linux-mmc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Adrian Hunter <adrian.hunter@intel.com>
To: Chris Ball <cjb@laptop.org>
Cc: linux-mmc@vger.kernel.org, Adrian Hunter <adrian.hunter@intel.com>
Subject: [PATCH 1/2] mmc: sdhci-pci: add support for eMMC hardware reset for BYT eMMC.
Date: Thu, 13 Jun 2013 11:50:26 +0300	[thread overview]
Message-ID: <1371113427-8257-2-git-send-email-adrian.hunter@intel.com> (raw)
In-Reply-To: <1371113427-8257-1-git-send-email-adrian.hunter@intel.com>

Add support for eMMC hardware reset for BYT eMMC.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
---
 drivers/mmc/host/sdhci-pci.c | 32 ++++++++++++++++++++++++++++++--
 1 file changed, 30 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index 611331a..e082fac 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -77,6 +77,8 @@ struct sdhci_pci_slot {
 	int			rst_n_gpio;
 	int			cd_gpio;
 	int			cd_irq;
+
+	void (*hw_reset)(struct sdhci_host *host);
 };
 
 struct sdhci_pci_chip {
@@ -307,10 +309,27 @@ static const struct sdhci_pci_fixes sdhci_intel_pch_sdio = {
 	.probe_slot	= pch_hc_probe_slot,
 };
 
+static void sdhci_pci_int_hw_reset(struct sdhci_host *host)
+{
+	u8 reg;
+
+	reg = sdhci_readb(host, SDHCI_POWER_CONTROL);
+	reg |= 0x10;
+	sdhci_writeb(host, reg, SDHCI_POWER_CONTROL);
+	/* For eMMC, minimum is 1us but give it 9us for good measure */
+	udelay(9);
+	reg &= ~0x10;
+	sdhci_writeb(host, reg, SDHCI_POWER_CONTROL);
+	/* For eMMC, minimum is 200us but give it 300us for good measure */
+	usleep_range(300, 1000);
+}
+
 static int byt_emmc_probe_slot(struct sdhci_pci_slot *slot)
 {
-	slot->host->mmc->caps |= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE;
+	slot->host->mmc->caps |= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE |
+				 MMC_CAP_HW_RESET;
 	slot->host->mmc->caps2 |= MMC_CAP2_HC_ERASE_SZ;
+	slot->hw_reset = sdhci_pci_int_hw_reset;
 	return 0;
 }
 
@@ -1016,7 +1035,7 @@ static int sdhci_pci_bus_width(struct sdhci_host *host, int width)
 	return 0;
 }
 
-static void sdhci_pci_hw_reset(struct sdhci_host *host)
+static void sdhci_pci_gpio_hw_reset(struct sdhci_host *host)
 {
 	struct sdhci_pci_slot *slot = sdhci_priv(host);
 	int rst_n_gpio = slot->rst_n_gpio;
@@ -1031,6 +1050,14 @@ static void sdhci_pci_hw_reset(struct sdhci_host *host)
 	usleep_range(300, 1000);
 }
 
+static void sdhci_pci_hw_reset(struct sdhci_host *host)
+{
+	struct sdhci_pci_slot *slot = sdhci_priv(host);
+
+	if (slot->hw_reset)
+		slot->hw_reset(host);
+}
+
 static const struct sdhci_ops sdhci_pci_ops = {
 	.enable_dma	= sdhci_pci_enable_dma,
 	.platform_bus_width	= sdhci_pci_bus_width,
@@ -1328,6 +1355,7 @@ static struct sdhci_pci_slot *sdhci_pci_probe_slot(
 		if (!gpio_request(slot->rst_n_gpio, "eMMC_reset")) {
 			gpio_direction_output(slot->rst_n_gpio, 1);
 			slot->host->mmc->caps |= MMC_CAP_HW_RESET;
+			slot->hw_reset = sdhci_pci_gpio_hw_reset;
 		} else {
 			dev_warn(&pdev->dev, "failed to request rst_n_gpio\n");
 			slot->rst_n_gpio = -EINVAL;
-- 
1.7.11.7


  reply	other threads:[~2013-06-13  8:45 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-06-13  8:50 [PATCH 0/2] mmc: add support for eMMC hardware reset for BYT eMMC Adrian Hunter
2013-06-13  8:50 ` Adrian Hunter [this message]
2013-06-13  8:50 ` [PATCH 2/2] mmc: sdhci-acpi: add support for eMMC hardware reset for HID 80860F14 Adrian Hunter
2013-06-27 15:54 ` [PATCH 0/2] mmc: add support for eMMC hardware reset for BYT eMMC Chris Ball
2013-06-28  7:26   ` Adrian Hunter
2013-06-28 13:59     ` Chris Ball

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1371113427-8257-2-git-send-email-adrian.hunter@intel.com \
    --to=adrian.hunter@intel.com \
    --cc=cjb@laptop.org \
    --cc=linux-mmc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).