From: Joseph Lo <josephl@nvidia.com>
To: Chris Ball <cjb@laptop.org>, Stephen Warren <swarren@wwwdotorg.org>
Cc: linux-tegra@vger.kernel.org, linux-mmc@vger.kernel.org,
Joseph Lo <josephl@nvidia.com>
Subject: [PATCH 1/2] ARM: dts: tegra: fix the activate polarity of cd-gpio in mmc host
Date: Wed, 20 Feb 2013 15:05:01 +0800 [thread overview]
Message-ID: <1361343902-15223-2-git-send-email-josephl@nvidia.com> (raw)
In-Reply-To: <1361343902-15223-1-git-send-email-josephl@nvidia.com>
The GPIO pin of SD slot card detection should active low.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
---
arch/arm/boot/dts/tegra20-harmony.dts | 4 ++--
arch/arm/boot/dts/tegra20-paz00.dts | 2 +-
arch/arm/boot/dts/tegra20-seaboard.dts | 2 +-
arch/arm/boot/dts/tegra20-trimslice.dts | 2 +-
arch/arm/boot/dts/tegra20-ventana.dts | 2 +-
arch/arm/boot/dts/tegra20-whistler.dts | 1 +
arch/arm/boot/dts/tegra30-beaver.dts | 2 +-
arch/arm/boot/dts/tegra30-cardhu.dtsi | 2 +-
8 files changed, 9 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts
index 61d027f..1f79c0d 100644
--- a/arch/arm/boot/dts/tegra20-harmony.dts
+++ b/arch/arm/boot/dts/tegra20-harmony.dts
@@ -437,7 +437,7 @@
sdhci@c8000200 {
status = "okay";
- cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+ cd-gpios = <&gpio 69 1>; /* gpio PI5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
power-gpios = <&gpio 155 0>; /* gpio PT3 */
bus-width = <4>;
@@ -445,7 +445,7 @@
sdhci@c8000600 {
status = "okay";
- cd-gpios = <&gpio 58 0>; /* gpio PH2 */
+ cd-gpios = <&gpio 58 1>; /* gpio PH2 */
wp-gpios = <&gpio 59 0>; /* gpio PH3 */
power-gpios = <&gpio 70 0>; /* gpio PI6 */
bus-width = <8>;
diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts
index 54d6fce..9db36da 100644
--- a/arch/arm/boot/dts/tegra20-paz00.dts
+++ b/arch/arm/boot/dts/tegra20-paz00.dts
@@ -436,7 +436,7 @@
sdhci@c8000000 {
status = "okay";
- cd-gpios = <&gpio 173 0>; /* gpio PV5 */
+ cd-gpios = <&gpio 173 1>; /* gpio PV5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
power-gpios = <&gpio 169 0>; /* gpio PV1 */
bus-width = <4>;
diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts
index 37b3a57..715a8b8 100644
--- a/arch/arm/boot/dts/tegra20-seaboard.dts
+++ b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -584,7 +584,7 @@
sdhci@c8000400 {
status = "okay";
- cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+ cd-gpios = <&gpio 69 1>; /* gpio PI5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
power-gpios = <&gpio 70 0>; /* gpio PI6 */
bus-width = <4>;
diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts
index 5d79e4f..98f3e44 100644
--- a/arch/arm/boot/dts/tegra20-trimslice.dts
+++ b/arch/arm/boot/dts/tegra20-trimslice.dts
@@ -325,7 +325,7 @@
sdhci@c8000600 {
status = "okay";
- cd-gpios = <&gpio 121 0>; /* gpio PP1 */
+ cd-gpios = <&gpio 121 1>; /* gpio PP1 */
wp-gpios = <&gpio 122 0>; /* gpio PP2 */
bus-width = <4>;
};
diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts
index 425c890..4aef56f 100644
--- a/arch/arm/boot/dts/tegra20-ventana.dts
+++ b/arch/arm/boot/dts/tegra20-ventana.dts
@@ -520,7 +520,7 @@
sdhci@c8000400 {
status = "okay";
- cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+ cd-gpios = <&gpio 69 1>; /* gpio PI5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
power-gpios = <&gpio 70 0>; /* gpio PI6 */
bus-width = <4>;
diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts
index ea57c0f..5762188 100644
--- a/arch/arm/boot/dts/tegra20-whistler.dts
+++ b/arch/arm/boot/dts/tegra20-whistler.dts
@@ -510,6 +510,7 @@
sdhci@c8000400 {
status = "okay";
+ cd-gpios = <&gpio 69 1>; /* gpio PI5 */
wp-gpios = <&gpio 173 0>; /* gpio PV5 */
bus-width = <8>;
};
diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts
index 8ff2ff2..0a2cd24 100644
--- a/arch/arm/boot/dts/tegra30-beaver.dts
+++ b/arch/arm/boot/dts/tegra30-beaver.dts
@@ -257,7 +257,7 @@
sdhci@78000000 {
status = "okay";
- cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+ cd-gpios = <&gpio 69 1>; /* gpio PI5 */
wp-gpios = <&gpio 155 0>; /* gpio PT3 */
power-gpios = <&gpio 31 0>; /* gpio PD7 */
bus-width = <4>;
diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
index 1749927..3e2d210 100644
--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -311,7 +311,7 @@
sdhci@78000000 {
status = "okay";
- cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+ cd-gpios = <&gpio 69 1>; /* gpio PI5 */
wp-gpios = <&gpio 155 0>; /* gpio PT3 */
power-gpios = <&gpio 31 0>; /* gpio PD7 */
bus-width = <4>;
--
1.8.1.1
next prev parent reply other threads:[~2013-02-20 7:05 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-20 7:05 [PATCH 0/2] mmc: tegra: use mmc_of_parse to get support of standard MMC DT binding Joseph Lo
2013-02-20 7:05 ` Joseph Lo [this message]
[not found] ` <1361343902-15223-2-git-send-email-josephl-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-02-20 16:59 ` [PATCH 1/2] ARM: dts: tegra: fix the activate polarity of cd-gpio in mmc host Stephen Warren
[not found] ` <512500EB.1070802-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2013-02-21 8:18 ` Thierry Reding
[not found] ` <20130221081809.GB7718-RM9K5IK7kjIQXX3q8xo1gnVAuStQJXxyR5q1nwbD4aMs9pC9oP6+/A@public.gmane.org>
2013-02-21 8:30 ` Joseph Lo
2013-02-20 7:05 ` [PATCH 2/2] mmc: tegra: use mmc_of_parse to get the support of standard MMC DT bindings Joseph Lo
[not found] ` <1361343902-15223-3-git-send-email-josephl-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-02-20 17:07 ` Stephen Warren
[not found] ` <512502D7.4090605-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2013-02-21 2:23 ` Joseph Lo
[not found] ` <1361413425.5678.8.camel-yx3yKKdKkHfc7b1ADBJPm0n48jw8i0AO@public.gmane.org>
2013-02-21 4:20 ` Stephen Warren
[not found] ` <5125A075.5000000-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2013-02-21 6:26 ` Joseph Lo
2013-02-21 6:34 ` Joseph Lo
2013-02-21 8:03 ` Thierry Reding
[not found] ` <20130221080306.GA7718-RM9K5IK7kjIQXX3q8xo1gnVAuStQJXxyR5q1nwbD4aMs9pC9oP6+/A@public.gmane.org>
2013-02-21 8:15 ` Joseph Lo
[not found] ` <1361427997.5678.59.camel-yx3yKKdKkHfc7b1ADBJPm0n48jw8i0AO@public.gmane.org>
2013-02-21 18:50 ` Stephen Warren
2013-02-21 22:44 ` Guennadi Liakhovetski
[not found] ` <Pine.LNX.4.64.1302212333330.10403-0199iw4Nj15frtckUFj5Ag@public.gmane.org>
2013-02-22 2:07 ` Joseph Lo
[not found] ` <1361343902-15223-1-git-send-email-josephl-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-02-21 8:24 ` [PATCH 0/2] mmc: tegra: use mmc_of_parse to get support of standard MMC DT binding Thierry Reding
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1361343902-15223-2-git-send-email-josephl@nvidia.com \
--to=josephl@nvidia.com \
--cc=cjb@laptop.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=swarren@wwwdotorg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox