public inbox for linux-mmc@vger.kernel.org
 help / color / mirror / Atom feed
From: Addy Ke <addy.ke@rock-chips.com>
To: robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com,
	ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
	rdunlap@infradead.org, tgih.jun@samsung.com,
	jh80.chung@samsung.com, chris@printf.net, ulf.hansson@linaro.org,
	dinguyen@altera.com, heiko@sntech.de, olof@lixom.net,
	dianders@chromium.org
Cc: devicetree@vger.kernel.org, linux-doc@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-mmc@vger.kernel.org,
	zhenfu.fang@rock-chips.com, cf@rock-chips.com,
	lintao@rock-chips.com, chenfen@rock-chips.com,
	zyf@rock-chips.com, xjq@rock-chips.com, huangtao@rock-chips.com,
	zyw@rock-chips.com, yzq@rock-chips.com, hj@rock-chips.com,
	kever.yang@rock-chips.com, zhangqing@rock-chips.com,
	hl@rock-chips.com, Addy Ke <addy.ke@rock-chips.com>
Subject: [PATCH] mmc: dw_mmc: add support for RK3288
Date: Thu, 31 Jul 2014 14:01:38 +0800	[thread overview]
Message-ID: <1406786498-3935-1-git-send-email-addy.ke@rock-chips.com> (raw)
In-Reply-To: <1404963109-3906-1-git-send-email-addy.ke@rock-chips.com>

This patch focuses on clock setting for RK3288 mmc controller.

In RK3288 mmc controller, CLKDIV register can only be set 0 or 1,
and if DDR 8bit mode, CLKDIV register must be set 1.

Reported-by Doug Anderson <dianders@chromium.org>
Suggested-by: Jaehoon Chung <jh80.chung@samsung.com>
Suggested-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Addy Ke <addy.ke@rock-chips.com>
---
changes since v1:
- dw_mci_rk3288_setup_clock: do not call clk_get_rate(), just use the
  host->bus_hz which is already called by dw_mmc.c, suggested by Jaehoon Chung

changes since v2:
- merge from ChromiumOS tree, fix up clock settting bug, 
  which cause DDR50 mode for emmc not to work, reported by Doug Anderson
- remove MMC_TIMING_UHS_DDR50 condition, because on RK3288 only emmc can work
  in 8bit mode, suggested by Doug Anderson

 .../devicetree/bindings/mmc/rockchip-dw-mshc.txt   |  6 ++-
 drivers/mmc/host/dw_mmc-pltfm.c                    | 56 +++++++++++++++++++++-
 2 files changed, 58 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt
index c559f3f..c327c2d 100644
--- a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt
@@ -10,12 +10,14 @@ extensions to the Synopsys Designware Mobile Storage Host Controller.
 Required Properties:
 
 * compatible: should be
-	- "rockchip,rk2928-dw-mshc": for Rockchip RK2928 and following
+	- "rockchip,rk2928-dw-mshc": for Rockchip RK2928 and following,
+							before RK3288
+	- "rockchip,rk3288-dw-mshc": for Rockchip RK3288
 
 Example:
 
 	rkdwmmc0@12200000 {
-		compatible = "rockchip,rk2928-dw-mshc";
+		compatible = "rockchip,rk3288-dw-mshc";
 		reg = <0x12200000 0x1000>;
 		interrupts = <0 75 0>;
 		#address-cells = <1>;
diff --git a/drivers/mmc/host/dw_mmc-pltfm.c b/drivers/mmc/host/dw_mmc-pltfm.c
index d4a47a9..b547f7a 100644
--- a/drivers/mmc/host/dw_mmc-pltfm.c
+++ b/drivers/mmc/host/dw_mmc-pltfm.c
@@ -21,17 +21,67 @@
 #include <linux/mmc/mmc.h>
 #include <linux/mmc/dw_mmc.h>
 #include <linux/of.h>
+#include <linux/clk.h>
 
 #include "dw_mmc.h"
 #include "dw_mmc-pltfm.h"
 
+#define RK3288_CLKGEN_DIV	2
+
 static void dw_mci_pltfm_prepare_command(struct dw_mci *host, u32 *cmdr)
 {
 	*cmdr |= SDMMC_CMD_USE_HOLD_REG;
 }
 
-static const struct dw_mci_drv_data rockchip_drv_data = {
+static int dw_mci_rk3288_setup_clock(struct dw_mci *host)
+{
+	host->bus_hz /= RK3288_CLKGEN_DIV;
+
+	return 0;
+}
+
+static void dw_mci_rk3288_set_ios(struct dw_mci *host, struct mmc_ios *ios)
+{
+	int ret;
+	unsigned int cclkin;
+	u32 bus_hz;
+
+	/*
+	 * cclkin: source clock of mmc controller.
+	 * bus_hz: card interface clock generated by CLKGEN.
+	 * bus_hz = cclkin / RK3288_CLKGEN_DIV;
+	 * ios->clock = (div == 0) ? bus_hz : (bus_hz / (2 * div))
+	 *
+	 * Note: div can only be 0 or 1
+	 *       if DDR50 8bit mode(only emmc work in 8bit mode),
+	 *       div must be set 1
+	 */
+	if ((ios->bus_width == MMC_BUS_WIDTH_8) &&
+	    (ios->timing == MMC_TIMING_MMC_DDR52))
+		cclkin = 2 * ios->clock * RK3288_CLKGEN_DIV;
+	else
+		cclkin = ios->clock * RK3288_CLKGEN_DIV;
+
+	ret = clk_set_rate(host->ciu_clk, cclkin);
+	if (ret)
+		dev_warn(host->dev, "failed to set rate %uHz\n", ios->clock);
+
+	bus_hz = clk_get_rate(host->ciu_clk) / RK3288_CLKGEN_DIV;
+	if (bus_hz != host->bus_hz) {
+		host->bus_hz = bus_hz;
+		/* force dw_mci_setup_bus() */
+		host->current_speed = 0;
+	}
+}
+
+static const struct dw_mci_drv_data rk2928_drv_data = {
+	.prepare_command	= dw_mci_pltfm_prepare_command,
+};
+
+static const struct dw_mci_drv_data rk3288_drv_data = {
 	.prepare_command	= dw_mci_pltfm_prepare_command,
+	.set_ios	= dw_mci_rk3288_set_ios,
+	.setup_clock	= dw_mci_rk3288_setup_clock,
 };
 
 static const struct dw_mci_drv_data socfpga_drv_data = {
@@ -95,7 +145,9 @@ EXPORT_SYMBOL_GPL(dw_mci_pltfm_pmops);
 static const struct of_device_id dw_mci_pltfm_match[] = {
 	{ .compatible = "snps,dw-mshc", },
 	{ .compatible = "rockchip,rk2928-dw-mshc",
-		.data = &rockchip_drv_data },
+		.data = &rk2928_drv_data },
+	{ .compatible = "rockchip,rk3288-dw-mshc",
+		.data = &rk3288_drv_data },
 	{ .compatible = "altr,socfpga-dw-mshc",
 		.data = &socfpga_drv_data },
 	{},
-- 
1.8.3.2



  parent reply	other threads:[~2014-07-31  6:02 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-07-05 12:59 [PATCH] mmc: dw_mmc: add support for RK3288 addy ke
2014-07-07  2:07 ` Jaehoon Chung
2014-07-07  2:42   ` addy ke
2014-07-10  3:31 ` [PATCH v2] " Addy Ke
2014-07-29  4:52   ` Doug Anderson
2014-07-29 16:38     ` Doug Anderson
2014-07-31  6:01   ` Addy Ke [this message]
2014-08-07  8:47     ` [PATCH] " Jaehoon Chung
     [not found]     ` <1406786498-3935-1-git-send-email-addy.ke-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2014-08-14  8:01       ` [PATCH] mmc: dw_mmc: move rockchip related code to a separate file Addy Ke
2014-08-14 12:16         ` Bartlomiej Zolnierkiewicz
2014-08-19  4:36         ` [PATCH v2] " Addy Ke
2014-08-19  5:08           ` Jaehoon Chung
2014-08-19 17:28           ` Doug Anderson
2014-08-29 11:05             ` Ulf Hansson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1406786498-3935-1-git-send-email-addy.ke@rock-chips.com \
    --to=addy.ke@rock-chips.com \
    --cc=cf@rock-chips.com \
    --cc=chenfen@rock-chips.com \
    --cc=chris@printf.net \
    --cc=devicetree@vger.kernel.org \
    --cc=dianders@chromium.org \
    --cc=dinguyen@altera.com \
    --cc=galak@codeaurora.org \
    --cc=heiko@sntech.de \
    --cc=hj@rock-chips.com \
    --cc=hl@rock-chips.com \
    --cc=huangtao@rock-chips.com \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=jh80.chung@samsung.com \
    --cc=kever.yang@rock-chips.com \
    --cc=lintao@rock-chips.com \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=olof@lixom.net \
    --cc=pawel.moll@arm.com \
    --cc=rdunlap@infradead.org \
    --cc=robh+dt@kernel.org \
    --cc=tgih.jun@samsung.com \
    --cc=ulf.hansson@linaro.org \
    --cc=xjq@rock-chips.com \
    --cc=yzq@rock-chips.com \
    --cc=zhangqing@rock-chips.com \
    --cc=zhenfu.fang@rock-chips.com \
    --cc=zyf@rock-chips.com \
    --cc=zyw@rock-chips.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox