From: Adrian Hunter <adrian.hunter@intel.com>
To: Chris Ball <cjb@laptop.org>
Cc: linux-mmc <linux-mmc@vger.kernel.org>,
Philip Rakity <prakity@marvell.com>,
Adrian Hunter <adrian.hunter@intel.com>
Subject: [PATCH 2/2] mmc: sdhci-pci: allow 8-bit bus width for Intel Medfield eMMCs
Date: Wed, 29 Jun 2011 14:23:47 +0300 [thread overview]
Message-ID: <1309346627-32630-3-git-send-email-adrian.hunter@intel.com> (raw)
In-Reply-To: <1309346627-32630-1-git-send-email-adrian.hunter@intel.com>
Unless MMC_CAP_8_BIT_DATA is set, the bus width defaults to 4.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
---
drivers/mmc/host/sdhci-pci.c | 21 ++++++++++++++++-----
1 files changed, 16 insertions(+), 5 deletions(-)
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index e1ae855..26c5286 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -163,6 +163,12 @@ static int mrst_hc_probe(struct sdhci_pci_chip *chip)
return 0;
}
+static int mfd_emmc_probe_slot(struct sdhci_pci_slot *slot)
+{
+ slot->host->mmc->caps |= MMC_CAP_8_BIT_DATA;
+ return 0;
+}
+
static const struct sdhci_pci_fixes sdhci_intel_mrst_hc0 = {
.quirks = SDHCI_QUIRK_BROKEN_ADMA | SDHCI_QUIRK_NO_HISPD_BIT,
.probe_slot = mrst_hc_probe_slot,
@@ -177,8 +183,13 @@ static const struct sdhci_pci_fixes sdhci_intel_mfd_sd = {
.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
};
-static const struct sdhci_pci_fixes sdhci_intel_mfd_emmc_sdio = {
+static const struct sdhci_pci_fixes sdhci_intel_mfd_sdio = {
+ .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
+};
+
+static const struct sdhci_pci_fixes sdhci_intel_mfd_emmc = {
.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
+ .probe_slot = mfd_emmc_probe_slot,
};
/* O2Micro extra registers */
@@ -689,7 +700,7 @@ static const struct pci_device_id pci_ids[] __devinitdata = {
.device = PCI_DEVICE_ID_INTEL_MFD_SDIO1,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
- .driver_data = (kernel_ulong_t)&sdhci_intel_mfd_emmc_sdio,
+ .driver_data = (kernel_ulong_t)&sdhci_intel_mfd_sdio,
},
{
@@ -697,7 +708,7 @@ static const struct pci_device_id pci_ids[] __devinitdata = {
.device = PCI_DEVICE_ID_INTEL_MFD_SDIO2,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
- .driver_data = (kernel_ulong_t)&sdhci_intel_mfd_emmc_sdio,
+ .driver_data = (kernel_ulong_t)&sdhci_intel_mfd_sdio,
},
{
@@ -705,7 +716,7 @@ static const struct pci_device_id pci_ids[] __devinitdata = {
.device = PCI_DEVICE_ID_INTEL_MFD_EMMC0,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
- .driver_data = (kernel_ulong_t)&sdhci_intel_mfd_emmc_sdio,
+ .driver_data = (kernel_ulong_t)&sdhci_intel_mfd_emmc,
},
{
@@ -713,7 +724,7 @@ static const struct pci_device_id pci_ids[] __devinitdata = {
.device = PCI_DEVICE_ID_INTEL_MFD_EMMC1,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
- .driver_data = (kernel_ulong_t)&sdhci_intel_mfd_emmc_sdio,
+ .driver_data = (kernel_ulong_t)&sdhci_intel_mfd_emmc,
},
{
--
1.7.4.4
next prev parent reply other threads:[~2011-06-29 11:24 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-29 11:23 [PATCH 0/2] mmc: sdhci-pci: add 8-bit bus width support for Medfield eMMCs Adrian Hunter
2011-06-29 11:23 ` [PATCH 1/2] mmc: sdhci-pci: add 8-bit bus width support for mrst hc0 Adrian Hunter
2011-06-29 11:23 ` Adrian Hunter [this message]
2011-07-09 20:53 ` [PATCH 0/2] mmc: sdhci-pci: add 8-bit bus width support for Medfield eMMCs Chris Ball
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1309346627-32630-3-git-send-email-adrian.hunter@intel.com \
--to=adrian.hunter@intel.com \
--cc=cjb@laptop.org \
--cc=linux-mmc@vger.kernel.org \
--cc=prakity@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox