[PATCH 2/3] mmc: sdhci-s3c: enable polling to detect card by itself

[yongd <yongd@marvell.com>]

In the current code logic, sdhci_add_host() will enable the polling
method (set MMC_CAP_NEEDS_POLL) for a removable card (MMC_CAP_
NONREMOVABLE is not set) whose host's internal card detection method
is disabled for some reason (SDHCI_QUIRK_BROKEN_CARD_DETECTION is set).

However, this is improper since we can have some other card detection
methods besides host internal card detection and polling method. As a
result, sdhci_add_host() will redundantly enable polling for a card
which actually uses other methods, eg external GPIO.

So, we plan to remove such improper setting in sdhci_add_host(). But
before this, this patch is a MUST, which enables polling in host driver
itself when the detection type is S3C_SDHCI_CD_NONE.

Change-Id: I28bd6765e6c6a9dd6c288ff4ca6ecf7268a2d8ed
Signed-off-by: yongd <yongd@marvell.com>
---
 drivers/mmc/host/sdhci-s3c.c |    3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
index 2903949..0701f08 100644
--- a/drivers/mmc/host/sdhci-s3c.c
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -687,6 +687,9 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
 	    pdata->cd_type == S3C_SDHCI_CD_PERMANENT)
 		host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
 
+	if (pdata->cd_type == S3C_SDHCI_CD_NONE)
+		host->mmc->caps = MMC_CAP_NEEDS_POLL;
+
 	if (pdata->cd_type == S3C_SDHCI_CD_PERMANENT)
 		host->mmc->caps = MMC_CAP_NONREMOVABLE;
 
-- 
1.7.9.5