From: <dinguyen@altera.com>
To: dinh.linux@gmail.com, arnd@arndb.de, mturquette@linaro.org,
rob.herring@calxeda.com, pawel.moll@arm.com,
mark.rutland@arm.com, ian.campbell@citrix.com, cjb@laptop.org,
jh80.chung@samsung.com, tgih.jun@samsung.com
Cc: devicetree@vger.kernel.org, linux-mmc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Dinh Nguyen <dinguyen@altera.com>
Subject: [PATCHv3 2/4] arm: dts: Add a system manager compatible property
Date: Wed, 4 Dec 2013 16:52:54 -0600 [thread overview]
Message-ID: <1386197576-3825-3-git-send-email-dinguyen@altera.com> (raw)
In-Reply-To: <1386197576-3825-1-git-send-email-dinguyen@altera.com>
From: Dinh Nguyen <dinguyen@altera.com>
The "altr,sysmgr-sdmmc-sdr" compatible property is used for the SOCFPGA
clk-sysmgr driver. This property represents the register inside the
system manager that controls the clock phase of the SD/MMC driver.
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
---
v3: Cannot use the syscon driver along with the clock because as of v3.13-rc1,
the syscon driver is loaded after the clocks.
v2: Add syscon
---
.../bindings/arm/altera/socfpga-system.txt | 10 ++++++++++
arch/arm/boot/dts/socfpga.dtsi | 14 +++++++++++---
2 files changed, 21 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-system.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-system.txt
index f4d04a0..7a6c7ed 100644
--- a/Documentation/devicetree/bindings/arm/altera/socfpga-system.txt
+++ b/Documentation/devicetree/bindings/arm/altera/socfpga-system.txt
@@ -5,9 +5,19 @@ Required properties:
- reg : Should contain 1 register ranges(address and length)
- cpu1-start-addr : CPU1 start address in hex.
+Optional properties:
+- compatible = "altr,sysmgr-sdmmc-sdr". This compatible property is used
+to represent the clock phase settings for the SD/MMC IP.
+
Example:
sysmgr@ffd08000 {
compatible = "altr,sys-mgr";
reg = <0xffd08000 0x1000>;
cpu1-start-addr = <0xffd080c4>;
+
+ sysmgr_sdr_mmc: sysmgr_sdr_mmc {
+ #clock-cells = <0>;
+ compatible = "altr,sysmgr-sdmmc-sdr";
+ reg = <0x108 1>;
+ };
};
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index f936476..a6a13b3 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -522,9 +522,17 @@
reg = <0xffd05000 0x1000>;
};
- sysmgr@ffd08000 {
- compatible = "altr,sys-mgr";
- reg = <0xffd08000 0x4000>;
+ sysmgr: sysmgr@ffd08000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "altr,sys-mgr";
+ reg = <0xffd08000 0x4000>;
+
+ sysmgr_sdr_mmc: sysmgr_sdr_mmc {
+ #clock-cells = <0>;
+ compatible = "altr,sysmgr-sdmmc-sdr";
+ reg = <0x108 1>;
};
+ };
};
};
--
1.7.9.5
next prev parent reply other threads:[~2013-12-04 22:54 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-04 22:52 [PATCHv3 0/4] socfpga: Enable SD/MMC support dinguyen
2013-12-04 22:52 ` [PATCHv3 1/4] clk: socfpga: Add a clock driver for SOCFPGA's system manager dinguyen
2013-12-05 3:00 ` Arnd Bergmann
2013-12-04 22:52 ` dinguyen [this message]
2013-12-05 11:40 ` [PATCHv3 2/4] arm: dts: Add a system manager compatible property Mark Rutland
2013-12-04 22:52 ` [PATCHv3 3/4] mmc: dw_mmc-socfpga: Clean up SOCFPGA platform specific funcationality dinguyen
2013-12-05 11:47 ` Mark Rutland
2013-12-05 16:18 ` Dinh Nguyen
2013-12-04 22:52 ` [PATCHv3 4/4] arm: dts: Add support for SD/MMC on SOCFPGA dinguyen
2013-12-05 3:07 ` Arnd Bergmann
2013-12-05 16:14 ` Dinh Nguyen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1386197576-3825-3-git-send-email-dinguyen@altera.com \
--to=dinguyen@altera.com \
--cc=arnd@arndb.de \
--cc=cjb@laptop.org \
--cc=devicetree@vger.kernel.org \
--cc=dinh.linux@gmail.com \
--cc=ian.campbell@citrix.com \
--cc=jh80.chung@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-mmc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mturquette@linaro.org \
--cc=pawel.moll@arm.com \
--cc=rob.herring@calxeda.com \
--cc=tgih.jun@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox