[PATCH 5/5 v2] mmc: bfin_sdh: Reset SD controller when resume from power saving mode.

[Sonic Zhang <sonic.adi@gmail.com>]

From: Sonic Zhang <sonic.zhang@analog.com>

Without reset, SD controller may stay in disable mode, SD card can't
be detected when resume from power saving mode.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
---
 drivers/mmc/host/bfin_sdh.c |   35 +++++++++++++++++++----------------
 1 files changed, 19 insertions(+), 16 deletions(-)

diff --git a/drivers/mmc/host/bfin_sdh.c b/drivers/mmc/host/bfin_sdh.c
index 7776614..b9b463e 100644
--- a/drivers/mmc/host/bfin_sdh.c
+++ b/drivers/mmc/host/bfin_sdh.c
@@ -505,6 +505,23 @@ static irqreturn_t sdh_stat_irq(int irq, void *devid)
 	return IRQ_RETVAL(handled);
 }
 
+static void sdh_reset(void)
+{
+#if defined(CONFIG_BF54x)
+	/* Secure Digital Host shares DMA with Nand controller */
+	bfin_write_DMAC1_PERIMUX(bfin_read_DMAC1_PERIMUX() | 0x1);
+#endif
+
+	bfin_write_SDH_CFG(bfin_read_SDH_CFG() | CLKS_EN);
+	SSYNC();
+
+	/* Disable card inserting detection pin. set MMC_CAP_NEEDS_POLL, and
+	 * mmc stack will do the detection.
+	 */
+	bfin_write_SDH_CFG((bfin_read_SDH_CFG() & 0x1F) | (PUP_SDDAT | PUP_SDDAT3));
+	SSYNC();
+}
+
 static int __devinit sdh_probe(struct platform_device *pdev)
 {
 	struct mmc_host *mmc;
@@ -581,19 +598,8 @@ static int __devinit sdh_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "unable to request peripheral pins\n");
 		goto out4;
 	}
-#if defined(CONFIG_BF54x)
-	/* Secure Digital Host shares DMA with Nand controller */
-	bfin_write_DMAC1_PERIMUX(bfin_read_DMAC1_PERIMUX() | 0x1);
-#endif
 
-	bfin_write_SDH_CFG(bfin_read_SDH_CFG() | CLKS_EN);
-	SSYNC();
-
-	/* Disable card inserting detection pin. set MMC_CAP_NEEDS_POLL, and
-	 * mmc stack will do the detection.
-	 */
-	bfin_write_SDH_CFG((bfin_read_SDH_CFG() & 0x1F) | (PUP_SDDAT | PUP_SDDAT3));
-	SSYNC();
+	sdh_reset();
 
 	mmc_add_host(mmc);
 	return 0;
@@ -660,10 +666,7 @@ static int sdh_resume(struct platform_device *dev)
 		return ret;
 	}
 
-#if defined(CONFIG_BF54x)
-	/* Secure Digital Host shares DMA with Nand controller */
-	bfin_write_DMAC1_PERIMUX(bfin_read_DMAC1_PERIMUX() | 0x1);
-#endif
+	sdh_reset();
 
 	if (mmc)
 		ret = mmc_resume_host(mmc);
-- 
1.7.0.4