cf62f34b91895c42f7d4e40e3.1498022414.git.luto@kernel.org> (raw)
In-Reply-To: <cover.1498022414.git.luto@kernel.org>
In-Reply-To: <cover.1498022414.git.luto@kernel.org>
This adds two new variables to mmu_context_t: ctx_id and tlb_gen.
ctx_id uniquely identifies the mm_struct and will never be reused.
For a given mm_struct (and hence ctx_id), tlb_gen is a monotonic
count of the number of times that a TLB flush has been requested.
The pair (ctx_id, tlb_gen) can be used as an identifier for TLB
flush actions and will be used in subsequent patches to reliably
determine whether all needed TLB flushes have occurred on a given
CPU.
This patch is split out for ease of review. By itself, it has no
real effect other than creating and updating the new variables.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
---
arch/x86/include/asm/mmu.h | 25 +++++++++++++++++++++++--
arch/x86/include/asm/mmu_context.h | 5 +++++
arch/x86/include/asm/tlbflush.h | 18 ++++++++++++++++++
arch/x86/mm/tlb.c | 6 ++++--
4 files changed, 50 insertions(+), 4 deletions(-)
diff --git a/arch/x86/include/asm/mmu.h b/arch/x86/include/asm/mmu.h
index 79b647a7ebd0..bb8c597c2248 100644
--- a/arch/x86/include/asm/mmu.h
+++ b/arch/x86/include/asm/mmu.h
@@ -3,12 +3,28 @@
#include <linux/spinlock.h>
#include <linux/mutex.h>
+#include <linux/atomic.h>
/*
- * The x86 doesn't have a mmu context, but
- * we put the segment information here.
+ * x86 has arch-specific MMU state beyond what lives in mm_struct.
*/
typedef struct {
+ /*
+ * ctx_id uniquely identifies this mm_struct. A ctx_id will never
+ * be reused, and zero is not a valid ctx_id.
+ */
+ u64 ctx_id;
+
+ /*
+ * Any code that needs to do any sort of TLB flushing for this
+ * mm will first make its changes to the page tables, then
+ * increment tlb_gen, then flush. This lets the low-level
+ * flushing code keep track of what needs flushing.
+ *
+ * This is not used on Xen PV.
+ */
+ atomic64_t tlb_gen;
+
#ifdef CONFIG_MODIFY_LDT_SYSCALL
struct ldt_struct *ldt;
#endif
@@ -37,6 +53,11 @@ typedef struct {
#endif
} mm_context_t;
+#define INIT_MM_CONTEXT(mm) \
+ .context = { \
+ .ctx_id = 1, \
+ }
+
void leave_mm(int cpu);
#endif /* _ASM_X86_MMU_H */
diff --git a/arch/x86/include/asm/mmu_context.h b/arch/x86/include/asm/mmu_context.h
index ecfcb6643c9b..e5295d485899 100644
--- a/arch/x86/include/asm/mmu_context.h
+++ b/arch/x86/include/asm/mmu_context.h
@@ -129,9 +129,14 @@ static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
this_cpu_write(cpu_tlbstate.state, TLBSTATE_LAZY);
}
+extern atomic64_t last_mm_ctx_id;
+
static inline int init_new_context(struct task_struct *tsk,
struct mm_struct *mm)
{
+ mm->context.ctx_id = atomic64_inc_return(&last_mm_ctx_id);
+ atomic64_set(&mm->context.tlb_gen, 0);
+
#ifdef CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS
if (cpu_feature_enabled(X86_FEATURE_OSPKE)) {
/* pkey 0 is the default and always allocated */
diff --git a/arch/x86/include/asm/tlbflush.h b/arch/x86/include/asm/tlbflush.h
index 50ea3482e1d1..1eb946c0507e 100644
--- a/arch/x86/include/asm/tlbflush.h
+++ b/arch/x86/include/asm/tlbflush.h
@@ -57,6 +57,23 @@ static inline void invpcid_flush_all_nonglobals(void)
__invpcid(0, 0, INVPCID_TYPE_ALL_NON_GLOBAL);
}
+static inline u64 bump_mm_tlb_gen(struct mm_struct *mm)
+{
+ u64 new_tlb_gen;
+
+ /*
+ * Bump the generation count. This also serves as a full barrier
+ * that synchronizes with switch_mm: callers are required to order
+ * their read of mm_cpumask after their writes to the paging
+ * structures.
+ */
+ smp_mb__before_atomic();
+ new_tlb_gen = atomic64_inc_return(&mm->context.tlb_gen);
+ smp_mb__after_atomic();
+
+ return new_tlb_gen;
+}
+
#ifdef CONFIG_PARAVIRT
#include <asm/paravirt.h>
#else
@@ -262,6 +279,7 @@ void native_flush_tlb_others(const struct cpumask *cpumask,
static inline void arch_tlbbatch_add_mm(struct arch_tlbflush_unmap_batch *batch,
struct mm_struct *mm)
{
+ bump_mm_tlb_gen(mm);
cpumask_or(&batch->cpumask, &batch->cpumask, mm_cpumask(mm));
}
diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c
index fd593833a854..6d9d37323a43 100644
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -28,6 +28,8 @@
* Implement flush IPI by CALL_FUNCTION_VECTOR, Alex Shi
*/
+atomic64_t last_mm_ctx_id = ATOMIC64_INIT(1);
+
void leave_mm(int cpu)
{
struct mm_struct *loaded_mm = this_cpu_read(cpu_tlbstate.loaded_mm);
@@ -286,8 +288,8 @@ void flush_tlb_mm_range(struct mm_struct *mm, unsigned long start,
cpu = get_cpu();
- /* Synchronize with switch_mm. */
- smp_mb();
+ /* This is also a barrier that synchronizes with switch_mm(). */
+ bump_mm_tlb_gen(mm);
/* Should we flush just the requested range? */
if ((end != TLB_FLUSH_ALL) &&
--
2.9.4
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2017-06-21 5:22 UTC|newest]
Thread overview: 76+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-21 5:22 [PATCH v3 00/11] PCID and improved laziness Andy Lutomirski
2017-06-21 5:22 ` [PATCH v3 01/11] x86/mm: Don't reenter flush_tlb_func_common() Andy Lutomirski
2017-06-21 8:01 ` Thomas Gleixner
2017-06-21 8:49 ` Borislav Petkov
2017-06-21 15:15 ` Andy Lutomirski
2017-06-21 23:26 ` Nadav Amit
2017-06-22 2:27 ` Andy Lutomirski
2017-06-22 7:32 ` Ingo Molnar
2017-06-21 5:22 ` [PATCH v3 02/11] x86/ldt: Simplify LDT switching logic Andy Lutomirski
2017-06-21 8:03 ` Thomas Gleixner
2017-06-21 9:40 ` Borislav Petkov
2017-06-21 5:22 ` [PATCH v3 03/11] x86/mm: Remove reset_lazy_tlbstate() Andy Lutomirski
2017-06-21 8:03 ` Thomas Gleixner
2017-06-21 9:50 ` Borislav Petkov
2017-06-21 5:22 ` Andy Lutomirski [this message]
2017-06-21 8:05 ` [PATCH v3 04/11] x86/mm: Give each mm TLB flush generation a unique ID Thomas Gleixner
2017-06-21 10:33 ` Borislav Petkov
2017-06-21 15:23 ` Andy Lutomirski
2017-06-21 17:06 ` Borislav Petkov
2017-06-21 17:43 ` Borislav Petkov
2017-06-22 2:34 ` Andy Lutomirski
2017-06-21 5:22 ` [PATCH v3 05/11] x86/mm: Track the TLB's tlb_gen and update the flushing algorithm Andy Lutomirski
2017-06-21 8:32 ` Thomas Gleixner
2017-06-21 15:11 ` Andy Lutomirski
2017-06-21 18:44 ` Borislav Petkov
2017-06-22 2:46 ` Andy Lutomirski
2017-06-22 7:24 ` Borislav Petkov
2017-06-22 14:48 ` Andy Lutomirski
2017-06-22 14:59 ` Borislav Petkov
2017-06-22 15:55 ` Andy Lutomirski
2017-06-22 17:22 ` Borislav Petkov
2017-06-22 18:08 ` Andy Lutomirski
2017-06-23 8:42 ` Borislav Petkov
2017-06-23 15:46 ` Andy Lutomirski
2017-06-21 5:22 ` [PATCH v3 06/11] x86/mm: Rework lazy TLB mode and TLB freshness tracking Andy Lutomirski
2017-06-21 9:01 ` Thomas Gleixner
2017-06-21 16:04 ` Andy Lutomirski
2017-06-21 17:29 ` Borislav Petkov
2017-06-22 14:50 ` Borislav Petkov
2017-06-22 17:47 ` Andy Lutomirski
2017-06-22 19:05 ` Borislav Petkov
2017-07-27 19:53 ` Andrew Banman
2017-07-28 2:05 ` Andy Lutomirski
2017-06-23 13:34 ` Boris Ostrovsky
2017-06-23 15:22 ` Andy Lutomirski
2017-06-21 5:22 ` [PATCH v3 07/11] x86/mm: Stop calling leave_mm() in idle code Andy Lutomirski
2017-06-21 9:22 ` Thomas Gleixner
2017-06-21 15:16 ` Andy Lutomirski
2017-06-23 9:07 ` Borislav Petkov
2017-06-21 5:22 ` [PATCH v3 08/11] x86/mm: Disable PCID on 32-bit kernels Andy Lutomirski
2017-06-21 9:26 ` Thomas Gleixner
2017-06-23 9:24 ` Borislav Petkov
2017-06-21 5:22 ` [PATCH v3 09/11] x86/mm: Add nopcid to turn off PCID Andy Lutomirski
2017-06-21 9:27 ` Thomas Gleixner
2017-06-23 9:34 ` Borislav Petkov
2017-06-21 5:22 ` [PATCH v3 10/11] x86/mm: Enable CR4.PCIDE on supported systems Andy Lutomirski
2017-06-21 9:39 ` Thomas Gleixner
2017-06-21 13:40 ` Thomas Gleixner
2017-06-21 20:34 ` Andy Lutomirski
2017-06-23 11:50 ` Borislav Petkov
2017-06-23 15:28 ` Andy Lutomirski
2017-06-23 13:35 ` Boris Ostrovsky
2017-06-21 5:22 ` [PATCH v3 11/11] x86/mm: Try to preserve old TLB entries using PCID Andy Lutomirski
2017-06-21 13:38 ` Thomas Gleixner
2017-06-21 13:40 ` Thomas Gleixner
2017-06-22 2:57 ` Andy Lutomirski
2017-06-22 12:21 ` Thomas Gleixner
2017-06-22 18:12 ` Andy Lutomirski
2017-06-22 21:22 ` Thomas Gleixner
2017-06-23 3:09 ` Andy Lutomirski
2017-06-23 7:29 ` Thomas Gleixner
2017-06-22 16:09 ` Nadav Amit
2017-06-22 18:10 ` Andy Lutomirski
2017-06-26 15:58 ` Borislav Petkov
2017-06-21 18:23 ` [PATCH v3 00/11] PCID and improved laziness Linus Torvalds
2017-06-22 5:19 ` Andy Lutomirski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e2903f555bd23f8cf62f34b91895c42f7d4e40e3.1498022414.git.luto@kernel.org \
--to=luto@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=arjan@linux.intel.com \
--cc=bp@alien8.de \
--cc=dave.hansen@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mgorman@suse.de \
--cc=nadav.amit@gmail.com \
--cc=peterz@infradead.org \
--cc=riel@redhat.com \
--cc=torvalds@linux-foundation.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).