From: Alexander Shiyan <shc_work@mail.ru>
To: linux-mmc@vger.kernel.org
Cc: Chris Ball <chris@printf.net>, Shawn Guo <shawn.guo@linaro.org>,
Sascha Hauer <kernel@pengutronix.de>,
Alexander Shiyan <shc_work@mail.ru>
Subject: [PATCH 1/2] mmc: mxcmmc: Convert to devm-* API
Date: Sat, 22 Feb 2014 18:46:11 +0400 [thread overview]
Message-ID: <1393080372-6760-1-git-send-email-shc_work@mail.ru> (raw)
Replace existing resource handling in the driver with managed
device resource, this ensures more consistent error values and
simplifies error paths.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
drivers/mmc/host/mxcmmc.c | 101 +++++++++++++++++-----------------------------
1 file changed, 38 insertions(+), 63 deletions(-)
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
index f7199c8..84d630e 100644
--- a/drivers/mmc/host/mxcmmc.c
+++ b/drivers/mmc/host/mxcmmc.c
@@ -124,9 +124,8 @@ enum mxcmci_type {
struct mxcmci_host {
struct mmc_host *mmc;
- struct resource *res;
void __iomem *base;
- int irq;
+ dma_addr_t phys_base;
int detect_irq;
struct dma_chan *dma;
struct dma_async_tx_descriptor *desc;
@@ -241,33 +240,26 @@ static inline void mxcmci_writew(struct mxcmci_host *host, u16 val, int reg)
static void mxcmci_set_clk_rate(struct mxcmci_host *host, unsigned int clk_ios);
-static inline void mxcmci_init_ocr(struct mxcmci_host *host)
+static void mxcmci_init_ocr(struct mxcmci_host *host)
{
- host->vcc = regulator_get(mmc_dev(host->mmc), "vmmc");
-
+ host->vcc = devm_regulator_get(mmc_dev(host->mmc), "vmmc");
if (IS_ERR(host->vcc)) {
- host->vcc = NULL;
+ if (host->pdata && host->pdata->ocr_avail)
+ host->mmc->ocr_avail = host->pdata->ocr_avail;
+ else
+ host->mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
} else {
host->mmc->ocr_avail = mmc_regulator_get_ocrmask(host->vcc);
if (host->pdata && host->pdata->ocr_avail)
dev_warn(mmc_dev(host->mmc),
"pdata->ocr_avail will not be used\n");
}
-
- if (host->vcc == NULL) {
- /* fall-back to platform data */
- if (host->pdata && host->pdata->ocr_avail)
- host->mmc->ocr_avail = host->pdata->ocr_avail;
- else
- host->mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
- }
}
-static inline void mxcmci_set_power(struct mxcmci_host *host,
- unsigned char power_mode,
- unsigned int vdd)
+static void mxcmci_set_power(struct mxcmci_host *host, unsigned char power_mode,
+ unsigned int vdd)
{
- if (host->vcc) {
+ if (!IS_ERR(host->vcc)) {
if (power_mode == MMC_POWER_UP)
mmc_regulator_set_ocr(host->mmc, host->vcc, vdd);
else if (power_mode == MMC_POWER_OFF)
@@ -299,7 +291,6 @@ static void mxcmci_softreset(struct mxcmci_host *host)
mxcmci_writew(host, 0xff, MMC_REG_RES_TO);
}
-static int mxcmci_setup_dma(struct mmc_host *mmc);
#if IS_ENABLED(CONFIG_PPC_MPC512x)
static inline void buffer_swap32(u32 *buf, int len)
@@ -868,8 +859,8 @@ static int mxcmci_setup_dma(struct mmc_host *mmc)
struct mxcmci_host *host = mmc_priv(mmc);
struct dma_slave_config *config = &host->dma_slave_config;
- config->dst_addr = host->res->start + MMC_REG_BUFFER_ACCESS;
- config->src_addr = host->res->start + MMC_REG_BUFFER_ACCESS;
+ config->dst_addr = host->phys_base + MMC_REG_BUFFER_ACCESS;
+ config->src_addr = host->phys_base + MMC_REG_BUFFER_ACCESS;
config->dst_addr_width = 4;
config->src_addr_width = 4;
config->dst_maxburst = host->burstlen;
@@ -1040,8 +1031,8 @@ static const struct mmc_host_ops mxcmci_ops = {
static int mxcmci_probe(struct platform_device *pdev)
{
struct mmc_host *mmc;
- struct mxcmci_host *host = NULL;
- struct resource *iores, *r;
+ struct mxcmci_host *host;
+ struct resource *res;
int ret = 0, irq;
bool dat3_card_detect = false;
dma_cap_mask_t mask;
@@ -1052,21 +1043,25 @@ static int mxcmci_probe(struct platform_device *pdev)
of_id = of_match_device(mxcmci_of_match, &pdev->dev);
- iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq = platform_get_irq(pdev, 0);
- if (!iores || irq < 0)
+ if (irq < 0)
return -EINVAL;
- r = request_mem_region(iores->start, resource_size(iores), pdev->name);
- if (!r)
- return -EBUSY;
+ mmc = mmc_alloc_host(sizeof(*host), &pdev->dev);
+ if (!mmc)
+ return -ENOMEM;
- mmc = mmc_alloc_host(sizeof(struct mxcmci_host), &pdev->dev);
- if (!mmc) {
- ret = -ENOMEM;
- goto out_release_mem;
+ host = mmc_priv(mmc);
+
+ host->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(host->base)) {
+ ret = PTR_ERR(host->base);
+ goto out_free;
}
+ host->phys_base = res->start;
+
ret = mmc_of_parse(mmc);
if (ret)
goto out_free;
@@ -1084,13 +1079,6 @@ static int mxcmci_probe(struct platform_device *pdev)
mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
mmc->max_seg_size = mmc->max_req_size;
- host = mmc_priv(mmc);
- host->base = ioremap(r->start, resource_size(r));
- if (!host->base) {
- ret = -ENOMEM;
- goto out_free;
- }
-
if (of_id) {
const struct platform_device_id *id_entry = of_id->data;
host->devtype = id_entry->driver_data;
@@ -1120,19 +1108,16 @@ static int mxcmci_probe(struct platform_device *pdev)
else
host->default_irq_mask = 0;
- host->res = r;
- host->irq = irq;
-
host->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
if (IS_ERR(host->clk_ipg)) {
ret = PTR_ERR(host->clk_ipg);
- goto out_iounmap;
+ goto out_free;
}
host->clk_per = devm_clk_get(&pdev->dev, "per");
if (IS_ERR(host->clk_per)) {
ret = PTR_ERR(host->clk_per);
- goto out_iounmap;
+ goto out_free;
}
clk_prepare_enable(host->clk_per);
@@ -1159,9 +1144,9 @@ static int mxcmci_probe(struct platform_device *pdev)
if (!host->pdata) {
host->dma = dma_request_slave_channel(&pdev->dev, "rx-tx");
} else {
- r = platform_get_resource(pdev, IORESOURCE_DMA, 0);
- if (r) {
- host->dmareq = r->start;
+ res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+ if (res) {
+ host->dmareq = res->start;
host->dma_data.peripheral_type = IMX_DMATYPE_SDHC;
host->dma_data.priority = DMA_PRIO_LOW;
host->dma_data.dma_request = host->dmareq;
@@ -1178,7 +1163,8 @@ static int mxcmci_probe(struct platform_device *pdev)
INIT_WORK(&host->datawork, mxcmci_datawork);
- ret = request_irq(host->irq, mxcmci_irq, 0, DRIVER_NAME, host);
+ ret = devm_request_irq(&pdev->dev, irq, mxcmci_irq, 0,
+ dev_name(&pdev->dev), host);
if (ret)
goto out_free_dma;
@@ -1188,7 +1174,7 @@ static int mxcmci_probe(struct platform_device *pdev)
ret = host->pdata->init(&pdev->dev, mxcmci_detect_irq,
host->mmc);
if (ret)
- goto out_free_irq;
+ goto out_free_dma;
}
init_timer(&host->watchdog);
@@ -1199,20 +1185,17 @@ static int mxcmci_probe(struct platform_device *pdev)
return 0;
-out_free_irq:
- free_irq(host->irq, host);
out_free_dma:
if (host->dma)
dma_release_channel(host->dma);
+
out_clk_put:
clk_disable_unprepare(host->clk_per);
clk_disable_unprepare(host->clk_ipg);
-out_iounmap:
- iounmap(host->base);
+
out_free:
mmc_free_host(mmc);
-out_release_mem:
- release_mem_region(iores->start, resource_size(iores));
+
return ret;
}
@@ -1223,23 +1206,15 @@ static int mxcmci_remove(struct platform_device *pdev)
mmc_remove_host(mmc);
- if (host->vcc)
- regulator_put(host->vcc);
-
if (host->pdata && host->pdata->exit)
host->pdata->exit(&pdev->dev, mmc);
- free_irq(host->irq, host);
- iounmap(host->base);
-
if (host->dma)
dma_release_channel(host->dma);
clk_disable_unprepare(host->clk_per);
clk_disable_unprepare(host->clk_ipg);
- release_mem_region(host->res->start, resource_size(host->res));
-
mmc_free_host(mmc);
return 0;
--
1.8.3.2
next reply other threads:[~2014-02-22 14:46 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-22 14:46 Alexander Shiyan [this message]
2014-02-22 14:46 ` [PATCH 2/2] mmc: mxcmmc: Convert to SIMPLE_DEV_PM_OPS Alexander Shiyan
2014-02-22 14:51 ` Fabio Estevam
2014-02-22 14:57 ` Alexander Shiyan
2014-02-22 14:59 ` Fabio Estevam
2014-02-22 15:02 ` Alexander Shiyan
2014-02-22 15:05 ` Fabio Estevam
2014-02-22 15:42 ` Arnd Bergmann
2014-02-22 15:37 ` [PATCH 1/2] mmc: mxcmmc: Convert to devm-* API Arnd Bergmann
2014-02-22 16:02 ` Alexander Shiyan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1393080372-6760-1-git-send-email-shc_work@mail.ru \
--to=shc_work@mail.ru \
--cc=chris@printf.net \
--cc=kernel@pengutronix.de \
--cc=linux-mmc@vger.kernel.org \
--cc=shawn.guo@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox