From: Adrian Hunter <adrian.hunter@intel.com>
To: Ulf Hansson <ulf.hansson@linaro.org>, Chris Ball <chris@printf.net>
Cc: linux-mmc <linux-mmc@vger.kernel.org>
Subject: [PATCH 10/15] mmc: sdhci: Define ADMA constants
Date: Tue, 21 Oct 2014 12:26:20 +0300 [thread overview]
Message-ID: <1413883585-16299-11-git-send-email-adrian.hunter@intel.com> (raw)
In-Reply-To: <1413883585-16299-1-git-send-email-adrian.hunter@intel.com>
Define all the ADMA constants instead of having numbers
scattered throughout the code.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
---
drivers/mmc/host/sdhci.c | 23 +++++++++++++----------
drivers/mmc/host/sdhci.h | 10 ++++++++++
2 files changed, 23 insertions(+), 10 deletions(-)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index ea0ba95..5dd5408 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -464,7 +464,7 @@ static void sdhci_adma_mark_end(void *desc)
{
u8 *dma_desc = desc;
- dma_desc[0] |= 0x2; /* end */
+ dma_desc[0] |= ADMA2_END;
}
static int sdhci_adma_table_pre(struct sdhci_host *host,
@@ -532,7 +532,8 @@ static int sdhci_adma_table_pre(struct sdhci_host *host,
}
/* tran, valid */
- sdhci_adma_write_desc(desc, align_addr, offset, 0x21);
+ sdhci_adma_write_desc(desc, align_addr, offset,
+ ADMA2_TRAN_VALID);
BUG_ON(offset > 65536);
@@ -548,7 +549,7 @@ static int sdhci_adma_table_pre(struct sdhci_host *host,
BUG_ON(len > 65536);
/* tran, valid */
- sdhci_adma_write_desc(desc, addr, len, 0x21);
+ sdhci_adma_write_desc(desc, addr, len, ADMA2_TRAN_VALID);
desc += host->desc_sz;
/*
@@ -572,7 +573,7 @@ static int sdhci_adma_table_pre(struct sdhci_host *host,
*/
/* nop, end, valid */
- sdhci_adma_write_desc(desc, 0, 0, 0x3);
+ sdhci_adma_write_desc(desc, 0, 0, ADMA2_NOP_END_VALID);
}
/*
@@ -2311,7 +2312,7 @@ static void sdhci_adma_show_error(struct sdhci_host *host)
desc += host->desc_sz;
- if (attr & 2)
+ if (attr & ADMA2_END)
break;
}
}
@@ -2876,11 +2877,13 @@ int sdhci_add_host(struct sdhci_host *host)
* descriptor for each segment, plus 1 for a nop end descriptor,
* all multipled by the descriptor size.
*/
- host->adma_table_sz = (SDHCI_MAX_SEGS * 2 + 1) * 8;
- host->align_buffer_sz = SDHCI_MAX_SEGS * 4;
- host->desc_sz = 8;
- host->align_sz = 4;
- host->align_mask = 3;
+ host->adma_table_sz = (SDHCI_MAX_SEGS * 2 + 1) *
+ SDHCI_ADMA2_32_DESC_SZ;
+ host->align_buffer_sz = SDHCI_MAX_SEGS *
+ SDHCI_ADMA2_32_ALIGN;
+ host->desc_sz = SDHCI_ADMA2_32_DESC_SZ;
+ host->align_sz = SDHCI_ADMA2_32_ALIGN;
+ host->align_mask = SDHCI_ADMA2_32_ALIGN - 1;
host->adma_table = dma_alloc_coherent(mmc_dev(mmc),
host->adma_table_sz,
&host->adma_addr,
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 6ae75cd..823cce1 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -266,6 +266,16 @@
#define SDHCI_DEFAULT_BOUNDARY_SIZE (512 * 1024)
#define SDHCI_DEFAULT_BOUNDARY_ARG (ilog2(SDHCI_DEFAULT_BOUNDARY_SIZE) - 12)
+/* ADMA2 32-bit DMA descriptor size */
+#define SDHCI_ADMA2_32_DESC_SZ 8
+
+/* ADMA2 32-bit DMA alignment */
+#define SDHCI_ADMA2_32_ALIGN 4
+
+#define ADMA2_TRAN_VALID 0x21
+#define ADMA2_NOP_END_VALID 0x3
+#define ADMA2_END 0x2
+
/*
* Maximum segments assuming a 512KiB maximum requisition size and a minimum
* 4KiB page size.
--
1.9.1
next prev parent reply other threads:[~2014-10-21 9:28 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-21 9:26 [PATCH 00/15] mmc: sdhci: Add 64-bit ADMA support Adrian Hunter
2014-10-21 9:26 ` [PATCH 01/15] mmc: sdhci: Fix incorrect ADMA2 descriptor table size Adrian Hunter
2014-10-21 9:26 ` [PATCH 02/15] mmc: sdhci: Fix ADMA page boundary warnings Adrian Hunter
2014-10-21 9:26 ` [PATCH 03/15] mmc: sdhci: Fix ADMA table size warning Adrian Hunter
2014-10-21 9:26 ` [PATCH 04/15] mmc: sdhci: Rename two ADMA-related functions for consistency Adrian Hunter
2014-10-21 9:26 ` [PATCH 05/15] mmc: sdhci: Rename adma_desc to adma_table Adrian Hunter
2014-10-21 9:26 ` [PATCH 06/15] mmc: sdhci: Add sdhci_adma_mark_end() Adrian Hunter
2014-10-21 9:26 ` [PATCH 07/15] mmc: sdhci: Use 'void *' for not 'u8 *' for ADMA data Adrian Hunter
2014-10-21 9:26 ` [PATCH 08/15] mmc: sdhci: Parameterize ADMA sizes and alignment Adrian Hunter
2014-10-21 9:26 ` [PATCH 09/15] mmc: sdhci: Define maximum segments Adrian Hunter
2014-10-21 9:26 ` Adrian Hunter [this message]
2014-10-21 9:26 ` [PATCH 11/15] mmc: sdhci: Define ADMA descriptor structure Adrian Hunter
2014-10-21 9:26 ` [PATCH 12/15] mmc: sdhci: Add 64-bit ADMA support Adrian Hunter
2014-10-21 9:26 ` [PATCH 13/15] mmc: sdhci-acpi: Add 64-bit DMA support Adrian Hunter
2014-10-21 9:33 ` Arnd Bergmann
2014-10-21 10:45 ` Adrian Hunter
2014-10-21 11:05 ` Arnd Bergmann
2014-10-28 8:37 ` [PATCH V2] " Adrian Hunter
2014-10-28 9:43 ` Arnd Bergmann
2014-10-28 10:05 ` Adrian Hunter
2014-10-28 10:18 ` Arnd Bergmann
2014-10-28 11:41 ` Adrian Hunter
2014-10-28 13:54 ` Arnd Bergmann
2014-10-28 14:14 ` Adrian Hunter
2014-10-28 15:08 ` Arnd Bergmann
2014-10-28 15:14 ` Adrian Hunter
2014-10-28 15:38 ` Arnd Bergmann
2014-10-29 8:53 ` Adrian Hunter
2014-10-21 9:26 ` [PATCH 14/15] mmc: sdhci-pci: " Adrian Hunter
2014-10-21 9:26 ` [PATCH 15/15] mmc: mmc_test: Extend "Badly aligned" tests for 8-byte alignment Adrian Hunter
2014-10-30 7:25 ` [PATCH 00/15] mmc: sdhci: Add 64-bit ADMA support Adrian Hunter
2014-10-30 8:05 ` Arnd Bergmann
2014-10-30 8:40 ` Adrian Hunter
2014-10-30 10:00 ` Arnd Bergmann
2014-10-30 10:50 ` Adrian Hunter
2014-10-30 12:15 ` Arnd Bergmann
2014-10-30 12:55 ` Adrian Hunter
2014-11-03 8:28 ` Adrian Hunter
2014-11-03 14:40 ` Ulf Hansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1413883585-16299-11-git-send-email-adrian.hunter@intel.com \
--to=adrian.hunter@intel.com \
--cc=chris@printf.net \
--cc=linux-mmc@vger.kernel.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox