From: Seungwon Jeon <tgih.jun@samsung.com>
To: linux-mmc@vger.kernel.org
Cc: 'Chris Ball' <chris@printf.net>,
'Ulf Hansson' <ulf.hansson@linaro.org>,
'Jaehoon Chung' <jh80.chung@samsung.com>,
'Jackey Shen' <jackey.shen@amd.com>,
'Alim Akhtar' <alim.akhtar@samsung.com>
Subject: [PATCH v6 1/6] mmc: drop the speed mode of card's state
Date: Fri, 18 Apr 2014 22:36:31 +0900 [thread overview]
Message-ID: <001401cf5b0b$3528ade0$9f7a09a0$%jun@samsung.com> (raw)
In-Reply-To:
Timing mode identifier has same role and can take the place
of speed mode. This change removes all related speed mode.
Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Jaehoon Chung <jh80.chung@samsung.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
---
drivers/mmc/core/bus.c | 8 ++++----
drivers/mmc/core/core.c | 3 +--
drivers/mmc/core/mmc.c | 11 +++--------
drivers/mmc/core/sd.c | 16 +++-------------
drivers/mmc/core/sd.h | 1 -
drivers/mmc/core/sdio.c | 8 ++------
include/linux/mmc/card.h | 23 ++++++-----------------
include/linux/mmc/host.h | 23 +++++++++++++++++++++++
8 files changed, 42 insertions(+), 51 deletions(-)
diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c
index 8246448..f37e9d6 100644
--- a/drivers/mmc/core/bus.c
+++ b/drivers/mmc/core/bus.c
@@ -341,16 +341,16 @@ int mmc_add_card(struct mmc_card *card)
if (mmc_host_is_spi(card->host)) {
pr_info("%s: new %s%s%s card on SPI\n",
mmc_hostname(card->host),
- mmc_card_highspeed(card) ? "high speed " : "",
- mmc_card_ddr_mode(card) ? "DDR " : "",
+ mmc_card_hs(card) ? "high speed " : "",
+ mmc_card_ddr52(card) ? "DDR " : "",
type);
} else {
pr_info("%s: new %s%s%s%s%s card at address %04x\n",
mmc_hostname(card->host),
mmc_card_uhs(card) ? "ultra high speed " :
- (mmc_card_highspeed(card) ? "high speed " : ""),
+ (mmc_card_hs(card) ? "high speed " : ""),
(mmc_card_hs200(card) ? "HS200 " : ""),
- mmc_card_ddr_mode(card) ? "DDR " : "",
+ mmc_card_ddr52(card) ? "DDR " : "",
uhs_bus_speed_mode, type, card->rca);
}
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index acbc3f2..aa9f679 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -2183,7 +2183,7 @@ int mmc_set_blocklen(struct mmc_card *card, unsigned int blocklen)
{
struct mmc_command cmd = {0};
- if (mmc_card_blockaddr(card) || mmc_card_ddr_mode(card))
+ if (mmc_card_blockaddr(card) || mmc_card_ddr52(card))
return 0;
cmd.opcode = MMC_SET_BLOCKLEN;
@@ -2263,7 +2263,6 @@ static int mmc_do_hw_reset(struct mmc_host *host, int check)
}
}
- host->card->state &= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_DDR);
if (mmc_host_is_spi(host)) {
host->ios.chip_select = MMC_CS_HIGH;
host->ios.bus_mode = MMC_BUSMODE_PUSHPULL;
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index e22d851..db9655f 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -1091,11 +1091,9 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
} else {
if (card->ext_csd.hs_max_dtr > 52000000 &&
host->caps2 & MMC_CAP2_HS200) {
- mmc_card_set_hs200(card);
mmc_set_timing(card->host,
MMC_TIMING_MMC_HS200);
} else {
- mmc_card_set_highspeed(card);
mmc_set_timing(card->host, MMC_TIMING_MMC_HS);
}
}
@@ -1106,10 +1104,10 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
*/
max_dtr = (unsigned int)-1;
- if (mmc_card_highspeed(card) || mmc_card_hs200(card)) {
+ if (mmc_card_hs(card) || mmc_card_hs200(card)) {
if (max_dtr > card->ext_csd.hs_max_dtr)
max_dtr = card->ext_csd.hs_max_dtr;
- if (mmc_card_highspeed(card) && (max_dtr > 52000000))
+ if (mmc_card_hs(card) && (max_dtr > 52000000))
max_dtr = 52000000;
} else if (max_dtr > card->csd.max_dtr) {
max_dtr = card->csd.max_dtr;
@@ -1120,7 +1118,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
/*
* Indicate DDR mode (if supported).
*/
- if (mmc_card_highspeed(card)) {
+ if (mmc_card_hs(card)) {
if ((card->ext_csd.card_type & EXT_CSD_CARD_TYPE_DDR_1_8V)
&& (host->caps & MMC_CAP_1_8V_DDR))
ddr = MMC_1_8V_DDR_MODE;
@@ -1263,7 +1261,6 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
if (err)
goto err;
}
- mmc_card_set_ddr_mode(card);
mmc_set_timing(card->host, MMC_TIMING_MMC_DDR52);
mmc_set_bus_width(card->host, bus_width);
}
@@ -1507,7 +1504,6 @@ static int _mmc_suspend(struct mmc_host *host, bool is_suspend)
err = mmc_sleep(host);
else if (!mmc_host_is_spi(host))
err = mmc_deselect_cards(host);
- host->card->state &= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_200);
if (!err) {
mmc_power_off(host);
@@ -1637,7 +1633,6 @@ static int mmc_power_restore(struct mmc_host *host)
{
int ret;
- host->card->state &= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_200);
mmc_claim_host(host);
ret = mmc_init_card(host, host->card->ocr, host->card);
mmc_release_host(host);
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index 2dd359d..9fc5b31 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -895,7 +895,7 @@ unsigned mmc_sd_get_max_clock(struct mmc_card *card)
{
unsigned max_dtr = (unsigned int)-1;
- if (mmc_card_highspeed(card)) {
+ if (mmc_card_hs(card)) {
if (max_dtr > card->sw_caps.hs_max_dtr)
max_dtr = card->sw_caps.hs_max_dtr;
} else if (max_dtr > card->csd.max_dtr) {
@@ -905,12 +905,6 @@ unsigned mmc_sd_get_max_clock(struct mmc_card *card)
return max_dtr;
}
-void mmc_sd_go_highspeed(struct mmc_card *card)
-{
- mmc_card_set_highspeed(card);
- mmc_set_timing(card->host, MMC_TIMING_SD_HS);
-}
-
/*
* Handle the detection and initialisation of a card.
*
@@ -985,16 +979,13 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr,
err = mmc_sd_init_uhs_card(card);
if (err)
goto free_card;
-
- /* Card is an ultra-high-speed card */
- mmc_card_set_uhs(card);
} else {
/*
* Attempt to change to high-speed (if supported)
*/
err = mmc_sd_switch_hs(card);
if (err > 0)
- mmc_sd_go_highspeed(card);
+ mmc_set_timing(card->host, MMC_TIMING_SD_HS);
else if (err)
goto free_card;
@@ -1089,7 +1080,7 @@ static int _mmc_sd_suspend(struct mmc_host *host)
if (!mmc_host_is_spi(host))
err = mmc_deselect_cards(host);
- host->card->state &= ~MMC_STATE_HIGHSPEED;
+
if (!err) {
mmc_power_off(host);
mmc_card_set_suspended(host->card);
@@ -1198,7 +1189,6 @@ static int mmc_sd_power_restore(struct mmc_host *host)
{
int ret;
- host->card->state &= ~MMC_STATE_HIGHSPEED;
mmc_claim_host(host);
ret = mmc_sd_init_card(host, host->card->ocr, host->card);
mmc_release_host(host);
diff --git a/drivers/mmc/core/sd.h b/drivers/mmc/core/sd.h
index 4b34b24..aab824a 100644
--- a/drivers/mmc/core/sd.h
+++ b/drivers/mmc/core/sd.h
@@ -12,6 +12,5 @@ int mmc_sd_setup_card(struct mmc_host *host, struct mmc_card *card,
bool reinit);
unsigned mmc_sd_get_max_clock(struct mmc_card *card);
int mmc_sd_switch_hs(struct mmc_card *card);
-void mmc_sd_go_highspeed(struct mmc_card *card);
#endif
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index 4d721c6..ef57d2d 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -363,7 +363,7 @@ static unsigned mmc_sdio_get_max_clock(struct mmc_card *card)
{
unsigned max_dtr;
- if (mmc_card_highspeed(card)) {
+ if (mmc_card_hs(card)) {
/*
* The SDIO specification doesn't mention how
* the CIS transfer speed register relates to
@@ -733,7 +733,6 @@ try_again:
mmc_set_clock(host, card->cis.max_dtr);
if (card->cccr.high_speed) {
- mmc_card_set_highspeed(card);
mmc_set_timing(card->host, MMC_TIMING_SD_HS);
}
@@ -792,16 +791,13 @@ try_again:
err = mmc_sdio_init_uhs_card(card);
if (err)
goto remove;
-
- /* Card is an ultra-high-speed card */
- mmc_card_set_uhs(card);
} else {
/*
* Switch to high-speed (if supported).
*/
err = sdio_enable_hs(card);
if (err > 0)
- mmc_sd_go_highspeed(card);
+ mmc_set_timing(card->host, MMC_TIMING_SD_HS);
else if (err)
goto remove;
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index b730272..5473133 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -194,6 +194,7 @@ struct sdio_cis {
};
struct mmc_host;
+struct mmc_ios;
struct sdio_func;
struct sdio_func_tuple;
@@ -250,15 +251,11 @@ struct mmc_card {
unsigned int state; /* (our) card state */
#define MMC_STATE_PRESENT (1<<0) /* present in sysfs */
#define MMC_STATE_READONLY (1<<1) /* card is read-only */
-#define MMC_STATE_HIGHSPEED (1<<2) /* card is in high speed mode */
-#define MMC_STATE_BLOCKADDR (1<<3) /* card uses block-addressing */
-#define MMC_STATE_HIGHSPEED_DDR (1<<4) /* card is in high speed mode */
-#define MMC_STATE_ULTRAHIGHSPEED (1<<5) /* card is in ultra high speed mode */
-#define MMC_CARD_SDXC (1<<6) /* card is SDXC */
-#define MMC_CARD_REMOVED (1<<7) /* card has been removed */
-#define MMC_STATE_HIGHSPEED_200 (1<<8) /* card is in HS200 mode */
-#define MMC_STATE_DOING_BKOPS (1<<10) /* card is doing BKOPS */
-#define MMC_STATE_SUSPENDED (1<<11) /* card is suspended */
+#define MMC_STATE_BLOCKADDR (1<<2) /* card uses block-addressing */
+#define MMC_CARD_SDXC (1<<3) /* card is SDXC */
+#define MMC_CARD_REMOVED (1<<4) /* card has been removed */
+#define MMC_STATE_DOING_BKOPS (1<<5) /* card is doing BKOPS */
+#define MMC_STATE_SUSPENDED (1<<6) /* card is suspended */
unsigned int quirks; /* card quirks */
#define MMC_QUIRK_LENIENT_FN0 (1<<0) /* allow SDIO FN0 writes outside of the VS CCCR range */
#define MMC_QUIRK_BLKSZ_FOR_BYTE_MODE (1<<1) /* use func->cur_blksize */
@@ -418,11 +415,7 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data)
#define mmc_card_present(c) ((c)->state & MMC_STATE_PRESENT)
#define mmc_card_readonly(c) ((c)->state & MMC_STATE_READONLY)
-#define mmc_card_highspeed(c) ((c)->state & MMC_STATE_HIGHSPEED)
-#define mmc_card_hs200(c) ((c)->state & MMC_STATE_HIGHSPEED_200)
#define mmc_card_blockaddr(c) ((c)->state & MMC_STATE_BLOCKADDR)
-#define mmc_card_ddr_mode(c) ((c)->state & MMC_STATE_HIGHSPEED_DDR)
-#define mmc_card_uhs(c) ((c)->state & MMC_STATE_ULTRAHIGHSPEED)
#define mmc_card_ext_capacity(c) ((c)->state & MMC_CARD_SDXC)
#define mmc_card_removed(c) ((c) && ((c)->state & MMC_CARD_REMOVED))
#define mmc_card_doing_bkops(c) ((c)->state & MMC_STATE_DOING_BKOPS)
@@ -430,11 +423,7 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data)
#define mmc_card_set_present(c) ((c)->state |= MMC_STATE_PRESENT)
#define mmc_card_set_readonly(c) ((c)->state |= MMC_STATE_READONLY)
-#define mmc_card_set_highspeed(c) ((c)->state |= MMC_STATE_HIGHSPEED)
-#define mmc_card_set_hs200(c) ((c)->state |= MMC_STATE_HIGHSPEED_200)
#define mmc_card_set_blockaddr(c) ((c)->state |= MMC_STATE_BLOCKADDR)
-#define mmc_card_set_ddr_mode(c) ((c)->state |= MMC_STATE_HIGHSPEED_DDR)
-#define mmc_card_set_uhs(c) ((c)->state |= MMC_STATE_ULTRAHIGHSPEED)
#define mmc_card_set_ext_capacity(c) ((c)->state |= MMC_CARD_SDXC)
#define mmc_card_set_removed(c) ((c)->state |= MMC_CARD_REMOVED)
#define mmc_card_set_doing_bkops(c) ((c)->state |= MMC_STATE_DOING_BKOPS)
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 3535420..2f263ae 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -17,6 +17,7 @@
#include <linux/fault-inject.h>
#include <linux/mmc/core.h>
+#include <linux/mmc/card.h>
#include <linux/mmc/pm.h>
struct mmc_ios {
@@ -476,4 +477,26 @@ static inline unsigned int mmc_host_clk_rate(struct mmc_host *host)
return host->ios.clock;
}
#endif
+
+static inline int mmc_card_hs(struct mmc_card *card)
+{
+ return card->host->ios.timing == MMC_TIMING_SD_HS ||
+ card->host->ios.timing == MMC_TIMING_MMC_HS;
+}
+
+static inline int mmc_card_uhs(struct mmc_card *card)
+{
+ return card->host->ios.timing >= MMC_TIMING_UHS_SDR12 &&
+ card->host->ios.timing <= MMC_TIMING_UHS_DDR50;
+}
+
+static inline bool mmc_card_hs200(struct mmc_card *card)
+{
+ return card->host->ios.timing == MMC_TIMING_MMC_HS200;
+}
+
+static inline bool mmc_card_ddr52(struct mmc_card *card)
+{
+ return card->host->ios.timing == MMC_TIMING_MMC_DDR52;
+}
#endif /* LINUX_MMC_HOST_H */
--
1.7.0.4
next prev parent reply other threads:[~2014-04-18 13:36 UTC|newest]
Thread overview: 181+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-05 12:10 [PATCH 0/3] mmc: tmio: Use modern PM ops Ulf Hansson
2013-11-05 12:10 ` [PATCH 1/3] mmc: sh_mobile_sdhi: Use modern PM macros to define pm callbacks Ulf Hansson
2013-11-05 22:29 ` Guennadi Liakhovetski
2013-11-05 12:10 ` [PATCH 2/3] mmc: tmio_mmc: Convert from legacy to modern PM ops Ulf Hansson
2013-11-05 22:24 ` Guennadi Liakhovetski
2013-11-05 12:10 ` [PATCH 3/3] mmc: tmio: Adapt to proper PM configs for exported functions Ulf Hansson
2013-11-05 22:29 ` Guennadi Liakhovetski
2013-11-05 13:26 ` [PATCH] mmc: trivial: fix the compiling warning Seungwon Jeon
2013-11-06 3:20 ` Jaehoon Chung
2013-11-06 9:42 ` Seungwon Jeon
2013-11-05 13:27 ` [PATCH 0/3] mmc: update bus speed mode Seungwon Jeon
2013-11-05 13:27 ` [PATCH 1/3] mmc: rework selection of " Seungwon Jeon
2013-11-05 14:06 ` Ulf Hansson
2013-11-06 9:09 ` Seungwon Jeon
2013-11-06 10:46 ` Ulf Hansson
2013-11-05 13:27 ` [PATCH 2/3] mmc: correct some exclusive card state to clear Seungwon Jeon
2013-11-05 14:33 ` Ulf Hansson
2013-11-06 9:35 ` Seungwon Jeon
2013-11-06 10:38 ` Ulf Hansson
2013-11-07 3:51 ` Seungwon Jeon
2013-11-05 13:28 ` [PATCH 3/3] mmc: add support for hs400 mode of eMMC5.0 Seungwon Jeon
2013-11-07 7:38 ` Shen, Jackey
2013-11-07 11:38 ` Seungwon Jeon
2013-11-08 9:05 ` Jackey Shen
2013-11-11 12:51 ` Seungwon Jeon
2013-11-25 7:32 ` Jackey Shen
2013-11-08 12:16 ` [PATCH 0/3] mmc: tmio: Use modern PM ops Guennadi Liakhovetski
2013-11-11 9:24 ` Ulf Hansson
2014-01-15 14:10 ` [PATCH 0/7] mmc: distinguish DDR timing mode for eMMC/UHS Seungwon Jeon
2014-01-15 14:10 ` [PATCH 1/7] mmc: clarify DDR timing mode between SD-UHS and eMMC Seungwon Jeon
2014-01-16 10:50 ` Ulf Hansson
2014-01-17 21:22 ` Ulf Hansson
2014-01-20 3:55 ` Seungwon Jeon
2014-01-23 9:06 ` Ulf Hansson
2014-01-15 14:11 ` [PATCH 2/7] mmc: mmci: " Seungwon Jeon
2014-01-16 10:20 ` Ulf Hansson
2014-01-17 14:05 ` Seungwon Jeon
2014-01-17 14:50 ` [PATCH v2 " Seungwon Jeon
2014-01-15 14:11 ` [PATCH 3/7] mmc: omap: " Seungwon Jeon
2014-01-16 10:49 ` Ulf Hansson
2014-01-16 11:07 ` Balaji T K
2014-01-16 11:01 ` Balaji T K
2014-01-15 14:12 ` [PATCH 4/7] mmc: sh_mmcif: " Seungwon Jeon
2014-01-16 10:22 ` Ulf Hansson
2014-01-17 14:36 ` Seungwon Jeon
2014-01-28 13:08 ` Seungwon Jeon
2014-01-15 14:12 ` [PATCH 5/7] mmc: rtsx: " Seungwon Jeon
2014-01-16 10:51 ` Ulf Hansson
2014-01-15 14:12 ` [PATCH 6/7] mmc: dw_mmc: " Seungwon Jeon
2014-01-16 10:37 ` Ulf Hansson
2014-01-15 14:12 ` [PATCH 7/7] mmc: sdhci: " Seungwon Jeon
2014-01-16 10:25 ` Ulf Hansson
2014-01-15 14:13 ` [PATCH 0/5] update selection of bus speed mode for eMMC Seungwon Jeon
2014-01-15 14:14 ` [PATCH 1/5] mmc: drop the speed mode of card's state Seungwon Jeon
2014-01-15 14:14 ` [PATCH 2/5] mmc: identify available device type to select Seungwon Jeon
2014-01-15 14:14 ` [PATCH 3/5] mmc: step power class after final selection of bus mode Seungwon Jeon
2014-01-15 14:15 ` [PATCH 4/5] mmc: rework selection of bus speed mode Seungwon Jeon
2014-01-15 14:19 ` [PATCH 5/5] mmc: add support for HS400 mode of eMMC5.0 Seungwon Jeon
2014-02-18 10:24 ` Jackey Shen
2014-02-18 13:31 ` Seungwon Jeon
2014-02-15 14:08 ` [PATCH v2 0/7] mmc: distinguish DDR timing mode for eMMC/UHS Seungwon Jeon
2014-03-07 13:30 ` [PATCH v3 " Seungwon Jeon
2014-03-14 12:11 ` [PATCH RESEND " Seungwon Jeon
2014-04-02 11:50 ` Ulf Hansson
2014-04-03 11:56 ` Seungwon Jeon
2014-02-15 14:08 ` [PATCH v2 1/7] mmc: clarify DDR timing mode between SD-UHS and eMMC Seungwon Jeon
2014-03-07 13:30 ` [PATCH v3 " Seungwon Jeon
2014-03-07 13:42 ` Jaehoon Chung
2014-03-14 12:11 ` [PATCH RESEND " Seungwon Jeon
2014-02-15 14:08 ` [PATCH v2 2/7] mmc: mmci: " Seungwon Jeon
2014-02-17 14:08 ` Ulf Hansson
2014-02-18 13:34 ` Seungwon Jeon
2014-03-07 13:30 ` [PATCH v3 " Seungwon Jeon
2014-03-14 12:12 ` [PATCH RESEND " Seungwon Jeon
2014-02-15 14:09 ` [PATCH v2 3/7] mmc: omap: " Seungwon Jeon
2014-03-07 13:30 ` [PATCH v3 " Seungwon Jeon
2014-03-14 12:12 ` [PATCH RESEND " Seungwon Jeon
2014-02-15 14:09 ` [PATCH v2 4/7] mmc: sh_mmcif: " Seungwon Jeon
2014-03-07 13:30 ` [PATCH v3 " Seungwon Jeon
2014-03-14 12:12 ` [PATCH RESEND " Seungwon Jeon
2014-02-15 14:09 ` [PATCH v2 5/7] mmc: rtsx: " Seungwon Jeon
2014-03-07 13:31 ` [PATCH v3 " Seungwon Jeon
2014-03-14 12:12 ` [PATCH RESEND " Seungwon Jeon
2014-02-15 14:09 ` [PATCH v2 6/7] mmc: dw_mmc: " Seungwon Jeon
2014-03-07 13:31 ` [PATCH v3 " Seungwon Jeon
2014-03-07 13:43 ` Jaehoon Chung
2014-03-14 12:12 ` [PATCH RESEMD " Seungwon Jeon
2014-02-15 14:09 ` [PATCH v2 7/7] mmc: sdhci: " Seungwon Jeon
2014-03-07 13:31 ` [PATCH v3 " Seungwon Jeon
2014-03-14 12:12 ` [PATCH RESEND " Seungwon Jeon
2014-02-15 14:18 ` [PATCH RESEND 0/5] update selection of bus speed mode for eMMC Seungwon Jeon
2014-03-07 14:35 ` [PATCH v2 " Seungwon Jeon
2014-03-13 14:41 ` Ulf Hansson
2014-03-13 9:52 ` [PATCH RESEND " Jaehoon Chung
2014-03-14 12:16 ` [PATCH v3 " Seungwon Jeon
2014-03-17 8:47 ` Ulf Hansson
2014-03-18 1:43 ` Seungwon Jeon
2014-03-18 4:20 ` Jaehoon Chung
2014-03-18 8:01 ` Ulf Hansson
2014-03-26 10:59 ` [PATCH v4 " Seungwon Jeon
2014-03-26 11:00 ` [PATCH v4 1/5] mmc: drop the speed mode of card's state Seungwon Jeon
2014-03-26 11:00 ` [PATCH v4 2/5] mmc: identify available device type to select Seungwon Jeon
2014-03-26 11:00 ` [PATCH v4 3/5] mmc: step power class after final selection of bus mode Seungwon Jeon
2014-03-28 8:43 ` Ulf Hansson
2014-03-26 11:00 ` [PATCH v4 4/5] mmc: rework selection of bus speed mode Seungwon Jeon
2014-03-26 11:00 ` [PATCH v4 5/5] mmc: add support for HS400 mode of eMMC5.0 Seungwon Jeon
2014-04-11 11:33 ` [PATCH v5 0/5] update selection of bus speed mode for eMMC Seungwon Jeon
2014-04-11 11:34 ` [PATCH v5 1/5] mmc: drop the speed mode of card's state Seungwon Jeon
2014-04-11 11:34 ` [PATCH v5 2/5] mmc: identify available device type to select Seungwon Jeon
2014-04-11 11:47 ` Ulf Hansson
2014-04-11 11:34 ` [PATCH v5 3/5] mmc: step power class after final selection of bus mode Seungwon Jeon
2014-04-11 11:34 ` [PATCH v5 4/5] mmc: rework selection of bus speed mode Seungwon Jeon
2014-04-11 11:34 ` [PATCH v5 5/5] mmc: add support for HS400 mode of eMMC5.0 Seungwon Jeon
2014-04-11 12:06 ` Ulf Hansson
2014-04-18 13:36 ` [PATCH v6 0/6] update selection of bus speed mode for eMMC Seungwon Jeon
2014-04-20 7:18 ` Ulf Hansson
2014-04-21 3:55 ` Seungwon Jeon
2014-04-18 13:36 ` Seungwon Jeon [this message]
2014-04-18 13:36 ` [PATCH v6 2/6] mmc: identify available device type to select Seungwon Jeon
2014-04-18 13:36 ` [PATCH v6 3/6] mmc: step power class after final selection of bus mode Seungwon Jeon
2014-04-18 13:36 ` [PATCH v6 4/6] mmc: rework selection of bus speed mode Seungwon Jeon
2014-04-18 13:37 ` [PATCH v6 5/6] mmc: add support for HS400 mode of eMMC5.0 Seungwon Jeon
2014-04-18 13:37 ` [PATCH v6 6/6] mmc: core: add DT bindings for eMMC HS400 1.8/1.2V Seungwon Jeon
2014-04-23 8:30 ` Ulf Hansson
2014-04-23 8:07 ` [PATCH 0/6] update selection of bus speed mode for eMMC Seungwon Jeon
2014-04-23 8:07 ` [PATCH 1/6] mmc: drop the speed mode of card's state Seungwon Jeon
2014-05-05 8:02 ` Ulf Hansson
2014-04-23 8:07 ` [PATCH 2/6] mmc: identify available device type to select Seungwon Jeon
2014-04-23 8:08 ` [PATCH 3/6] mmc: step power class after final selection of bus mode Seungwon Jeon
2014-04-23 8:08 ` [PATCH 4/6] mmc: rework selection of bus speed mode Seungwon Jeon
2014-04-23 8:14 ` [PATCH 5/6] mmc: add support for HS400 mode of eMMC5.0 Seungwon Jeon
2014-04-23 8:15 ` [PATCH 6/6] mmc: core: add DT bindings for eMMC HS400 1.8/1.2V Seungwon Jeon
2014-02-15 14:18 ` [PATCH RESEND 1/5] mmc: drop the speed mode of card's state Seungwon Jeon
2014-02-17 14:38 ` Ulf Hansson
2014-02-18 13:43 ` Seungwon Jeon
2014-02-18 16:40 ` Ulf Hansson
2014-03-07 14:36 ` [PATCH v2 " Seungwon Jeon
2014-03-14 12:16 ` [PATCH v3 " Seungwon Jeon
2014-02-15 14:18 ` [PATCH RESEND 2/5] mmc: identify available device type to select Seungwon Jeon
2014-03-07 14:36 ` [PATCH v2 " Seungwon Jeon
2014-03-10 10:14 ` Jaehoon Chung
2014-03-10 11:59 ` Seungwon Jeon
2014-03-13 5:37 ` Jaehoon Chung
2014-03-13 8:37 ` Seungwon Jeon
2014-03-13 9:51 ` Jaehoon Chung
2014-03-13 14:02 ` Ulf Hansson
2014-03-14 2:49 ` Seungwon Jeon
2014-03-14 7:34 ` Ulf Hansson
2014-03-14 10:24 ` Seungwon Jeon
2014-03-28 8:31 ` Ulf Hansson
2014-03-28 12:27 ` Seungwon Jeon
2014-03-14 12:16 ` [PATCH v3 " Seungwon Jeon
2014-02-15 14:23 ` [PATCH RESEND 3/5] mmc: step power class after final selection of bus mode Seungwon Jeon
2014-03-07 14:36 ` [PATCH v2 " Seungwon Jeon
2014-03-13 14:28 ` Ulf Hansson
2014-03-14 2:49 ` Seungwon Jeon
2014-03-14 7:31 ` Ulf Hansson
2014-03-14 12:16 ` [PATCH v3 " Seungwon Jeon
2014-02-15 14:24 ` [PATCH RESEND 4/5] mmc: rework selection of bus speed mode Seungwon Jeon
2014-03-07 14:36 ` [PATCH v2 " Seungwon Jeon
2014-03-14 12:16 ` [PATCH v3 " Seungwon Jeon
2014-03-21 13:01 ` Ulf Hansson
2014-03-22 12:04 ` Seungwon Jeon
2014-03-24 13:11 ` Ulf Hansson
2014-02-15 14:24 ` [PATCH RESEND 5/5] mmc: add support for HS400 mode of eMMC5.0 Seungwon Jeon
2014-03-07 14:36 ` [PATCH v2 " Seungwon Jeon
2014-03-11 0:45 ` Jackey Shen
2014-03-14 11:34 ` Seungwon Jeon
2014-03-14 12:16 ` [PATCH v3 " Seungwon Jeon
2014-03-24 15:41 ` Ulf Hansson
2014-03-25 9:23 ` Seungwon Jeon
2014-03-28 9:57 ` Ulf Hansson
2014-03-28 12:18 ` Seungwon Jeon
2014-03-28 13:33 ` Ulf Hansson
2014-04-02 1:15 ` Seungwon Jeon
2014-04-02 9:39 ` Ulf Hansson
2014-04-03 11:53 ` Seungwon Jeon
2014-04-03 13:14 ` Ulf Hansson
2014-04-04 10:46 ` Seungwon Jeon
2014-04-04 11:58 ` Ulf Hansson
2014-04-05 14:36 ` Seungwon Jeon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='001401cf5b0b$3528ade0$9f7a09a0$%jun@samsung.com' \
--to=tgih.jun@samsung.com \
--cc=alim.akhtar@samsung.com \
--cc=chris@printf.net \
--cc=jackey.shen@amd.com \
--cc=jh80.chung@samsung.com \
--cc=linux-mmc@vger.kernel.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).