From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marek Belisko Subject: [PATCH 2/2] Documentation: devicetree: mmc: Document reset-gpio property Date: Thu, 3 Jul 2014 22:49:24 +0200 Message-ID: <1404420564-30245-2-git-send-email-marek@goldelico.com> References: <1404420564-30245-1-git-send-email-marek@goldelico.com> Return-path: In-Reply-To: <1404420564-30245-1-git-send-email-marek@goldelico.com> Sender: linux-kernel-owner@vger.kernel.org To: robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com, ijc+devicetree@hellion.org.uk, galak@codeaurora.org, tony@atomide.com, linux@arm.linux.org.uk, balajitk@ti.com, chris@printf.net, ulf.hansson@linaro.org Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-mmc@vger.kernel.org, hns@goldelico.com, marek@goldelico.com List-Id: linux-mmc@vger.kernel.org Signed-off-by: Marek Belisko --- Documentation/devicetree/bindings/mmc/mmc.txt | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt index 431716e..b094bd2 100644 --- a/Documentation/devicetree/bindings/mmc/mmc.txt +++ b/Documentation/devicetree/bindings/mmc/mmc.txt @@ -21,6 +21,7 @@ Optional properties: below for the case, when a GPIO is used for the CD line - wp-inverted: when present, polarity on the WP line is inverted. See the note below for the case, when a GPIO is used for the WP line +- reset-gpios: Specify GPIOs which will be hold down when turning power regulator - max-frequency: maximum operating clock frequency - no-1-8-v: when present, denotes that 1.8v card voltage is not supported on this system, even if the controller claims it is. @@ -72,6 +73,7 @@ sdhci@ab000000 { cd-gpios = <&gpio 69 0>; cd-inverted; wp-gpios = <&gpio 70 0>; + reset-gpios = <&gpio 71 0>; max-frequency = <50000000>; keep-power-in-suspend; enable-sdio-wakeup; -- 1.9.1