From: sashiko-bot@kernel.org
To: "Kanchana P. Sridhar" <kanchanapsridhar2026@gmail.com>,
hannes@cmpxchg.org, yosry@kernel.org, nphamcs@gmail.com,
chengming.zhou@linux.dev, akpm@linux-foundation.org,
linux-mm@kvack.org, herbert@gondor.apana.org.au,
davem@davemloft.net, linux-crypto@vger.kernel.org
Cc: rientjes@google.com, willy@infradead.org, senozhatsky@chromium.org
Subject: Re: [PATCH v4 8/8] mm: zswap: Batched zswap_compress() for storing large folios in batches.
Date: Sat, 21 Nov 2026 04:20:06 +0000 [thread overview]
Message-ID: <sashiko-outbox-226638@kernel.org> (raw)
In-Reply-To: <20261120041906.5785-9-kanchanapsridhar2026@gmail.com>
Thank you for your contribution! Sashiko AI review found 3 potential
issues to consider:
- [High] mm: zswap: invalid and unreset dst scatterlist lengths in
zswap_compress()
- [High] mm: zswap: unterminated dst scatterlist slice passed in
zswap_compress()
- [Medium] mm: zswap: unsigned sg->length check and error accounting in
zswap_compress()
--
commit a77cc3e636d5134b6371aa977bb1025c031583c2
Author: Kanchana P. Sridhar <kanchanapsridhar2026@gmail.com>
mm: zswap: Batched zswap_compress() for storing large folios in batches.
This commit replaces the per-page zswap_compress() call in
zswap_store_pages() with a batched zswap_compress() and
zswap_update_entries() that compress up to ZSWAP_MAX_BATCH_SIZE pages per
batch using a per-CPU scatterlist table mapped to destination buffers.
> diff --git a/mm/zswap.c b/mm/zswap.c
> index 5e1fb5624ffb8..56354a568bad0 100644
> --- a/mm/zswap.c
> +++ b/mm/zswap.c
[ ... ]
> @@ -949,6 +971,26 @@ static int zswap_cpu_comp_prepare(unsigned int cpu, struct hlist_node *node)
> }
> }
>
> + acomp_ctx->comp.sg_table = kmalloc(sizeof(*acomp_ctx->comp.sg_table),
> + GFP_KERNEL);
> + if (!acomp_ctx->comp.sg_table) {
> + ret = -ENOMEM;
> + goto req_fail;
> + }
> +
> + if (sg_alloc_table(acomp_ctx->comp.sg_table, ZSWAP_MAX_BATCH_SIZE,
> + GFP_KERNEL)) {
> + ret = -ENOMEM;
> + goto req_fail;
> + }
> +
> + /*
> + * Statically map the per-CPU destination buffers to the per-CPU
> + * SG lists; crucial for performance.
> + */
> + for_each_sg(acomp_ctx->comp.sg_table->sgl, sg, ZSWAP_MAX_BATCH_SIZE, i)
> + sg_set_buf(sg, acomp_ctx->comp.buffers[i], PAGE_SIZE);
> +
[ ... ]
> @@ -965,88 +1007,179 @@ static int zswap_cpu_comp_prepare(unsigned int cpu, struct hlist_node *node)
[ ... ]
> +static bool zswap_compress(struct zswap_store_context *zc)
> +{
> + u8 nr_batch_pages, batch_start, comp_batch_iter;
> + struct scatterlist *sg, *dst_sg;
> + unsigned int slen;
> + int err;
>
> /*
> + * @nr_batch_pages is constrained by the per-CPU comp_ctx's compressor
> + * batch size and the @zc->nr_pages in this store batch. @slen indicates
> + * the total source length bytes for @nr_batch_pages.
> */
> + nr_batch_pages = min(zc->comp_ctx->compr_batch_size, zc->nr_pages);
>
> /*
> + * Compress the @nr_pages in @folio starting at index @folio_start
> + * in batches of @nr_batch_pages.
> */
> + for (batch_start = 0; batch_start < zc->nr_pages;
> + batch_start += nr_batch_pages) {
> + /*
> + * Clamp the last iteration's batch size if the compressor's
> + * batch_size does not evenly divide @zc->nr_pages.
> + */
> + nr_batch_pages = min(nr_batch_pages, zc->nr_pages - batch_start);
> + slen = nr_batch_pages * PAGE_SIZE;
> +
> + /*
> + * Send @nr_batch_pages to crypto_acomp for compression:
> + *
> + * These pages are in @zc->folio's range of indices in the
> + * interval:
> + * [@zc->folio_start + @batch_start,
> + * @zc->folio_start + @batch_start + @nr_batch_pages).
> + *
> + * The source folio pages in the batch are directly submitted to
> + * crypto_acomp via acomp_request_set_src_folio().
> + */
> + acomp_request_set_src_folio(zc->comp_ctx->areq.req, zc->folio,
> + (zc->folio_start + batch_start) * PAGE_SIZE,
> + slen);
> +
> + dst_sg = zc->comp_ctx->sg_table->sgl + batch_start;
> + dst_sg->length = slen;
[Severity: High]
Does setting only dst_sg->length = slen overrun acomp_ctx->comp.buffers[]
and leave dst_sg[1 .. nr_batch_pages - 1].length uninitialized when
nr_batch_pages > 1?
Each entry in acomp_ctx->comp.sg_table->sgl is mapped to a single
PAGE_SIZE buffer in acomp_ctx->comp.buffers[i], and earlier runs overwrite
each entry's sg->length with compressed lengths or negative error codes.
When a batching compressor runs with nr_batch_pages > 1, dst_sg[0].length
is set to nr_batch_pages * PAGE_SIZE (exceeding its PAGE_SIZE buffer),
while dst_sg[1 .. nr_batch_pages - 1].length are not reset to PAGE_SIZE.
If the compressor fails when zc->wb_enabled is true without updating
dst_sg[1 .. nr_batch_pages - 1].length, any entry still holding a stale
compressed length (0 < sg->length < PAGE_SIZE) from a previous call will
skip the PAGE_SIZE fallback and cause zswap_update_entries() to store
stale data from the previous folio.
Each of the nr_batch_pages scatterlist entries in dst_sg needs its length
reset to PAGE_SIZE before crypto_acomp_compress().
> +
> + /*
> + * The per-CPU @zc->comp_ctx->sg_table scatterlists are statically
> + * mapped to the per-CPU dst @buffers at pool creation time.
> + * There are ZSWAP_MAX_BATCH_SIZE per-CPU SG lists and dst
> + * buffers allocated for all compressors.
> + */
> + acomp_request_set_dst_sg(zc->comp_ctx->areq.req, dst_sg, slen);
[Severity: High]
Isn't dst_sg an unterminated scatterlist slice whenever
batch_start + nr_batch_pages < ZSWAP_MAX_BATCH_SIZE?
sg_alloc_table() only sets SG_END on sgl[ZSWAP_MAX_BATCH_SIZE - 1], so
passing dst_sg as req->dst leaves sg_nents(req->dst) equal to
ZSWAP_MAX_BATCH_SIZE - batch_start (4, 3, or 2 instead of nr_batch_pages).
In-tree hardware acomp drivers rely on sg_nents(req->dst):
iaa_comp_acompress() falls back to software deflate whenever
sg_nents(req->dst) > 1 (affecting all order-0 folios and 3 of every 4
pages in a batch), while __qat_bl_sgl_to_bufl() and
hisi_acc_sg_buf_map_to_hw_sgl() walk and DMA-map all sg_nents(req->dst)
entries up to sgl[3] using their sg->length fields, which can still hold a
negative errno such as (unsigned int)-ENOSPC (~4 GiB) left behind by a
prior failed batch.
> +
> + err = crypto_wait_req(crypto_acomp_compress(zc->comp_ctx->areq.req),
> + &zc->comp_ctx->areq.wait);
> +
> + /*
> + * If a page cannot be compressed into a size smaller than
> + * PAGE_SIZE, save the content as is without a compression, to
> + * keep the LRU order of writebacks. If writeback is disabled,
> + * reject the page since it only adds metadata overhead.
> + * swap_writeout() will put the page back to the active LRU list
> + * in the case.
> + */
> + if (err && !zc->wb_enabled)
> + goto compress_error;
> +
> + /*
> + * For each output SG list in @acomp_ctx->req->sg_table->sgl,
> + * the @sg->length should be set to either the page's compressed
> + * length (success), or it's negative value compression error.
> + */
> + for_each_sg(dst_sg, sg, nr_batch_pages, comp_batch_iter) {
> + if (((int)sg->length <= 0) || (sg->length >= PAGE_SIZE)) {
> + if (!zc->wb_enabled) {
> + if (sg->length == PAGE_SIZE)
> + sg->length = -ENOSPC;
> + else if (WARN_ON_ONCE(!sg->length || sg->length > PAGE_SIZE))
> + sg->length = -EINVAL;
> + goto compress_error;
> + }
> +
> + sg->length = PAGE_SIZE;
> + }
> + }
> }
>
> + return zswap_update_entries(zc);
>
> +compress_error:
> + for_each_sg(dst_sg, sg, nr_batch_pages, comp_batch_iter) {
> + if ((int)sg->length < 0) {
> + if ((int)sg->length == -ENOSPC)
> + zswap_reject_compress_poor++;
> + else
> + zswap_reject_compress_fail++;
> + }
> + }
>
> + return false;
> }
[Severity: Medium]
Won't evaluating sg->length > PAGE_SIZE on an unsigned int trigger
WARN_ON_ONCE() whenever sg->length holds a negative error code?
Because sg->length is unsigned, a negative error code in sg->length (such
as -ENOSPC from a failed page in a batch) satisfies sg->length > PAGE_SIZE
when !zc->wb_enabled, firing a spurious WARN_ON_ONCE() and overwriting the
error code with -EINVAL so compress_error increments
zswap_reject_compress_fail instead of zswap_reject_compress_poor.
Conversely, if crypto_acomp_compress() returns an early request-level
error in err before writing negative error codes into dst_sg->length,
jumping to compress_error leaves all sg->length values positive and
returns false without incrementing either rejection counter.
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261120041906.5785-1-kanchanapsridhar2026@gmail.com?part=8
next prev parent reply other threads:[~2026-11-21 4:20 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-20 4:18 [PATCH v4 0/8] Batched zswap_store() framework with compression batching Kanchana P. Sridhar
2026-11-20 4:18 ` [PATCH v4 1/8] crypto: acomp - Define a unit_size in struct acomp_req to enable batching. mm: zswap: Set the unit size for zswap to PAGE_SIZE Kanchana P. Sridhar
2026-11-20 4:19 ` [PATCH v4 2/8] crypto: acomp - Add bit to indicate segmentation support Kanchana P. Sridhar
2026-11-20 4:19 ` [PATCH v4 3/8] crypto: acomp - Add trivial segmentation wrapper Kanchana P. Sridhar
2026-11-20 4:19 ` [PATCH v4 4/8] crypto: acomp - Add API to get a compression algorithm's batch-size Kanchana P. Sridhar
2026-11-21 4:20 ` sashiko-bot
2026-11-20 4:19 ` [PATCH v4 5/8] mm: zswap: Store the folio's node id in the zswap_entry Kanchana P. Sridhar
2026-11-20 22:46 ` Nhat Pham
2026-11-20 23:01 ` Kanchana P. Sridhar
2026-11-21 4:20 ` sashiko-bot
2026-11-20 4:19 ` [PATCH v4 6/8] mm: zswap: Store large folios in batches Kanchana P. Sridhar
2026-11-20 23:08 ` Nhat Pham
2026-11-20 23:40 ` Kanchana P. Sridhar
2026-11-20 23:25 ` Nhat Pham
2026-11-20 23:51 ` Kanchana P. Sridhar
2026-11-20 4:19 ` [PATCH v4 7/8] mm: zswap: Refactor and optimize zswap_store_pages() batch operations Kanchana P. Sridhar
2026-11-20 23:45 ` Nhat Pham
2026-11-21 1:36 ` Kanchana P. Sridhar
2026-11-20 4:19 ` [PATCH v4 8/8] mm: zswap: Batched zswap_compress() for storing large folios in batches Kanchana P. Sridhar
2026-11-20 23:55 ` Nhat Pham
2026-11-21 1:17 ` Kanchana P. Sridhar
2026-11-21 3:24 ` Kanchana P. Sridhar
2026-11-21 4:20 ` sashiko-bot [this message]
2026-11-20 23:16 ` [PATCH v4 0/8] Batched zswap_store() framework with compression batching Nhat Pham
2026-11-21 1:04 ` Kanchana P. Sridhar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=sashiko-outbox-226638@kernel.org \
--to=sashiko-bot@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=chengming.zhou@linux.dev \
--cc=davem@davemloft.net \
--cc=hannes@cmpxchg.org \
--cc=herbert@gondor.apana.org.au \
--cc=kanchanapsridhar2026@gmail.com \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=nphamcs@gmail.com \
--cc=rientjes@google.com \
--cc=sashiko-reviews@lists.linux.dev \
--cc=senozhatsky@chromium.org \
--cc=willy@infradead.org \
--cc=yosry@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox