From: Adrian Hunter <adrian.hunter@intel.com>
To: Ulf Hansson <ulf.hansson@linaro.org>, Chris Ball <chris@printf.net>
Cc: linux-mmc <linux-mmc@vger.kernel.org>,
Aaron Lu <aaron.lu@intel.com>, Philip Rakity <prakity@nvidia.com>,
Girish K S <girish.shivananjappa@linaro.org>,
Al Cooper <alcooperx@gmail.com>,
Arend van Spriel <arend@broadcom.com>
Subject: [PATCH 02/13] mmc: host: Add facility to support re-tuning
Date: Fri, 5 Dec 2014 19:41:00 +0200 [thread overview]
Message-ID: <1417801271-15575-3-git-send-email-adrian.hunter@intel.com> (raw)
In-Reply-To: <1417801271-15575-1-git-send-email-adrian.hunter@intel.com>
Currently, there is core support for tuning during
initialization. There can also be a need to re-tune
periodically (e.g. sdhci) or to re-tune after the
host controller is powered off (e.g. after PM
runtime suspend / resume) or to re-tune in response
to CRC errors.
The main requirements for re-tuning are:
- ability to enable /disable re-tuning
- ability to flag that re-tuning is needed
- ability to re-tune before any request
- ability to hold off re-tuning if the card is busy
- ability to hold off re-tuning if re-tuning is in
progress
- ability to run a re-tuning timer
To support those requirements 5 members are added to struct
mmc_host:
unsigned int can_retune:1; /* re-tuning can be used */
unsigned int doing_retune:1; /* re-tuning in progress */
int need_retune; /* re-tuning is needed */
int hold_retune; /* hold off re-tuning */
struct timer_list retune_timer; /* for periodic re-tuning */
need_retune is an integer so it can be set without needing
synchronization. hold_retune is a integer to allow nesting.
Various simple functions are provided to set / clear those
variables.
Subsequent patches take those functions into use.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
---
drivers/mmc/core/host.c | 46 ++++++++++++++++++++++++++++++++++++++
include/linux/mmc/host.h | 58 ++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 104 insertions(+)
diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index 270d58a..a4aa25b 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -297,6 +297,51 @@ static inline void mmc_host_clk_sysfs_init(struct mmc_host *host)
#endif
+void mmc_retune_enable(struct mmc_host *host, unsigned int period)
+{
+ host->can_retune = 1;
+ if (period)
+ mod_timer(&host->retune_timer, jiffies + period * HZ);
+}
+
+void mmc_retune_disable(struct mmc_host *host)
+{
+ host->can_retune = 0;
+ del_timer_sync(&host->retune_timer);
+ host->need_retune = 0;
+}
+
+void mmc_retune_timer_stop(struct mmc_host *host)
+{
+ del_timer_sync(&host->retune_timer);
+}
+
+int mmc_retune(struct mmc_host *host)
+{
+ int err;
+
+ if (!host->need_retune || host->doing_retune || host->hold_retune ||
+ !host->card)
+ return 0;
+
+ host->need_retune = 0;
+
+ host->doing_retune = 1;
+
+ err = mmc_execute_tuning(host->card);
+
+ host->doing_retune = 0;
+
+ return err;
+}
+
+static void mmc_retune_timer(unsigned long data)
+{
+ struct mmc_host *host = (struct mmc_host *)data;
+
+ mmc_retune_needed(host);
+}
+
/**
* mmc_of_parse() - parse host's device-tree node
* @host: host whose node should be parsed.
@@ -512,6 +557,7 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *dev)
#ifdef CONFIG_PM
host->pm_notify.notifier_call = mmc_pm_notify;
#endif
+ setup_timer(&host->retune_timer, mmc_retune_timer, (unsigned long)host);
/*
* By default, hosts do not support SGIO or large requests.
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 9f32270..bfbe749 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -12,6 +12,7 @@
#include <linux/leds.h>
#include <linux/mutex.h>
+#include <linux/timer.h>
#include <linux/sched.h>
#include <linux/device.h>
#include <linux/fault-inject.h>
@@ -327,10 +328,16 @@ struct mmc_host {
#ifdef CONFIG_MMC_DEBUG
unsigned int removed:1; /* host is being removed */
#endif
+ unsigned int can_retune:1; /* re-tuning can be used */
+ unsigned int doing_retune:1; /* re-tuning in progress */
int rescan_disable; /* disable card detection */
int rescan_entered; /* used with nonremovable devices */
+ int need_retune; /* re-tuning is needed */
+ int hold_retune; /* hold off re-tuning */
+ struct timer_list retune_timer; /* for periodic re-tuning */
+
bool trigger_card_event; /* card_event necessary */
struct mmc_card *card; /* device attached to this host */
@@ -519,4 +526,55 @@ static inline bool mmc_card_hs400(struct mmc_card *card)
return card->host->ios.timing == MMC_TIMING_MMC_HS400;
}
+void mmc_retune_enable(struct mmc_host *host, unsigned int period);
+void mmc_retune_disable(struct mmc_host *host);
+void mmc_retune_timer_stop(struct mmc_host *host);
+int mmc_retune(struct mmc_host *host);
+
+static inline void mmc_retune_needed(struct mmc_host *host)
+{
+ if (host->can_retune)
+ host->need_retune = 1;
+}
+
+static inline void mmc_retune_not_needed(struct mmc_host *host)
+{
+ host->need_retune = 0;
+}
+
+static inline void mmc_retune_hold(struct mmc_host *host)
+{
+ host->hold_retune += 1;
+}
+
+static inline void mmc_retune_release(struct mmc_host *host)
+{
+ if (host->hold_retune)
+ host->hold_retune -= 1;
+ else
+ WARN_ON(1);
+}
+
+static inline int mmc_retune_and_hold(struct mmc_host *host)
+{
+ int err;
+
+ err = mmc_retune(host);
+ if (!err)
+ mmc_retune_hold(host);
+
+ return err;
+}
+
+static inline int mmc_retune_retry(struct mmc_host *host)
+{
+ int err;
+
+ mmc_retune_release(host);
+ err = mmc_retune(host);
+ mmc_retune_hold(host);
+
+ return err;
+}
+
#endif /* LINUX_MMC_HOST_H */
--
1.9.1
next prev parent reply other threads:[~2014-12-05 17:43 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-05 17:40 [RFC PATCH 00/13] mmc: host: Add facility to support re-tuning Adrian Hunter
2014-12-05 17:40 ` [PATCH 01/13] mmc: core: Simplify by adding mmc_execute_tuning() Adrian Hunter
2015-01-13 11:19 ` Ulf Hansson
2014-12-05 17:41 ` Adrian Hunter [this message]
2015-01-13 11:25 ` [PATCH 02/13] mmc: host: Add facility to support re-tuning Ulf Hansson
2015-01-13 13:23 ` Adrian Hunter
2015-01-13 14:22 ` Ulf Hansson
2015-01-13 14:36 ` Adrian Hunter
2015-01-13 14:56 ` Ulf Hansson
2015-01-13 15:11 ` Arend van Spriel
2015-01-13 15:41 ` Ulf Hansson
2015-01-13 16:02 ` Arend van Spriel
2015-01-14 9:47 ` Ulf Hansson
2015-01-14 9:57 ` Adrian Hunter
2015-01-14 10:13 ` Ulf Hansson
2015-01-14 12:24 ` Adrian Hunter
2015-01-14 12:59 ` Ulf Hansson
2015-01-15 10:17 ` Adrian Hunter
2015-01-15 13:39 ` Ulf Hansson
2015-01-15 14:07 ` Arend van Spriel
2015-01-15 14:17 ` Arend van Spriel
2015-01-15 14:46 ` Ulf Hansson
2015-01-15 14:59 ` Arend van Spriel
2015-01-19 9:27 ` Ulf Hansson
2015-01-19 9:56 ` Adrian Hunter
2015-01-14 12:38 ` Arend van Spriel
2015-01-14 12:52 ` Ulf Hansson
2015-01-13 15:04 ` Arend van Spriel
2014-12-05 17:41 ` [PATCH 03/13] mmc: core: Disable re-tuning when card is no longer initialized Adrian Hunter
2014-12-05 17:41 ` [PATCH 04/13] mmc: core: Move mmc_card_removed() into mmc_start_request() Adrian Hunter
2015-01-13 11:20 ` Ulf Hansson
2014-12-05 17:41 ` [PATCH 05/13] mmc: core: Add support for re-tuning before each request Adrian Hunter
2014-12-05 17:41 ` [PATCH 06/13] mmc: core: Check re-tuning before retrying Adrian Hunter
2014-12-05 17:41 ` [PATCH 07/13] mmc: core: Hold re-tuning during switch commands Adrian Hunter
2014-12-05 17:41 ` [PATCH 08/13] mmc: core: Hold re-tuning during erase commands Adrian Hunter
2014-12-05 17:41 ` [PATCH 09/13] mmc: core: Hold re-tuning while bkops ongoing Adrian Hunter
2014-12-05 17:41 ` [PATCH 10/13] mmc: mmc: Comment that callers need to hold re-tuning if the card is put to sleep Adrian Hunter
2014-12-05 17:41 ` [PATCH 11/13] mmc: core: Add support for HS400 re-tuning Adrian Hunter
2014-12-05 17:41 ` [PATCH 12/13] mmc: sdhci: Always init buf_ready_int Adrian Hunter
2015-01-13 11:21 ` Ulf Hansson
2014-12-05 17:41 ` [PATCH 13/13] mmc: sdhci: Change to new way of doing re-tuning Adrian Hunter
2014-12-19 14:07 ` [RFC PATCH 00/13] mmc: host: Add facility to support re-tuning Adrian Hunter
2014-12-19 14:37 ` Ulf Hansson
2015-01-12 13:05 ` Adrian Hunter
2015-01-13 11:27 ` Ulf Hansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1417801271-15575-3-git-send-email-adrian.hunter@intel.com \
--to=adrian.hunter@intel.com \
--cc=aaron.lu@intel.com \
--cc=alcooperx@gmail.com \
--cc=arend@broadcom.com \
--cc=chris@printf.net \
--cc=girish.shivananjappa@linaro.org \
--cc=linux-mmc@vger.kernel.org \
--cc=prakity@nvidia.com \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox