From: Fabio Estevam <festevam@gmail.com>
To: cjb@laptop.org
Cc: shawn.guo@linaro.org, marex@denx.de, linux-mmc@vger.kernel.org,
Fabio Estevam <fabio.estevam@freescale.com>
Subject: [PATCH v2] mmc: mxs-mmc: Remove platform data
Date: Wed, 31 Oct 2012 09:22:58 -0200 [thread overview]
Message-ID: <1351682578-12922-1-git-send-email-festevam@gmail.com> (raw)
From: Fabio Estevam <fabio.estevam@freescale.com>
All MXS users have been converted to device tree and the board files have been
removed.
No need to keep platform data in the driver.
Also move bus_width declaration in the beggining of mxs_mmc_probe() to avoid:
'warning: ISO C90 forbids mixed declarations and code'.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
----
Changes since v1:
- Also remove mxs_mmc_platform_data and linux/mmc/mxs-mmc.h, which was used only
to include mxs_mmc_platform_data definition.
drivers/mmc/host/mxs-mmc.c | 31 ++++++++++---------------------
include/linux/mmc/mxs-mmc.h | 19 -------------------
2 files changed, 10 insertions(+), 40 deletions(-)
delete mode 100644 include/linux/mmc/mxs-mmc.h
diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
index 80d1e6d..206fe49 100644
--- a/drivers/mmc/host/mxs-mmc.c
+++ b/drivers/mmc/host/mxs-mmc.c
@@ -43,7 +43,6 @@
#include <linux/module.h>
#include <linux/pinctrl/consumer.h>
#include <linux/stmp_device.h>
-#include <linux/mmc/mxs-mmc.h>
#include <linux/spi/mxs-spi.h>
#define DRIVER_NAME "mxs-mmc"
@@ -593,13 +592,13 @@ static int mxs_mmc_probe(struct platform_device *pdev)
struct mxs_mmc_host *host;
struct mmc_host *mmc;
struct resource *iores, *dmares;
- struct mxs_mmc_platform_data *pdata;
struct pinctrl *pinctrl;
int ret = 0, irq_err, irq_dma;
dma_cap_mask_t mask;
struct regulator *reg_vmmc;
enum of_gpio_flags flags;
struct mxs_ssp *ssp;
+ u32 bus_width = 0;
iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
dmares = platform_get_resource(pdev, IORESOURCE_DMA, 0);
@@ -682,25 +681,15 @@ static int mxs_mmc_probe(struct platform_device *pdev)
mmc->caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED |
MMC_CAP_SDIO_IRQ | MMC_CAP_NEEDS_POLL;
- pdata = mmc_dev(host->mmc)->platform_data;
- if (!pdata) {
- u32 bus_width = 0;
- of_property_read_u32(np, "bus-width", &bus_width);
- if (bus_width == 4)
- mmc->caps |= MMC_CAP_4_BIT_DATA;
- else if (bus_width == 8)
- mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA;
- host->wp_gpio = of_get_named_gpio_flags(np, "wp-gpios", 0,
- &flags);
- if (flags & OF_GPIO_ACTIVE_LOW)
- host->wp_inverted = 1;
- } else {
- if (pdata->flags & SLOTF_8_BIT_CAPABLE)
- mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA;
- if (pdata->flags & SLOTF_4_BIT_CAPABLE)
- mmc->caps |= MMC_CAP_4_BIT_DATA;
- host->wp_gpio = pdata->wp_gpio;
- }
+ of_property_read_u32(np, "bus-width", &bus_width);
+ if (bus_width == 4)
+ mmc->caps |= MMC_CAP_4_BIT_DATA;
+ else if (bus_width == 8)
+ mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA;
+ host->wp_gpio = of_get_named_gpio_flags(np, "wp-gpios", 0, &flags);
+
+ if (flags & OF_GPIO_ACTIVE_LOW)
+ host->wp_inverted = 1;
mmc->f_min = 400000;
mmc->f_max = 288000000;
diff --git a/include/linux/mmc/mxs-mmc.h b/include/linux/mmc/mxs-mmc.h
deleted file mode 100644
index 7c2ad3a..0000000
--
1.7.9.5
next reply other threads:[~2012-10-31 11:23 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-31 11:22 Fabio Estevam [this message]
2012-10-31 15:45 ` [PATCH v2] mmc: mxs-mmc: Remove platform data Shawn Guo
2012-10-31 15:49 ` Fabio Estevam
2012-11-17 20:32 ` Chris Ball
2012-10-31 16:38 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1351682578-12922-1-git-send-email-festevam@gmail.com \
--to=festevam@gmail.com \
--cc=cjb@laptop.org \
--cc=fabio.estevam@freescale.com \
--cc=linux-mmc@vger.kernel.org \
--cc=marex@denx.de \
--cc=shawn.guo@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox