[PATCH 7/7] mmc: sdhci-pci: Fix Braswell eMMC timeout clock frequency

Adrian Hunter
2014-09-24T07:38:13Z

Braswell eMMC host controller specifies an incorrect
timeout clock frequncy in the capabilities registers.
The correct value is 1 MHz.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
---
drivers/mmc/host/sdhci-pci.c | 2 ++
1 file changed, 2 insertions(+)

diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index 39499fb..9e791e9 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -272,6 +272,8 @@ static int byt_emmc_probe_slot(struct sdhci_pci_slot *slot)
MMC_CAP_HW_RESET | MMC_CAP_1_8V_DDR;
slot->host->mmc->caps2 |= MMC_CAP2_HC_ERASE_SZ;
slot->hw_reset = sdhci_pci_int_hw_reset;
+ if (slot->chip->pdev->device == PCI_DEVICE_ID_INTEL_BSW_EMMC)
+ slot->host->timeout_clk = 1000; /* 1000 kHz i.e. 1 MHz */
return 0;
}

--
1.8.3.2