Linux MultiMedia Card development
 help / color / mirror / Atom feed
From: Adrian Hunter <adrian.hunter@intel.com>
To: Victor Shih <victorshihgli@gmail.com>, ulf.hansson@linaro.org
Cc: linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org,
	benchuanggli@gmail.com, Lucas.Lai@genesyslogic.com.tw,
	HL.Liu@genesyslogic.com.tw, Greg.tu@genesyslogic.com.tw,
	dlunev@chromium.org, Ben Chuang <ben.chuang@genesyslogic.com.tw>,
	AKASHI Takahiro <takahiro.akashi@linaro.org>,
	Victor Shih <victor.shih@genesyslogic.com.tw>
Subject: Re: [PATCH V21 14/22] mmc: sdhci-uhs2: add set_ios()
Date: Mon, 9 Sep 2024 11:07:51 +0300	[thread overview]
Message-ID: <12073898-a98b-46dd-ad68-5d58340a7952@intel.com> (raw)
In-Reply-To: <20240906102049.7059-15-victorshihgli@gmail.com>

On 6/09/24 13:20, Victor Shih wrote:
> From: Victor Shih <victor.shih@genesyslogic.com.tw>
> 
> This is a sdhci version of mmc's set_ios operation.
> THis is used to handle basic IO bus setting.
> It covers both UHS-I and UHS-II.
> 
> Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
> Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>

Doesn't seem to compile:

drivers/mmc/host/sdhci-uhs2.c:275:12: error: ‘sdhci_uhs2_set_ios’ defined but not used [-Werror=unused-function]
  275 | static int sdhci_uhs2_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
      |            ^~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make[5]: *** [scripts/Makefile.build:244: drivers/mmc/host/sdhci-uhs2.o] Error 1
make[4]: *** [scripts/Makefile.build:485: drivers/mmc/host] Error 2
make[3]: *** [scripts/Makefile.build:485: drivers/mmc] Error 2
make[2]: *** [scripts/Makefile.build:485: drivers] Error 2
make[1]: *** [/home/ahunter/git/review/Makefile:1925: .] Error 2
make: *** [Makefile:224: __sub-make] Error 2


Please check all patches compile.


> ---
> 
> Updates in V14:
>  - Use mmc_card_uhs2() to stead sdhci_uhs2_mode() in the
>    sdhci_uhs2_set_ios().
> 
> Updates in V13:
>  - Add judgment condition for power mode in the __sdhci_uhs2_set_ios().
>  - Modify comment message.
> 
> Updates in V9:
>  - Simplity the turning_on_clk in sdhci_set_ios().
> 
> Updates in V8:
>  - Add the judgment formula for MMC_TIMING_SPEED_A_HD, MMC_TIMING_SPEED_B
>    and MMC_TIMING_SPEED_B_HD in __sdhci_uhs2_set_ios().
>  - Add the switch case for MMC_TIMING_SPEED_A_HD, MMC_TIMING_SPEED_B
>    and MMC_TIMING_SPEED_B_HD in sdhci_get_preset_value().
>  - mmc_opt_regulator_set_ocr() to instead of mmc_regulator_set_ocr()
>    in sdhci_uhs2_set_ios().
> 
> Updates in V7:
>  - Remove unnecessary functions.
> 
> Updates in V6:
>  - Modify return value in some functions.
>  - Remove unnecessary functions.
> 
> ---
> 
>  drivers/mmc/host/sdhci-uhs2.c | 95 +++++++++++++++++++++++++++++++++++
>  drivers/mmc/host/sdhci-uhs2.h |  1 +
>  drivers/mmc/host/sdhci.c      | 55 ++++++++++++--------
>  drivers/mmc/host/sdhci.h      |  2 +
>  4 files changed, 132 insertions(+), 21 deletions(-)
> 
> diff --git a/drivers/mmc/host/sdhci-uhs2.c b/drivers/mmc/host/sdhci-uhs2.c
> index 8bd2baa79d76..abb56ab8f916 100644
> --- a/drivers/mmc/host/sdhci-uhs2.c
> +++ b/drivers/mmc/host/sdhci-uhs2.c
> @@ -207,6 +207,101 @@ void sdhci_uhs2_set_timeout(struct sdhci_host *host, struct mmc_command *cmd)
>  }
>  EXPORT_SYMBOL_GPL(sdhci_uhs2_set_timeout);
>  
> +/**
> + * sdhci_uhs2_clear_set_irqs - set Error Interrupt Status Enable register
> + * @host:	SDHCI host
> + * @clear:	bit-wise clear mask
> + * @set:	bit-wise set mask
> + *
> + * Set/unset bits in UHS-II Error Interrupt Status Enable register
> + */
> +void sdhci_uhs2_clear_set_irqs(struct sdhci_host *host, u32 clear, u32 set)
> +{
> +	u32 ier;
> +
> +	ier = sdhci_readl(host, SDHCI_UHS2_INT_STATUS_ENABLE);
> +	ier &= ~clear;
> +	ier |= set;
> +	sdhci_writel(host, ier, SDHCI_UHS2_INT_STATUS_ENABLE);
> +	sdhci_writel(host, ier, SDHCI_UHS2_INT_SIGNAL_ENABLE);
> +}
> +EXPORT_SYMBOL_GPL(sdhci_uhs2_clear_set_irqs);
> +
> +static void __sdhci_uhs2_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> +{
> +	struct sdhci_host *host = mmc_priv(mmc);
> +	u8 cmd_res, dead_lock;
> +	u16 ctrl_2;
> +
> +	/* UHS2 Timeout Control */
> +	sdhci_calc_timeout_uhs2(host, &cmd_res, &dead_lock);
> +
> +	/* change to use calculate value */
> +	cmd_res |= FIELD_PREP(SDHCI_UHS2_TIMER_CTRL_DEADLOCK_MASK, dead_lock);
> +
> +	sdhci_uhs2_clear_set_irqs(host,
> +				  SDHCI_UHS2_INT_CMD_TIMEOUT |
> +				  SDHCI_UHS2_INT_DEADLOCK_TIMEOUT,
> +				  0);
> +	sdhci_writeb(host, cmd_res, SDHCI_UHS2_TIMER_CTRL);
> +	sdhci_uhs2_clear_set_irqs(host, 0,
> +				  SDHCI_UHS2_INT_CMD_TIMEOUT |
> +				  SDHCI_UHS2_INT_DEADLOCK_TIMEOUT);
> +
> +	/* UHS2 timing. Note, UHS2 timing is disabled when powering off */
> +	ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
> +	if (ios->power_mode != MMC_POWER_OFF &&
> +	    (ios->timing == MMC_TIMING_UHS2_SPEED_A ||
> +	     ios->timing == MMC_TIMING_UHS2_SPEED_A_HD ||
> +	     ios->timing == MMC_TIMING_UHS2_SPEED_B ||
> +	     ios->timing == MMC_TIMING_UHS2_SPEED_B_HD))
> +		ctrl_2 |= SDHCI_CTRL_UHS2 | SDHCI_CTRL_UHS2_ENABLE;
> +	else
> +		ctrl_2 &= ~(SDHCI_CTRL_UHS2 | SDHCI_CTRL_UHS2_ENABLE);
> +	sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
> +	host->timing = ios->timing;
> +
> +	if (!(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN))
> +		sdhci_enable_preset_value(host, true);
> +
> +	if (host->ops->set_power)
> +		host->ops->set_power(host, ios->power_mode, ios->vdd);
> +	else
> +		sdhci_uhs2_set_power(host, ios->power_mode, ios->vdd);
> +
> +	sdhci_set_clock(host, host->clock);
> +}
> +
> +static int sdhci_uhs2_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> +{
> +	struct sdhci_host *host = mmc_priv(mmc);
> +
> +	pr_debug("%s: clock %uHz powermode %u Vdd %u timing %u\n",
> +		 mmc_hostname(mmc), ios->clock, ios->power_mode, ios->vdd, ios->timing);
> +
> +	if (!mmc_card_uhs2(mmc)) {
> +		sdhci_set_ios(mmc, ios);
> +		return 0;
> +	}
> +
> +	if (ios->power_mode == MMC_POWER_UNDEFINED)
> +		return 0;
> +
> +	if (host->flags & SDHCI_DEVICE_DEAD) {
> +		if (ios->power_mode == MMC_POWER_OFF) {
> +			mmc_opt_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
> +			mmc_regulator_set_vqmmc2(mmc, ios);
> +		}
> +		return -1;
> +	}
> +
> +	sdhci_set_ios_common(mmc, ios);
> +
> +	__sdhci_uhs2_set_ios(mmc, ios);
> +
> +	return 0;
> +}
> +
>  /*****************************************************************************\
>   *                                                                           *
>   * Driver init/exit                                                          *
> diff --git a/drivers/mmc/host/sdhci-uhs2.h b/drivers/mmc/host/sdhci-uhs2.h
> index 9bd3f610cf8c..f6649a518842 100644
> --- a/drivers/mmc/host/sdhci-uhs2.h
> +++ b/drivers/mmc/host/sdhci-uhs2.h
> @@ -181,5 +181,6 @@ void sdhci_uhs2_dump_regs(struct sdhci_host *host);
>  void sdhci_uhs2_reset(struct sdhci_host *host, u16 mask);
>  void sdhci_uhs2_set_power(struct sdhci_host *host, unsigned char mode, unsigned short vdd);
>  void sdhci_uhs2_set_timeout(struct sdhci_host *host, struct mmc_command *cmd);
> +void sdhci_uhs2_clear_set_irqs(struct sdhci_host *host, u32 clear, u32 set);
>  
>  #endif /* __SDHCI_UHS2_H */
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index 366c3d30dba6..63fa1714930a 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -47,8 +47,6 @@
>  static unsigned int debug_quirks = 0;
>  static unsigned int debug_quirks2;
>  
> -static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable);
> -
>  static bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd);
>  
>  void sdhci_dumpregs(struct sdhci_host *host)
> @@ -1877,6 +1875,12 @@ static u16 sdhci_get_preset_value(struct sdhci_host *host)
>  	case MMC_TIMING_MMC_HS400:
>  		preset = sdhci_readw(host, SDHCI_PRESET_FOR_HS400);
>  		break;
> +	case MMC_TIMING_UHS2_SPEED_A:
> +	case MMC_TIMING_UHS2_SPEED_A_HD:
> +	case MMC_TIMING_UHS2_SPEED_B:
> +	case MMC_TIMING_UHS2_SPEED_B_HD:
> +		preset = sdhci_readw(host, SDHCI_PRESET_FOR_UHS2);
> +		break;
>  	default:
>  		pr_warn("%s: Invalid UHS-I mode selected\n",
>  			mmc_hostname(host->mmc));
> @@ -2323,24 +2327,9 @@ static bool sdhci_presetable_values_change(struct sdhci_host *host, struct mmc_i
>  	       (sdhci_preset_needed(host, ios->timing) || host->drv_type != ios->drv_type);
>  }
>  
> -void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> +void sdhci_set_ios_common(struct mmc_host *mmc, struct mmc_ios *ios)
>  {
>  	struct sdhci_host *host = mmc_priv(mmc);
> -	bool reinit_uhs = host->reinit_uhs;
> -	bool turning_on_clk = false;
> -	u8 ctrl;
> -
> -	host->reinit_uhs = false;
> -
> -	if (ios->power_mode == MMC_POWER_UNDEFINED)
> -		return;
> -
> -	if (host->flags & SDHCI_DEVICE_DEAD) {
> -		if (!IS_ERR(mmc->supply.vmmc) &&
> -		    ios->power_mode == MMC_POWER_OFF)
> -			mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
> -		return;
> -	}
>  
>  	/*
>  	 * Reset the chip on each power off.
> @@ -2357,8 +2346,6 @@ void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
>  		sdhci_enable_preset_value(host, false);
>  
>  	if (!ios->clock || ios->clock != host->clock) {
> -		turning_on_clk = ios->clock && !host->clock;
> -
>  		host->ops->set_clock(host, ios->clock);
>  		host->clock = ios->clock;
>  
> @@ -2374,6 +2361,31 @@ void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
>  			mmc->max_busy_timeout /= host->timeout_clk;
>  		}
>  	}
> +}
> +EXPORT_SYMBOL_GPL(sdhci_set_ios_common);
> +
> +void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> +{
> +	struct sdhci_host *host = mmc_priv(mmc);
> +	bool reinit_uhs = host->reinit_uhs;
> +	bool turning_on_clk;
> +	u8 ctrl;
> +
> +	host->reinit_uhs = false;
> +
> +	if (ios->power_mode == MMC_POWER_UNDEFINED)
> +		return;
> +
> +	if (host->flags & SDHCI_DEVICE_DEAD) {
> +		if (!IS_ERR(mmc->supply.vmmc) &&
> +		    ios->power_mode == MMC_POWER_OFF)
> +			mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
> +		return;
> +	}
> +
> +	turning_on_clk = ios->clock != host->clock && ios->clock && !host->clock;
> +
> +	sdhci_set_ios_common(mmc, ios);
>  
>  	if (host->ops->set_power)
>  		host->ops->set_power(host, ios->power_mode, ios->vdd);
> @@ -2942,7 +2954,7 @@ int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
>  }
>  EXPORT_SYMBOL_GPL(sdhci_execute_tuning);
>  
> -static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable)
> +void sdhci_enable_preset_value(struct sdhci_host *host, bool enable)
>  {
>  	/* Host Controller v3.00 defines preset value registers */
>  	if (host->version < SDHCI_SPEC_300)
> @@ -2970,6 +2982,7 @@ static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable)
>  		host->preset_enabled = enable;
>  	}
>  }
> +EXPORT_SYMBOL_GPL(sdhci_enable_preset_value);
>  
>  static void sdhci_post_req(struct mmc_host *mmc, struct mmc_request *mrq,
>  				int err)
> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> index 0f78708d0c70..5c66927210bd 100644
> --- a/drivers/mmc/host/sdhci.h
> +++ b/drivers/mmc/host/sdhci.h
> @@ -848,6 +848,8 @@ void sdhci_reset(struct sdhci_host *host, u8 mask);
>  void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing);
>  int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode);
>  int __sdhci_execute_tuning(struct sdhci_host *host, u32 opcode);
> +void sdhci_enable_preset_value(struct sdhci_host *host, bool enable);
> +void sdhci_set_ios_common(struct mmc_host *mmc, struct mmc_ios *ios);
>  void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios);
>  int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
>  				      struct mmc_ios *ios);


  reply	other threads:[~2024-09-09  8:08 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-09-06 10:20 [PATCH V21 00/22] Add support UHS-II for GL9755 and GL9767 Victor Shih
2024-09-06 10:20 ` [PATCH V21 01/22] mmc: core: Cleanup printing of speed mode at card insertion Victor Shih
2024-09-06 10:20 ` [PATCH V21 02/22] mmc: core: Prepare to support SD UHS-II cards Victor Shih
2024-09-06 10:20 ` [PATCH V21 03/22] mmc: core: Announce successful insertion of an SD UHS-II card Victor Shih
2024-09-06 10:20 ` [PATCH V21 04/22] mmc: core: Extend support for mmc regulators with a vqmmc2 Victor Shih
2024-09-06 10:20 ` [PATCH V21 05/22] mmc: core: Add definitions for SD UHS-II cards Victor Shih
2024-09-06 10:20 ` [PATCH V21 06/22] mmc: core: Add New function to re-factoring the code Victor Shih
2024-09-06 10:20 ` [PATCH V21 07/22] mmc: core: Support UHS-II card control and access Victor Shih
2024-09-06 10:20 ` [PATCH V21 08/22] mmc: sdhci: add UHS-II related definitions in headers Victor Shih
2024-09-06 10:20 ` [PATCH V21 09/22] mmc: sdhci: add UHS-II module and add a kernel configuration Victor Shih
2024-09-09  8:06   ` Adrian Hunter
2024-09-13 10:18     ` Victor Shih
2024-09-06 10:20 ` [PATCH V21 10/22] mmc: sdhci-uhs2: dump UHS-II registers Victor Shih
2024-09-06 10:20 ` [PATCH V21 11/22] mmc: sdhci-uhs2: add reset function Victor Shih
2024-09-06 10:20 ` [PATCH V21 12/22] mmc: sdhci-uhs2: add set_power() to support vdd2 Victor Shih
2024-09-06 10:20 ` [PATCH V21 13/22] mmc: sdhci-uhs2: add set_timeout() Victor Shih
2024-09-06 10:20 ` [PATCH V21 14/22] mmc: sdhci-uhs2: add set_ios() Victor Shih
2024-09-09  8:07   ` Adrian Hunter [this message]
2024-09-13 10:18     ` Victor Shih
2024-09-06 10:20 ` [PATCH V21 15/22] mmc: sdhci-uhs2: add uhs2_control() to initialise the interface Victor Shih
2024-09-06 10:20 ` [PATCH V21 16/22] mmc: sdhci-uhs2: add request() and others Victor Shih
2024-09-06 10:20 ` [PATCH V21 17/22] mmc: sdhci-uhs2: add irq() " Victor Shih
2024-09-06 10:20 ` [PATCH V21 18/22] mmc: sdhci-uhs2: add add_host() and others to set up the driver Victor Shih
2024-09-06 10:20 ` [PATCH V21 19/22] mmc: sdhci-uhs2: add pre-detect_init hook Victor Shih
2024-09-06 10:20 ` [PATCH V21 20/22] mmc: sdhci-pci: add UHS-II support framework Victor Shih
2024-09-06 10:20 ` [PATCH V21 21/22] mmc: sdhci-pci-gli: enable UHS-II mode for GL9755 Victor Shih
2024-09-06 10:20 ` [PATCH V21 22/22] mmc: sdhci-pci-gli: enable UHS-II mode for GL9767 Victor Shih

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=12073898-a98b-46dd-ad68-5d58340a7952@intel.com \
    --to=adrian.hunter@intel.com \
    --cc=Greg.tu@genesyslogic.com.tw \
    --cc=HL.Liu@genesyslogic.com.tw \
    --cc=Lucas.Lai@genesyslogic.com.tw \
    --cc=ben.chuang@genesyslogic.com.tw \
    --cc=benchuanggli@gmail.com \
    --cc=dlunev@chromium.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=takahiro.akashi@linaro.org \
    --cc=ulf.hansson@linaro.org \
    --cc=victor.shih@genesyslogic.com.tw \
    --cc=victorshihgli@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox