From: Yunpeng Gao <yunpeng.gao@intel.com>
To: linux-mmc@vger.kernel.org
Cc: Yunpeng Gao <yunpeng.gao@intel.com>,
Chuanxiao Dong <chuanxiao.dong@intel.com>
Subject: [PATCH] mmc: sdhci-acpi: add probe_slot method for emmc/sd/sdio
Date: Tue, 26 Aug 2014 20:00:55 +0800 [thread overview]
Message-ID: <1409054455-7782-1-git-send-email-yunpeng.gao@intel.com> (raw)
Similar to sdhci-pci controller, also add probe_slot
and remove_slot method in the sdhci-acpi driver.
Signed-off-by: Yunpeng Gao <yunpeng.gao@intel.com>
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
---
drivers/mmc/host/sdhci-acpi.c | 58 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 58 insertions(+)
diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c
index 8ce3c28..93dabf7 100644
--- a/drivers/mmc/host/sdhci-acpi.c
+++ b/drivers/mmc/host/sdhci-acpi.c
@@ -67,6 +67,8 @@ struct sdhci_acpi_slot {
unsigned int caps2;
mmc_pm_flag_t pm_caps;
unsigned int flags;
+ int (*probe_slot) (struct platform_device *);
+ int (*remove_slot) (struct platform_device *);
};
struct sdhci_acpi_host {
@@ -122,11 +124,57 @@ static const struct sdhci_acpi_chip sdhci_acpi_chip_int = {
.ops = &sdhci_acpi_ops_int,
};
+static int sdhci_acpi_emmc_probe_slot(struct platform_device *pdev)
+{
+ struct sdhci_acpi_host *c = platform_get_drvdata(pdev);
+ struct sdhci_host *host;
+
+ if (!c || !c->host)
+ return 0;
+
+ host = c->host;
+
+ /* Platform specific code during emmc proble slot goes here */
+
+ return 0;
+}
+
+static int sdhci_acpi_sdio_probe_slot(struct platform_device *pdev)
+{
+ struct sdhci_acpi_host *c = platform_get_drvdata(pdev);
+ struct sdhci_host *host;
+
+ if (!c || !c->host)
+ return 0;
+
+ host = c->host;
+
+ /* Platform specific code during emmc proble slot goes here */
+
+ return 0;
+}
+
+static int sdhci_acpi_sd_probe_slot(struct platform_device *pdev)
+{
+ struct sdhci_acpi_host *c = platform_get_drvdata(pdev);
+ struct sdhci_host *host;
+
+ if (!c || !c->host || !c->slot)
+ return 0;
+
+ host = c->host;
+
+ /* Platform specific code during emmc proble slot goes here */
+
+ return 0;
+}
+
static const struct sdhci_acpi_slot sdhci_acpi_slot_int_emmc = {
.chip = &sdhci_acpi_chip_int,
.caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE | MMC_CAP_HW_RESET,
.caps2 = MMC_CAP2_HC_ERASE_SZ,
.flags = SDHCI_ACPI_RUNTIME_PM,
+ .probe_slot = sdhci_acpi_emmc_probe_slot,
};
static const struct sdhci_acpi_slot sdhci_acpi_slot_int_sdio = {
@@ -135,12 +183,14 @@ static const struct sdhci_acpi_slot sdhci_acpi_slot_int_sdio = {
.caps = MMC_CAP_NONREMOVABLE | MMC_CAP_POWER_OFF_CARD,
.flags = SDHCI_ACPI_RUNTIME_PM,
.pm_caps = MMC_PM_KEEP_POWER,
+ .probe_slot = sdhci_acpi_sdio_probe_slot,
};
static const struct sdhci_acpi_slot sdhci_acpi_slot_int_sd = {
.flags = SDHCI_ACPI_SD_CD | SDHCI_ACPI_SD_CD_OVERRIDE_LEVEL |
SDHCI_ACPI_RUNTIME_PM,
.quirks2 = SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON,
+ .probe_slot = sdhci_acpi_sd_probe_slot,
};
struct sdhci_acpi_uid_slot {
@@ -275,6 +325,11 @@ static int sdhci_acpi_probe(struct platform_device *pdev)
}
if (c->slot) {
+ if (c->slot->probe_slot) {
+ err = c->slot->probe_slot(pdev);
+ if (err)
+ goto err_free;
+ }
if (c->slot->chip) {
host->ops = c->slot->chip->ops;
host->quirks |= c->slot->chip->quirks;
@@ -332,6 +387,9 @@ static int sdhci_acpi_remove(struct platform_device *pdev)
pm_runtime_put_noidle(dev);
}
+ if (c->slot && c->slot->remove_slot)
+ c->slot->remove_slot(pdev);
+
dead = (sdhci_readl(c->host, SDHCI_INT_STATUS) == ~0);
sdhci_remove_host(c->host, dead);
sdhci_free_host(c->host);
--
1.7.9.5
next reply other threads:[~2014-08-26 11:59 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-26 12:00 Yunpeng Gao [this message]
2014-08-29 12:03 ` [PATCH] mmc: sdhci-acpi: add probe_slot method for emmc/sd/sdio Ulf Hansson
2014-09-01 3:17 ` Gao, Yunpeng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1409054455-7782-1-git-send-email-yunpeng.gao@intel.com \
--to=yunpeng.gao@intel.com \
--cc=chuanxiao.dong@intel.com \
--cc=linux-mmc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).