linux-mmc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Maxim Levitsky <maximlevitsky@gmail.com>
To: Philip Langdale <philipl@overt.org>
Cc: linux-kernel <linux-kernel@vger.kernel.org>,
	Maxim Levitsky <maximlevitsky@gmail.com>,
	adq_dvb@lidskialf.net,
	"linux-mmc@vger.kernel.org" <linux-mmc@vger.kernel.org>
Subject: [PATCH] mmc: make sdhci work with ricoh mmc controller
Date: Thu,  3 Jun 2010 04:16:27 +0300	[thread overview]
Message-ID: <1275527787-3783-1-git-send-email-maximlevitsky@gmail.com> (raw)
In-Reply-To: <1275516180.30272.4.camel@maxim-laptop>

The current way of disabling it is not well tested by vendor
and has all kinds of bugs that show up on resume from ram/disk.

Old way of disabling is still supported by
continuing to use CONFIG_MMC_RICOH_MMC.

Based on 'http://list.drzeus.cx/pipermail/sdhci-devel/2007-December/002085.html'

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
CC: adq_dvb@lidskialf.net
CC: linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>
---
 drivers/mmc/host/sdhci-pci.c |   34 ++++++++++++++++++++++++++++++++++
 drivers/mmc/host/sdhci.c     |    5 ++++-
 drivers/mmc/host/sdhci.h     |    2 ++
 3 files changed, 40 insertions(+), 1 deletions(-)

diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index 65483fd..3843780 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -17,6 +17,7 @@
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
 #include <linux/slab.h>
+#include <linux/device.h>
 
 #include <linux/mmc/host.h>
 
@@ -85,6 +86,26 @@ static int ricoh_probe(struct sdhci_pci_chip *chip)
 	    chip->pdev->subsystem_vendor == PCI_VENDOR_ID_SONY)
 		chip->quirks |= SDHCI_QUIRK_NO_CARD_NO_RESET;
 
+	/* To disable hardware races against MMC part */
+	device_disable_async_suspend(&chip->pci_dev->dev);
+	return 0;
+}
+
+static int ricoh_mmc_probe_slot(struct sdhci_pci_slot *slot)
+{
+	slot->host->caps =
+		((0x21 << SDHCI_TIMEOUT_CLK_SHIFT)
+			& SDHCI_TIMEOUT_CLK_MASK) |
+
+		((0x21 << SDHCI_CLOCK_BASE_SHIFT)
+			& SDHCI_CLOCK_BASE_MASK) |
+
+		SDHCI_TIMEOUT_CLK_UNIT |
+		SDHCI_CAN_VDD_330 |
+		SDHCI_CAN_DO_SDMA ;
+
+	/* To disable hardware races against SDHC part */
+	device_disable_async_suspend(&slot->chip->pci_dev->dev);
 	return 0;
 }
 
@@ -95,6 +116,11 @@ static const struct sdhci_pci_fixes sdhci_ricoh = {
 			  SDHCI_QUIRK_CLOCK_BEFORE_RESET,
 };
 
+static const struct sdhci_pci_fixes sdhci_ricoh_mmc = {
+	.probe_slot	= ricoh_mmc_probe_slot,
+	.quirks		= SDHCI_QUIRK_NO_CARD_NO_RESET,
+};
+
 static const struct sdhci_pci_fixes sdhci_ene_712 = {
 	.quirks		= SDHCI_QUIRK_SINGLE_POWER_WRITE |
 			  SDHCI_QUIRK_BROKEN_DMA,
@@ -374,6 +400,14 @@ static const struct pci_device_id pci_ids[] __devinitdata = {
 	},
 
 	{
+		.vendor         = PCI_VENDOR_ID_RICOH,
+		.device         = 0x843,
+		.subvendor      = PCI_ANY_ID,
+		.subdevice      = PCI_ANY_ID,
+		.driver_data    = (kernel_ulong_t)&sdhci_ricoh_mmc,
+	},
+
+	{
 		.vendor		= PCI_VENDOR_ID_ENE,
 		.device		= PCI_DEVICE_ID_ENE_CB712_SD,
 		.subvendor	= PCI_ANY_ID,
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index c6d1bd8..dbd9367 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1687,7 +1687,10 @@ int sdhci_add_host(struct sdhci_host *host)
 			host->version);
 	}
 
-	caps = sdhci_readl(host, SDHCI_CAPABILITIES);
+	if (host->caps)
+		caps = host->caps;
+	else
+		caps = sdhci_readl(host, SDHCI_CAPABILITIES);
 
 	if (host->quirks & SDHCI_QUIRK_FORCE_DMA)
 		host->flags |= SDHCI_USE_SDMA;
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index c846813..b41581a 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -292,6 +292,8 @@ struct sdhci_host {
 
 	struct timer_list	timer;		/* Timer for timeouts */
 
+	unsigned int		caps;		/* Alternative capabilities */
+
 	unsigned long		private[0] ____cacheline_aligned;
 };
 
-- 
1.7.0.4


       reply	other threads:[~2010-06-03  1:16 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1275516180.30272.4.camel@maxim-laptop>
2010-06-03  1:16 ` Maxim Levitsky [this message]
2010-06-03 16:11   ` [PATCH] mmc: make sdhci work with ricoh mmc controller Philip Langdale
2010-06-03 16:31     ` Maxim Levitsky
2010-06-03 16:39       ` Philip Langdale
2010-06-03 17:05         ` Philip Langdale
2010-06-03 17:35           ` Maxim Levitsky
2010-06-04  4:42             ` Philip Langdale
2010-06-04 10:07               ` Maxim Levitsky
2010-06-04 15:05                 ` Philip Langdale
2010-06-04 15:33                   ` Maxim Levitsky
2010-06-06 21:24                     ` Maxim Levitsky
2010-06-06 21:28                       ` [PATCH 1/2] " Maxim Levitsky
2010-06-06 23:11                         ` Philip Langdale
2010-06-07  0:37                           ` Maxim Levitsky
2010-06-07  1:41                             ` Philip Langdale
2010-06-11 19:08                               ` [PATCH v3] " Maxim Levitsky
2010-06-11 19:15                                 ` [PATCH v4] " maximlevitsky
2010-06-13 11:29                                   ` Maxim Levitsky
2010-06-13 16:06                                   ` Philip Langdale
2010-06-06 21:28                       ` [PATCH 2/2] mmc: fix mmc card disappearence on resume on ricoh mmc controllers Maxim Levitsky
2010-06-06 23:22                         ` Philip Langdale
2010-06-08  8:57                           ` Maxim Levitsky
2010-06-06 23:23                         ` Chris Ball
2010-06-07  0:33                           ` Maxim Levitsky
2010-06-07  5:47                             ` Chris Ball
2010-06-08  8:52                               ` Maxim Levitsky

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1275527787-3783-1-git-send-email-maximlevitsky@gmail.com \
    --to=maximlevitsky@gmail.com \
    --cc=adq_dvb@lidskialf.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=philipl@overt.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).