RE: [PATCH v3 4/8] mmc: dw_mmc: remove unused member variable.

[Seungwon Jeon <tgih.jun@samsung.com>]

On Monday, February 03, 2014, Jaehoon Chung wrote:
> Since using the device-tree, didn't use the callback pointer.
> So removed the unused callback pointer.
> 
> 
Above unnecessary line?

Looks good to me.
But just one thing is...
We may need to consider alternative for setpower soon.

Thanks,
Seungwon Jeon

> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
> ---
> Changelog V3:
> 	- None
> Changelog V2:
> 	- None
> 
>  drivers/mmc/host/dw_mmc.c  |   33 +++------------------------------
>  include/linux/mmc/dw_mmc.h |   14 --------------
>  2 files changed, 3 insertions(+), 44 deletions(-)
> 
> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> index e7357b8..551dade 100644
> --- a/drivers/mmc/host/dw_mmc.c
> +++ b/drivers/mmc/host/dw_mmc.c
> @@ -850,8 +850,6 @@ static void __dw_mci_start_request(struct dw_mci *host,
>  	u32 cmdflags;
> 
>  	mrq = slot->mrq;
> -	if (host->pdata->select_slot)
> -		host->pdata->select_slot(slot->id);
> 
>  	host->cur_slot = slot;
>  	host->mrq = mrq;
> @@ -985,17 +983,11 @@ static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
>  	switch (ios->power_mode) {
>  	case MMC_POWER_UP:
>  		set_bit(DW_MMC_CARD_NEED_INIT, &slot->flags);
> -		/* Power up slot */
> -		if (slot->host->pdata->setpower)
> -			slot->host->pdata->setpower(slot->id, mmc->ocr_avail);
>  		regs = mci_readl(slot->host, PWREN);
>  		regs |= (1 << slot->id);
>  		mci_writel(slot->host, PWREN, regs);
>  		break;
>  	case MMC_POWER_OFF:
> -		/* Power down slot */
> -		if (slot->host->pdata->setpower)
> -			slot->host->pdata->setpower(slot->id, 0);
>  		regs = mci_readl(slot->host, PWREN);
>  		regs &= ~(1 << slot->id);
>  		mci_writel(slot->host, PWREN, regs);
> @@ -1009,13 +1001,10 @@ static int dw_mci_get_ro(struct mmc_host *mmc)
>  {
>  	int read_only;
>  	struct dw_mci_slot *slot = mmc_priv(mmc);
> -	struct dw_mci_board *brd = slot->host->pdata;
> 
>  	/* Use platform get_ro function, else try on board write protect */
>  	if (slot->quirks & DW_MCI_SLOT_QUIRK_NO_WRITE_PROTECT)
>  		read_only = 0;
> -	else if (brd->get_ro)
> -		read_only = brd->get_ro(slot->id);
>  	else if (gpio_is_valid(slot->wp_gpio))
>  		read_only = gpio_get_value(slot->wp_gpio);
>  	else
> @@ -1039,8 +1028,6 @@ static int dw_mci_get_cd(struct mmc_host *mmc)
>  	/* Use platform get_cd function, else try onboard card detect */
>  	if (brd->quirks & DW_MCI_QUIRK_BROKEN_CARD_DETECTION)
>  		present = 1;
> -	else if (brd->get_cd)
> -		present = !brd->get_cd(slot->id);
>  	else if (!IS_ERR_VALUE(gpio_cd))
>  		present = gpio_cd;
>  	else
> @@ -2138,17 +2125,7 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
>  		mmc->f_max = freq[1];
>  	}
> 
> -	if (host->pdata->get_ocr)
> -		mmc->ocr_avail = host->pdata->get_ocr(id);
> -	else
> -		mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
> -
> -	/*
> -	 * Start with slot power disabled, it will be enabled when a card
> -	 * is detected.
> -	 */
> -	if (host->pdata->setpower)
> -		host->pdata->setpower(id, 0);
> +	mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
> 
>  	if (host->pdata->caps)
>  		mmc->caps = host->pdata->caps;
> @@ -2217,10 +2194,6 @@ err_setup_bus:
> 
>  static void dw_mci_cleanup_slot(struct dw_mci_slot *slot, unsigned int id)
>  {
> -	/* Shutdown detect IRQ */
> -	if (slot->host->pdata->exit)
> -		slot->host->pdata->exit(id);
> -
>  	/* Debugfs stuff is cleaned up by mmc core */
>  	mmc_remove_host(slot->mmc);
>  	slot->host->slot[id] = NULL;
> @@ -2395,9 +2368,9 @@ int dw_mci_probe(struct dw_mci *host)
>  		}
>  	}
> 
> -	if (!host->pdata->select_slot && host->pdata->num_slots > 1) {
> +	if (host->pdata->num_slots > 1) {
>  		dev_err(host->dev,
> -			"Platform data must supply select_slot function\n");
> +			"Platform data must supply num_slots.\n");
>  		return -ENODEV;
>  	}
> 
> diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h
> index 6ce7d2c..babaea9 100644
> --- a/include/linux/mmc/dw_mmc.h
> +++ b/include/linux/mmc/dw_mmc.h
> @@ -248,20 +248,6 @@ struct dw_mci_board {
>  	/* delay in mS before detecting cards after interrupt */
>  	u32 detect_delay_ms;
> 
> -	int (*init)(u32 slot_id, irq_handler_t , void *);
> -	int (*get_ro)(u32 slot_id);
> -	int (*get_cd)(u32 slot_id);
> -	int (*get_ocr)(u32 slot_id);
> -	int (*get_bus_wd)(u32 slot_id);
> -	/*
> -	 * Enable power to selected slot and set voltage to desired level.
> -	 * Voltage levels are specified using MMC_VDD_xxx defines defined
> -	 * in linux/mmc/host.h file.
> -	 */
> -	void (*setpower)(u32 slot_id, u32 volt);
> -	void (*exit)(u32 slot_id);
> -	void (*select_slot)(u32 slot_id);
> -
>  	struct dw_mci_dma_ops *dma_ops;
>  	struct dma_pdata *data;
>  	struct block_settings *blk_settings;
> --
> 1.7.9.5
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html