From: Wolfram Sang <w.sang@pengutronix.de>
To: linux-mmc@vger.kernel.org
Cc: Richard Zhu <r65037@freescale.com>, Wolfram Sang <w.sang@pengutronix.de>
Subject: [RFC] sdhci_pltfm: pass platform_data on custom init-call
Date: Tue, 21 Sep 2010 14:56:07 +0200 [thread overview]
Message-ID: <1285073767-19900-1-git-send-email-w.sang@pengutronix.de> (raw)
The custom init call may need more data to perform its job, so we pass it a
pointer to the platform_data, too. Now, for drivers extending sdhci-pltfm (like
sdhci-cns3xxx), a fixed platform_data is used according to the platform device
id. Because that one does not contain board specific information, we simply
name the board specific information information priv_pdata and pass it to the
init routine as well. (Note: the old behaviour was that you could override the
platform id specific data with your own. However, one can still do this by
using the "sdhci" id instead of "sdhci-<something>".)
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
---
This approach has its issues, but all I tried had some. So, let's start arguing
over code ;)
drivers/mmc/host/sdhci-esdhc.c | 3 ++-
drivers/mmc/host/sdhci-pltfm.c | 11 ++++++++---
include/linux/mmc/sdhci-pltfm.h | 2 +-
3 files changed, 11 insertions(+), 5 deletions(-)
diff --git a/drivers/mmc/host/sdhci-esdhc.c b/drivers/mmc/host/sdhci-esdhc.c
index 132e9c9..ccdafd9 100644
--- a/drivers/mmc/host/sdhci-esdhc.c
+++ b/drivers/mmc/host/sdhci-esdhc.c
@@ -97,7 +97,8 @@ static unsigned int esdhc_pltfm_get_min_clock(struct sdhci_host *host)
return clk_get_rate(pltfm_host->clk) / 256 / 16;
}
-static int esdhc_pltfm_init(struct sdhci_host *host)
+static int esdhc_pltfm_init(struct sdhci_host *host,
+ struct sdhci_pltfm_data *pdata, void *priv_pdata)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct clk *clk;
diff --git a/drivers/mmc/host/sdhci-pltfm.c b/drivers/mmc/host/sdhci-pltfm.c
index 6ba3f3d..04f3117 100644
--- a/drivers/mmc/host/sdhci-pltfm.c
+++ b/drivers/mmc/host/sdhci-pltfm.c
@@ -52,15 +52,20 @@ static struct sdhci_ops sdhci_pltfm_ops = {
static int __devinit sdhci_pltfm_probe(struct platform_device *pdev)
{
- struct sdhci_pltfm_data *pdata = pdev->dev.platform_data;
const struct platform_device_id *platid = platform_get_device_id(pdev);
+ struct sdhci_pltfm_data *pdata;
+ void *priv_pdata = NULL;
struct sdhci_host *host;
struct sdhci_pltfm_host *pltfm_host;
struct resource *iomem;
int ret;
- if (!pdata && platid && platid->driver_data)
+ if (platid && platid->driver_data) {
pdata = (void *)platid->driver_data;
+ priv_pdata = pdev->dev.platform_data;
+ } else {
+ pdata = pdev->dev.platform_data;
+ }
iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!iomem) {
@@ -108,7 +113,7 @@ static int __devinit sdhci_pltfm_probe(struct platform_device *pdev)
}
if (pdata && pdata->init) {
- ret = pdata->init(host);
+ ret = pdata->init(host, pdata, priv_pdata);
if (ret)
goto err_plat_init;
}
diff --git a/include/linux/mmc/sdhci-pltfm.h b/include/linux/mmc/sdhci-pltfm.h
index 0239bd7..e14fce3 100644
--- a/include/linux/mmc/sdhci-pltfm.h
+++ b/include/linux/mmc/sdhci-pltfm.h
@@ -28,7 +28,7 @@ struct sdhci_host;
struct sdhci_pltfm_data {
struct sdhci_ops *ops;
unsigned int quirks;
- int (*init)(struct sdhci_host *host);
+ int (*init)(struct sdhci_host *host, struct sdhci_pltfm_data *pdata, void* priv_pdata);
void (*exit)(struct sdhci_host *host);
};
--
1.7.1
next reply other threads:[~2010-09-21 12:56 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-09-21 12:56 Wolfram Sang [this message]
2010-09-27 2:47 ` [RFC] sdhci_pltfm: pass platform_data on custom init-call zhangfei gao
2010-09-27 6:04 ` Peppe CAVALLARO
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1285073767-19900-1-git-send-email-w.sang@pengutronix.de \
--to=w.sang@pengutronix.de \
--cc=linux-mmc@vger.kernel.org \
--cc=r65037@freescale.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox