[PATCH v2 1/4] mmc: dw_mmc: fix the transmission handling in IDMAC

Seungwon Jeon
2012-05-22T04:00:56Z

DTO interrupt can be later than transmit interrupt(IDMAC)
in case of write. Current handling of idmac interrupt sets
EVENT_DATA_COMPLETE as well as EVENT_XFER_COMPLETE regardless
DTO rising. This makes the current request be finished in tasklet
and permits the next request even though current data transfer
is still in progress. As a result, sequence is broken and lock-up
happens. Setting EVENT_DATA_COMPLETE is not proper after IDMAC
interrupt. It should be taken after DTO interrupt is generated.

Reported-by: Dmitry Shmidt <dimitrysh@android.com>
Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
---
drivers/mmc/host/dw_mmc.c | 1 -
1 files changed, 0 insertions(+), 1 deletions(-)

diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 9bbf45f..b46faf0 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -1623,7 +1623,6 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
mci_writel(host, IDSTS, SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI);
mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI);
- set_bit(EVENT_DATA_COMPLETE, &host->pending_events);
host->dma_ops->complete(host);
}
#endif
--
1.7.0.4