From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tim Kryger Subject: [PATCH v4 2/8] ARM: dts: Specify clocks for UARTs on bcm11351 Date: Thu, 5 Dec 2013 11:20:38 -0800 Message-ID: <1386271244-3927-3-git-send-email-tim.kryger@linaro.org> References: <1386271244-3927-1-git-send-email-tim.kryger@linaro.org> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1386271244-3927-1-git-send-email-tim.kryger@linaro.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: Christian Daudt , Rob Herring , Pawel Moll , Mark Rutland , Stephen Warren , Ian Campbell , Daniel Lezcano , Thomas Gleixner , Chris Ball , Axel Lin Cc: Device Tree List , Linaro Patches List , Tim Kryger , Linux MMC List , Linux Kernel Mailing List , Linux ARM Kernel List List-Id: linux-mmc@vger.kernel.org The frequency property in "snps,dw-apb-uart" entries are no longer required if the rate of the external clock can be determined using the clk api (see e302cd9 serial: 8250_dw: add support for clk api). This patch replaces the frequency property in the UART nodes of bcm11351.dtsi with references to the relevant clocks following the common clock binding. Signed-off-by: Tim Kryger Reviewed-by: Markus Mayer Reviewed-by: Matt Porter --- arch/arm/boot/dts/bcm11351.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi index eca6fbc..9b99c52 100644 --- a/arch/arm/boot/dts/bcm11351.dtsi +++ b/arch/arm/boot/dts/bcm11351.dtsi @@ -43,7 +43,7 @@ compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart"; status = "disabled"; reg = <0x3e000000 0x1000>; - clock-frequency = <13000000>; + clocks = <&uartb_clk>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; @@ -53,7 +53,7 @@ compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart"; status = "disabled"; reg = <0x3e001000 0x1000>; - clock-frequency = <13000000>; + clocks = <&uartb2_clk>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; @@ -63,7 +63,7 @@ compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart"; status = "disabled"; reg = <0x3e002000 0x1000>; - clock-frequency = <13000000>; + clocks = <&uartb3_clk>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; @@ -73,7 +73,7 @@ compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart"; status = "disabled"; reg = <0x3e003000 0x1000>; - clock-frequency = <13000000>; + clocks = <&uartb4_clk>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; -- 1.8.0.1