[PATCH v5 0/2] mmc: core: hw_reset changes

[Johan Rudholm <johan.rudholm@axis.com>]

Make the mmc_hw_reset routines more generic, by putting the (e)MMC-
specific stuff in the new bus_ops->hw_reset. Simplify them by putting
the functionality required by the mmc_test framework in mmc_test.c

As I don't have an eMMC device myself, much less one with a reset line,
I'd be very happy if someone could help me test the code with an eMMC?

v5:
 - Move the mmc_test-specific code to mmc_test.c
 - Fall back to a power_cycle if the bus_ops->hw_reset is missing
 - Because of this, skip the bus_ops->hw_reset in sd.c

v4:
 - Rebase onto next

v3:
 - Keep mmc_can_reset
 - Always set bus_mode = MMC_BUSMODE_PUSHPULL in mmc_set_initial_state()

v2:
 - Call the new bus_ops member hw_reset instead of power_reset
 - Create mmc_set_initial_state and call it from mmc_mmc_hw_reset
   instead of mmc_power_up
 - Keep "mmc_hw_reset" naming

Johan Rudholm (2):
  mmc: core: refactor the hw_reset routines
  mmc: core: let hw_reset default to power_cycle

 drivers/mmc/card/mmc_test.c |   24 +++++++++-----
 drivers/mmc/core/core.c     |   70 ++++++++++++++++--------------------------
 drivers/mmc/core/core.h     |    2 +-
 drivers/mmc/core/mmc.c      |   23 ++++++++++++++
 drivers/mmc/core/mmc_ops.c  |    1 +
 drivers/mmc/core/mmc_ops.h  |    1 -
 include/linux/mmc/core.h    |    5 ++-
 7 files changed, 70 insertions(+), 56 deletions(-)

-- 
1.7.2.5