From: Alejandro Colomar <alx@kernel.org>
To: Marco Elver <elver@google.com>
Cc: linux-mm@kvack.org, linux-hardening@vger.kernel.org,
Kees Cook <kees@kernel.org>,
Christopher Bazley <chris.bazley.wg14@gmail.com>,
shadow <~hallyn/shadow@lists.sr.ht>,
linux-kernel@vger.kernel.org,
Andrew Morton <akpm@linux-foundation.org>,
kasan-dev@googlegroups.com, Dmitry Vyukov <dvyukov@google.com>,
Alexander Potapenko <glider@google.com>,
Christoph Lameter <cl@linux.com>,
David Rientjes <rientjes@google.com>,
Vlastimil Babka <vbabka@suse.cz>,
Roman Gushchin <roman.gushchin@linux.dev>,
Harry Yoo <harry.yoo@oracle.com>,
Andrew Clayton <andrew@digital-domain.net>,
Sven Schnelle <svens@linux.ibm.com>,
Heiko Carstens <hca@linux.ibm.com>,
Tvrtko Ursulin <tvrtko.ursulin@igalia.com>,
"Huang, Ying" <ying.huang@intel.com>,
Lee Schermerhorn <lee.schermerhorn@hp.com>,
Linus Torvalds <torvalds@linux-foundation.org>,
Christophe JAILLET <christophe.jaillet@wanadoo.fr>,
Hyeonggon Yoo <42.hyeyoo@gmail.com>, Chao Yu <chao.yu@oppo.com>
Subject: Re: [RFC v3 3/7] mm: Use seprintf() instead of less ergonomic APIs
Date: Mon, 7 Jul 2025 16:39:37 +0200 [thread overview]
Message-ID: <kicfhrecpahv5kkawnnazsuterxjoqscwf3rb4u6in5gig2bq6@jbt6dwnzs67r> (raw)
In-Reply-To: <CANpmjNMPWWdushTvUqYJzqQJz4SJLgPggH9cs4KPob_9=1T-nw@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 17933 bytes --]
Hi Marco,
On Mon, Jul 07, 2025 at 09:44:09AM +0200, Marco Elver wrote:
> On Mon, 7 Jul 2025 at 07:06, Alejandro Colomar <alx@kernel.org> wrote:
> >
> > While doing this, I detected some anomalies in the existing code:
> >
> > mm/kfence/kfence_test.c:
> >
> > - The last call to scnprintf() did increment 'cur', but it's
> > unused after that, so it was dead code. I've removed the dead
> > code in this patch.
>
> That was done to be consistent with the other code for readability,
> and to be clear where the next bytes should be appended (if someone
> decides to append more). There is no runtime dead code, the compiler
> optimizes away the assignment. But I'm indifferent, so removing the
> assignment is fine if you prefer that.
Yeah, I guessed that might be the reason. I'm fine restoring it if you
prefer it. I tend to use -Wunused-but-set-variable, but if it is not
used here and doesn't trigger, I guess it's fine to keep it.
> Did you run the tests? Do they pass?
I don't know how to run them. I've only built the kernel. If you point
me to instructions on how to run them, I'll do so. Thanks!
> > - 'end' is calculated as
> >
> > end = &expect[0][sizeof(expect[0] - 1)];
> >
> > However, the '-1' doesn't seem to be necessary. When passing
> > $2 to scnprintf(), the size was specified as 'end - cur'.
> > And scnprintf() --just like snprintf(3)--, won't write more
> > than $2 bytes (including the null byte). That means that
> > scnprintf() wouldn't write more than
> >
> > &expect[0][sizeof(expect[0]) - 1] - expect[0]
> >
> > which simplifies to
> >
> > sizeof(expect[0]) - 1
> >
> > bytes. But we have sizeof(expect[0]) bytes available, so
> > we're wasting one byte entirely. This is a benign off-by-one
> > bug. The two occurrences of this bug will be fixed in a
> > following patch in this series.
> >
> > mm/kmsan/kmsan_test.c:
> >
> > The same benign off-by-one bug calculating the remaining size.
>
>
> Same - does the test pass?
Same; built the kernel, but didn't know how to run tests.
Have a lovely day!
Alex
> > mm/mempolicy.c:
> >
> > This file uses the 'p += snprintf()' anti-pattern. That will
> > overflow the pointer on truncation, which has undefined
> > behavior. Using seprintf(), this bug is fixed.
> >
> > As in the previous file, here there was also dead code in the
> > last scnprintf() call, by incrementing a pointer that is not
> > used after the call. I've removed the dead code.
> >
> > mm/page_owner.c:
> >
> > Within print_page_owner(), there are some calls to scnprintf(),
> > which do report truncation. And then there are other calls to
> > snprintf(), where we handle errors (there are two 'goto err').
> >
> > I've kept the existing error handling, as I trust it's there for
> > a good reason (i.e., we may want to avoid calling
> > print_page_owner_memcg() if we truncated before). Please review
> > if this amount of error handling is the right one, or if we want
> > to add or remove some. For seprintf(), a single test for null
> > after the last call is enough to detect truncation.
> >
> > mm/slub.c:
> >
> > Again, the 'p += snprintf()' anti-pattern. This is UB, and by
> > using seprintf() we've fixed the bug.
> >
> > Fixes: f99e12b21b84 (2021-07-30; "kfence: add function to mask address bits")
> > [alx: that commit introduced dead code]
> > Fixes: af649773fb25 (2024-07-17; "mm/numa_balancing: teach mpol_to_str about the balancing mode")
> > [alx: that commit added p+=snprintf() calls, which are UB]
> > Fixes: 2291990ab36b (2008-04-28; "mempolicy: clean-up mpol-to-str() mempolicy formatting")
> > [alx: that commit changed p+=sprintf() into p+=snprintf(), which is still UB]
> > Fixes: 948927ee9e4f (2013-11-13; "mm, mempolicy: make mpol_to_str robust and always succeed")
> > [alx: that commit changes old code into p+=snprintf(), which is still UB]
> > [alx: that commit also produced dead code by leaving the last 'p+=...']
> > Fixes: d65360f22406 (2022-09-26; "mm/slub: clean up create_unique_id()")
> > [alx: that commit changed p+=sprintf() into p+=snprintf(), which is still UB]
> > Cc: Kees Cook <kees@kernel.org>
> > Cc: Christopher Bazley <chris.bazley.wg14@gmail.com>
> > Cc: Sven Schnelle <svens@linux.ibm.com>
> > Cc: Marco Elver <elver@google.com>
> > Cc: Heiko Carstens <hca@linux.ibm.com>
> > Cc: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
> > Cc: "Huang, Ying" <ying.huang@intel.com>
> > Cc: Andrew Morton <akpm@linux-foundation.org>
> > Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
> > Cc: Linus Torvalds <torvalds@linux-foundation.org>
> > Cc: David Rientjes <rientjes@google.com>
> > Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
> > Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
> > Cc: Chao Yu <chao.yu@oppo.com>
> > Cc: Vlastimil Babka <vbabka@suse.cz>
> > Signed-off-by: Alejandro Colomar <alx@kernel.org>
> > ---
> > mm/kfence/kfence_test.c | 24 ++++++++++++------------
> > mm/kmsan/kmsan_test.c | 4 ++--
> > mm/mempolicy.c | 18 +++++++++---------
> > mm/page_owner.c | 32 +++++++++++++++++---------------
> > mm/slub.c | 5 +++--
> > 5 files changed, 43 insertions(+), 40 deletions(-)
> >
> > diff --git a/mm/kfence/kfence_test.c b/mm/kfence/kfence_test.c
> > index 00034e37bc9f..ff734c514c03 100644
> > --- a/mm/kfence/kfence_test.c
> > +++ b/mm/kfence/kfence_test.c
> > @@ -113,26 +113,26 @@ static bool report_matches(const struct expect_report *r)
> > end = &expect[0][sizeof(expect[0]) - 1];
> > switch (r->type) {
> > case KFENCE_ERROR_OOB:
> > - cur += scnprintf(cur, end - cur, "BUG: KFENCE: out-of-bounds %s",
> > + cur = seprintf(cur, end, "BUG: KFENCE: out-of-bounds %s",
> > get_access_type(r));
> > break;
> > case KFENCE_ERROR_UAF:
> > - cur += scnprintf(cur, end - cur, "BUG: KFENCE: use-after-free %s",
> > + cur = seprintf(cur, end, "BUG: KFENCE: use-after-free %s",
> > get_access_type(r));
> > break;
> > case KFENCE_ERROR_CORRUPTION:
> > - cur += scnprintf(cur, end - cur, "BUG: KFENCE: memory corruption");
> > + cur = seprintf(cur, end, "BUG: KFENCE: memory corruption");
> > break;
> > case KFENCE_ERROR_INVALID:
> > - cur += scnprintf(cur, end - cur, "BUG: KFENCE: invalid %s",
> > + cur = seprintf(cur, end, "BUG: KFENCE: invalid %s",
> > get_access_type(r));
> > break;
> > case KFENCE_ERROR_INVALID_FREE:
> > - cur += scnprintf(cur, end - cur, "BUG: KFENCE: invalid free");
> > + cur = seprintf(cur, end, "BUG: KFENCE: invalid free");
> > break;
> > }
> >
> > - scnprintf(cur, end - cur, " in %pS", r->fn);
> > + seprintf(cur, end, " in %pS", r->fn);
> > /* The exact offset won't match, remove it; also strip module name. */
> > cur = strchr(expect[0], '+');
> > if (cur)
> > @@ -144,26 +144,26 @@ static bool report_matches(const struct expect_report *r)
> >
> > switch (r->type) {
> > case KFENCE_ERROR_OOB:
> > - cur += scnprintf(cur, end - cur, "Out-of-bounds %s at", get_access_type(r));
> > + cur = seprintf(cur, end, "Out-of-bounds %s at", get_access_type(r));
> > addr = arch_kfence_test_address(addr);
> > break;
> > case KFENCE_ERROR_UAF:
> > - cur += scnprintf(cur, end - cur, "Use-after-free %s at", get_access_type(r));
> > + cur = seprintf(cur, end, "Use-after-free %s at", get_access_type(r));
> > addr = arch_kfence_test_address(addr);
> > break;
> > case KFENCE_ERROR_CORRUPTION:
> > - cur += scnprintf(cur, end - cur, "Corrupted memory at");
> > + cur = seprintf(cur, end, "Corrupted memory at");
> > break;
> > case KFENCE_ERROR_INVALID:
> > - cur += scnprintf(cur, end - cur, "Invalid %s at", get_access_type(r));
> > + cur = seprintf(cur, end, "Invalid %s at", get_access_type(r));
> > addr = arch_kfence_test_address(addr);
> > break;
> > case KFENCE_ERROR_INVALID_FREE:
> > - cur += scnprintf(cur, end - cur, "Invalid free of");
> > + cur = seprintf(cur, end, "Invalid free of");
> > break;
> > }
> >
> > - cur += scnprintf(cur, end - cur, " 0x%p", (void *)addr);
> > + seprintf(cur, end, " 0x%p", (void *)addr);
> >
> > spin_lock_irqsave(&observed.lock, flags);
> > if (!report_available())
> > diff --git a/mm/kmsan/kmsan_test.c b/mm/kmsan/kmsan_test.c
> > index 9733a22c46c1..a062a46b2d24 100644
> > --- a/mm/kmsan/kmsan_test.c
> > +++ b/mm/kmsan/kmsan_test.c
> > @@ -107,9 +107,9 @@ static bool report_matches(const struct expect_report *r)
> > cur = expected_header;
> > end = &expected_header[sizeof(expected_header) - 1];
> >
> > - cur += scnprintf(cur, end - cur, "BUG: KMSAN: %s", r->error_type);
> > + cur = seprintf(cur, end, "BUG: KMSAN: %s", r->error_type);
> >
> > - scnprintf(cur, end - cur, " in %s", r->symbol);
> > + seprintf(cur, end, " in %s", r->symbol);
> > /* The exact offset won't match, remove it; also strip module name. */
> > cur = strchr(expected_header, '+');
> > if (cur)
> > diff --git a/mm/mempolicy.c b/mm/mempolicy.c
> > index b28a1e6ae096..c696e4a6f4c2 100644
> > --- a/mm/mempolicy.c
> > +++ b/mm/mempolicy.c
> > @@ -3359,6 +3359,7 @@ int mpol_parse_str(char *str, struct mempolicy **mpol)
> > void mpol_to_str(char *buffer, int maxlen, struct mempolicy *pol)
> > {
> > char *p = buffer;
> > + char *e = buffer + maxlen;
> > nodemask_t nodes = NODE_MASK_NONE;
> > unsigned short mode = MPOL_DEFAULT;
> > unsigned short flags = 0;
> > @@ -3384,33 +3385,32 @@ void mpol_to_str(char *buffer, int maxlen, struct mempolicy *pol)
> > break;
> > default:
> > WARN_ON_ONCE(1);
> > - snprintf(p, maxlen, "unknown");
> > + seprintf(p, e, "unknown");
> > return;
> > }
> >
> > - p += snprintf(p, maxlen, "%s", policy_modes[mode]);
> > + p = seprintf(p, e, "%s", policy_modes[mode]);
> >
> > if (flags & MPOL_MODE_FLAGS) {
> > - p += snprintf(p, buffer + maxlen - p, "=");
> > + p = seprintf(p, e, "=");
> >
> > /*
> > * Static and relative are mutually exclusive.
> > */
> > if (flags & MPOL_F_STATIC_NODES)
> > - p += snprintf(p, buffer + maxlen - p, "static");
> > + p = seprintf(p, e, "static");
> > else if (flags & MPOL_F_RELATIVE_NODES)
> > - p += snprintf(p, buffer + maxlen - p, "relative");
> > + p = seprintf(p, e, "relative");
> >
> > if (flags & MPOL_F_NUMA_BALANCING) {
> > if (!is_power_of_2(flags & MPOL_MODE_FLAGS))
> > - p += snprintf(p, buffer + maxlen - p, "|");
> > - p += snprintf(p, buffer + maxlen - p, "balancing");
> > + p = seprintf(p, e, "|");
> > + p = seprintf(p, e, "balancing");
> > }
> > }
> >
> > if (!nodes_empty(nodes))
> > - p += scnprintf(p, buffer + maxlen - p, ":%*pbl",
> > - nodemask_pr_args(&nodes));
> > + seprintf(p, e, ":%*pbl", nodemask_pr_args(&nodes));
> > }
> >
> > #ifdef CONFIG_SYSFS
> > diff --git a/mm/page_owner.c b/mm/page_owner.c
> > index cc4a6916eec6..5811738e3320 100644
> > --- a/mm/page_owner.c
> > +++ b/mm/page_owner.c
> > @@ -496,7 +496,7 @@ void pagetypeinfo_showmixedcount_print(struct seq_file *m,
> > /*
> > * Looking for memcg information and print it out
> > */
> > -static inline int print_page_owner_memcg(char *kbuf, size_t count, int ret,
> > +static inline char *print_page_owner_memcg(char *p, const char end[0],
> > struct page *page)
> > {
> > #ifdef CONFIG_MEMCG
> > @@ -511,8 +511,7 @@ static inline int print_page_owner_memcg(char *kbuf, size_t count, int ret,
> > goto out_unlock;
> >
> > if (memcg_data & MEMCG_DATA_OBJEXTS)
> > - ret += scnprintf(kbuf + ret, count - ret,
> > - "Slab cache page\n");
> > + p = seprintf(p, end, "Slab cache page\n");
> >
> > memcg = page_memcg_check(page);
> > if (!memcg)
> > @@ -520,7 +519,7 @@ static inline int print_page_owner_memcg(char *kbuf, size_t count, int ret,
> >
> > online = (memcg->css.flags & CSS_ONLINE);
> > cgroup_name(memcg->css.cgroup, name, sizeof(name));
> > - ret += scnprintf(kbuf + ret, count - ret,
> > + p = seprintf(p, end,
> > "Charged %sto %smemcg %s\n",
> > PageMemcgKmem(page) ? "(via objcg) " : "",
> > online ? "" : "offline ",
> > @@ -529,7 +528,7 @@ static inline int print_page_owner_memcg(char *kbuf, size_t count, int ret,
> > rcu_read_unlock();
> > #endif /* CONFIG_MEMCG */
> >
> > - return ret;
> > + return p;
> > }
> >
> > static ssize_t
> > @@ -538,14 +537,16 @@ print_page_owner(char __user *buf, size_t count, unsigned long pfn,
> > depot_stack_handle_t handle)
> > {
> > int ret, pageblock_mt, page_mt;
> > - char *kbuf;
> > + char *kbuf, *p, *e;
> >
> > count = min_t(size_t, count, PAGE_SIZE);
> > kbuf = kmalloc(count, GFP_KERNEL);
> > if (!kbuf)
> > return -ENOMEM;
> >
> > - ret = scnprintf(kbuf, count,
> > + p = kbuf;
> > + e = kbuf + count;
> > + p = seprintf(p, e,
> > "Page allocated via order %u, mask %#x(%pGg), pid %d, tgid %d (%s), ts %llu ns\n",
> > page_owner->order, page_owner->gfp_mask,
> > &page_owner->gfp_mask, page_owner->pid,
> > @@ -555,7 +556,7 @@ print_page_owner(char __user *buf, size_t count, unsigned long pfn,
> > /* Print information relevant to grouping pages by mobility */
> > pageblock_mt = get_pageblock_migratetype(page);
> > page_mt = gfp_migratetype(page_owner->gfp_mask);
> > - ret += scnprintf(kbuf + ret, count - ret,
> > + p = seprintf(p, e,
> > "PFN 0x%lx type %s Block %lu type %s Flags %pGp\n",
> > pfn,
> > migratetype_names[page_mt],
> > @@ -563,22 +564,23 @@ print_page_owner(char __user *buf, size_t count, unsigned long pfn,
> > migratetype_names[pageblock_mt],
> > &page->flags);
> >
> > - ret += stack_depot_snprint(handle, kbuf + ret, count - ret, 0);
> > - if (ret >= count)
> > - goto err;
> > + p = stack_depot_seprint(handle, p, e, 0);
> > + if (p == NULL)
> > + goto err; // XXX: Should we remove this error handling?
> >
> > if (page_owner->last_migrate_reason != -1) {
> > - ret += scnprintf(kbuf + ret, count - ret,
> > + p = seprintf(p, e,
> > "Page has been migrated, last migrate reason: %s\n",
> > migrate_reason_names[page_owner->last_migrate_reason]);
> > }
> >
> > - ret = print_page_owner_memcg(kbuf, count, ret, page);
> > + p = print_page_owner_memcg(p, e, page);
> >
> > - ret += snprintf(kbuf + ret, count - ret, "\n");
> > - if (ret >= count)
> > + p = seprintf(p, e, "\n");
> > + if (p == NULL)
> > goto err;
> >
> > + ret = p - kbuf;
> > if (copy_to_user(buf, kbuf, ret))
> > ret = -EFAULT;
> >
> > diff --git a/mm/slub.c b/mm/slub.c
> > index be8b09e09d30..b67c6ca0d0f7 100644
> > --- a/mm/slub.c
> > +++ b/mm/slub.c
> > @@ -7451,6 +7451,7 @@ static char *create_unique_id(struct kmem_cache *s)
> > {
> > char *name = kmalloc(ID_STR_LENGTH, GFP_KERNEL);
> > char *p = name;
> > + char *e = name + ID_STR_LENGTH;
> >
> > if (!name)
> > return ERR_PTR(-ENOMEM);
> > @@ -7475,9 +7476,9 @@ static char *create_unique_id(struct kmem_cache *s)
> > *p++ = 'A';
> > if (p != name + 1)
> > *p++ = '-';
> > - p += snprintf(p, ID_STR_LENGTH - (p - name), "%07u", s->size);
> > + p = seprintf(p, e, "%07u", s->size);
> >
> > - if (WARN_ON(p > name + ID_STR_LENGTH - 1)) {
> > + if (WARN_ON(p == NULL)) {
> > kfree(name);
> > return ERR_PTR(-EINVAL);
> > }
> > --
> > 2.50.0
> >
--
<https://www.alejandro-colomar.es/>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
next prev parent reply other threads:[~2025-07-07 14:39 UTC|newest]
Thread overview: 98+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-07-05 20:33 [RFC v1 0/3] Add and use seprintf() instead of less ergonomic APIs Alejandro Colomar
2025-07-05 20:33 ` [RFC v1 1/3] vsprintf: Add [v]seprintf(), [v]stprintf() Alejandro Colomar
2025-07-05 20:40 ` Alejandro Colomar
2025-07-07 9:47 ` Alexander Potapenko
2025-07-07 14:59 ` Alejandro Colomar
2025-07-05 20:33 ` [RFC v1 2/3] stacktrace, stackdepot: Add seprintf()-like variants of functions Alejandro Colomar
2025-07-05 20:33 ` [RFC v1 3/3] mm: Use seprintf() instead of less ergonomic APIs Alejandro Colomar
2025-07-05 21:54 ` Alejandro Colomar
2025-07-06 17:37 ` [RFC v2 0/5] Add and use " Alejandro Colomar
2025-07-06 17:37 ` [RFC v2 1/5] vsprintf: Add [v]seprintf(), [v]stprintf() Alejandro Colomar
2025-07-06 17:37 ` [RFC v2 2/5] stacktrace, stackdepot: Add seprintf()-like variants of functions Alejandro Colomar
2025-07-06 17:37 ` [RFC v2 3/5] mm: Use seprintf() instead of less ergonomic APIs Alejandro Colomar
2025-07-06 17:37 ` [RFC v2 4/5] array_size.h: Add ENDOF() Alejandro Colomar
2025-07-06 17:37 ` [RFC v2 5/5] mm: Fix benign off-by-one bugs Alejandro Colomar
2025-07-07 5:06 ` [RFC v3 0/7] Add and use seprintf() instead of less ergonomic APIs Alejandro Colomar
2025-07-07 5:06 ` [RFC v3 1/7] vsprintf: Add [v]seprintf(), [v]stprintf() Alejandro Colomar
2025-07-07 5:06 ` [RFC v3 2/7] stacktrace, stackdepot: Add seprintf()-like variants of functions Alejandro Colomar
2025-07-07 5:06 ` [RFC v3 3/7] mm: Use seprintf() instead of less ergonomic APIs Alejandro Colomar
2025-07-07 7:44 ` Marco Elver
2025-07-07 14:39 ` Alejandro Colomar [this message]
2025-07-07 14:58 ` Marco Elver
2025-07-07 18:51 ` Alejandro Colomar
2025-07-07 19:08 ` Marco Elver
2025-07-07 20:53 ` Alejandro Colomar
2025-07-07 19:17 ` Linus Torvalds
2025-07-07 19:35 ` Al Viro
2025-07-07 20:46 ` Linus Torvalds
2025-07-07 20:29 ` Alejandro Colomar
2025-07-07 20:49 ` Linus Torvalds
2025-07-07 21:05 ` Alejandro Colomar
2025-07-07 21:26 ` Alejandro Colomar
2025-07-07 22:17 ` Linus Torvalds
2025-07-08 2:20 ` Alejandro Colomar
2025-07-12 20:58 ` Christopher Bazley
2025-07-14 7:57 ` Christopher Bazley
2025-07-07 5:06 ` [RFC v3 4/7] array_size.h: Add ENDOF() Alejandro Colomar
2025-07-07 5:06 ` [RFC v3 5/7] mm: Fix benign off-by-one bugs Alejandro Colomar
2025-07-07 7:46 ` Marco Elver
2025-07-07 7:53 ` Michal Hocko
2025-07-07 14:42 ` Alejandro Colomar
2025-07-07 15:12 ` Michal Hocko
2025-07-07 15:29 ` Alejandro Colomar
2025-07-07 5:06 ` [RFC v3 6/7] sprintf: Add [V]STPRINTF() Alejandro Colomar
2025-07-07 5:06 ` [RFC v3 7/7] mm: Use [V]STPRINTF() to avoid specifying the array size Alejandro Colomar
2025-07-07 5:11 ` [RFC v3 0/7] Add and use seprintf() instead of less ergonomic APIs Alejandro Colomar
2025-07-10 2:47 ` [RFC v4 0/7] Add and use sprintf_end() " Alejandro Colomar
2025-07-10 2:47 ` alx-0049r2 - add seprintf() Alejandro Colomar
2025-07-10 2:48 ` [RFC v4 1/7] vsprintf: Add [v]sprintf_end() Alejandro Colomar
2025-07-10 2:48 ` [RFC v4 2/7] stacktrace, stackdepot: Add sprintf_end()-like variants of functions Alejandro Colomar
2025-07-10 2:48 ` [RFC v4 3/7] mm: Use sprintf_end() instead of less ergonomic APIs Alejandro Colomar
2025-07-10 2:48 ` [RFC v4 4/7] array_size.h: Add ENDOF() Alejandro Colomar
2025-07-10 2:48 ` [RFC v4 5/7] mm: Fix benign off-by-one bugs Alejandro Colomar
2025-07-10 2:48 ` [RFC v4 6/7] sprintf: Add [V]SPRINTF_END() Alejandro Colomar
2025-07-10 15:52 ` Linus Torvalds
2025-07-10 18:30 ` Alejandro Colomar
2025-07-10 21:21 ` Alejandro Colomar
2025-07-10 22:08 ` Linus Torvalds
2025-07-10 2:49 ` [RFC v4 7/7] mm: Use [V]SPRINTF_END() to avoid specifying the array size Alejandro Colomar
2025-07-10 21:30 ` [RFC v5 0/7] Add and use sprintf_{end,array}() instead of less ergonomic APIs Alejandro Colomar
2025-07-10 21:30 ` [RFC v5 1/7] vsprintf: Add [v]sprintf_end() Alejandro Colomar
2025-07-10 21:30 ` [RFC v5 2/7] stacktrace, stackdepot: Add sprintf_end()-like variants of functions Alejandro Colomar
2025-07-10 21:30 ` [RFC v5 3/7] mm: Use sprintf_end() instead of less ergonomic APIs Alejandro Colomar
2025-07-10 21:31 ` [RFC v5 4/7] array_size.h: Add ENDOF() Alejandro Colomar
2025-07-10 21:31 ` [RFC v5 5/7] mm: Fix benign off-by-one bugs Alejandro Colomar
2025-07-10 21:31 ` [RFC v5 6/7] sprintf: Add [v]sprintf_array() Alejandro Colomar
2025-07-10 21:58 ` Linus Torvalds
2025-07-10 23:23 ` Alejandro Colomar
2025-07-10 23:24 ` Alejandro Colomar
2025-07-11 0:19 ` Alejandro Colomar
2025-07-11 17:43 ` David Laight
2025-07-11 19:17 ` Alejandro Colomar
2025-07-11 19:21 ` Alejandro Colomar
2025-07-11 6:05 ` Martin Uecker
2025-07-11 6:19 ` Martin Uecker
2025-07-11 17:45 ` David Laight
2025-07-11 17:58 ` Linus Torvalds
2025-07-11 19:24 ` Matthew Wilcox
2025-07-15 5:19 ` Kees Cook
2025-07-15 6:24 ` Martin Uecker
2025-07-17 23:44 ` Kees Cook
2025-07-15 7:08 ` Alejandro Colomar
2025-07-17 23:47 ` Kees Cook
2025-07-18 0:56 ` Alejandro Colomar
2025-07-11 18:01 ` Martin Uecker
2025-07-10 21:31 ` [RFC v5 7/7] mm: Use [v]sprintf_array() to avoid specifying the array size Alejandro Colomar
2025-07-11 1:56 ` [RFC v6 0/8] Add and use sprintf_{end,trunc,array}() instead of less ergonomic APIs Alejandro Colomar
2025-07-11 1:56 ` [RFC v6 1/8] vsprintf: Add [v]sprintf_trunc() Alejandro Colomar
2025-07-11 1:56 ` [RFC v6 2/8] vsprintf: Add [v]sprintf_end() Alejandro Colomar
2025-07-11 1:56 ` [RFC v6 3/8] sprintf: Add [v]sprintf_array() Alejandro Colomar
2025-07-11 1:56 ` [RFC v6 4/8] stacktrace, stackdepot: Add sprintf_end()-like variants of functions Alejandro Colomar
2025-07-11 1:57 ` [RFC v6 5/8] mm: Use sprintf_end() instead of less ergonomic APIs Alejandro Colomar
2025-07-11 1:57 ` [RFC v6 6/8] array_size.h: Add ENDOF() Alejandro Colomar
2025-07-11 1:57 ` [RFC v6 7/8] mm: Fix benign off-by-one bugs Alejandro Colomar
2025-07-11 1:57 ` [RFC v6 8/8] mm: Use [v]sprintf_array() to avoid specifying the array size Alejandro Colomar
2025-07-08 6:43 ` [RFC v1 0/3] Add and use seprintf() instead of less ergonomic APIs Rasmus Villemoes
2025-07-08 11:36 ` Alejandro Colomar
2025-07-08 13:51 ` Rasmus Villemoes
2025-07-08 16:14 ` Alejandro Colomar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=kicfhrecpahv5kkawnnazsuterxjoqscwf3rb4u6in5gig2bq6@jbt6dwnzs67r \
--to=alx@kernel.org \
--cc=42.hyeyoo@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=andrew@digital-domain.net \
--cc=chao.yu@oppo.com \
--cc=chris.bazley.wg14@gmail.com \
--cc=christophe.jaillet@wanadoo.fr \
--cc=cl@linux.com \
--cc=dvyukov@google.com \
--cc=elver@google.com \
--cc=glider@google.com \
--cc=harry.yoo@oracle.com \
--cc=hca@linux.ibm.com \
--cc=kasan-dev@googlegroups.com \
--cc=kees@kernel.org \
--cc=lee.schermerhorn@hp.com \
--cc=linux-hardening@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=rientjes@google.com \
--cc=roman.gushchin@linux.dev \
--cc=svens@linux.ibm.com \
--cc=torvalds@linux-foundation.org \
--cc=tvrtko.ursulin@igalia.com \
--cc=vbabka@suse.cz \
--cc=ying.huang@intel.com \
--cc=~hallyn/shadow@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).