From: Suman Tripathi <stripathi@apm.com>
To: chris@printf.net, anton@enomsg.org, arnd@arndb.de
Cc: linux-mmc@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
ddutile@redhat.com, jcm@redhat.com, mlangsdo@redhat.com,
patches@apm.com, Suman Tripathi <stripathi@apm.com>
Subject: [PATCH v1 2/2] arm64: dts: Add the arasan sdhc nodes in apm-storm.dtsi.
Date: Tue, 27 Jan 2015 22:51:00 +0530 [thread overview]
Message-ID: <1422379260-10139-3-git-send-email-stripathi@apm.com> (raw)
In-Reply-To: <1422379260-10139-1-git-send-email-stripathi@apm.com>
This patch adds the arasan sdhc nodes to reuse the of-arasan
driver for APM X-Gene SoC.
Signed-off-by: Suman Tripathi <stripathi@apm.com>
---
arch/arm64/boot/dts/apm-storm.dtsi | 43 ++++++++++++++++++++++++++++++++++++++
1 file changed, 43 insertions(+)
diff --git a/arch/arm64/boot/dts/apm-storm.dtsi b/arch/arm64/boot/dts/apm-storm.dtsi
index f1ad9c2..52de7d3 100644
--- a/arch/arm64/boot/dts/apm-storm.dtsi
+++ b/arch/arm64/boot/dts/apm-storm.dtsi
@@ -144,6 +144,40 @@
clock-output-names = "socplldiv2";
};
+ ahbclk: ahbclk@1f2ac000 {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x1f2ac000 0x0 0x1000
+ 0x0 0x17000000 0x0 0x2000>;
+ reg-names = "csr-reg", "div-reg";
+ csr-offset = <0x0>;
+ csr-mask = <0x1>;
+ enable-offset = <0x8>;
+ enable-mask = <0x1>;
+ divider-offset = <0x164>;
+ divider-width = <0x5>;
+ divider-shift = <0x0>;
+ clock-output-names = "ahbclk";
+ };
+
+ sdioclk: sdioclk@1f2ac000 {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x1f2ac000 0x0 0x1000
+ 0x0 0x17000000 0x0 0x2000>;
+ reg-names = "csr-reg", "div-reg";
+ csr-offset = <0x0>;
+ csr-mask = <0x2>;
+ enable-offset = <0x8>;
+ enable-mask = <0x2>;
+ divider-offset = <0x178>;
+ divider-width = <0x8>;
+ divider-shift = <0x0>;
+ clock-output-names = "sdioclk";
+ };
+
qmlclk: qmlclk {
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
@@ -595,6 +629,15 @@
clocks = <&rtcclk 0>;
};
+ sdhc0: sdhc@1c000000 {
+ device_type = "sdhc";
+ compatible = "arasan,sdhci-8.9a";
+ reg = <0x0 0x1c000000 0x0 0x100>;
+ interrupts = <0x0 0x49 0x4>;
+ clock-names = "clk_xin", "clk_ahb";
+ clocks = <&sdioclk 0>, <&ahbclk 0>;
+ };
+
menet: ethernet@17020000 {
compatible = "apm,xgene-enet";
status = "disabled";
--
1.8.2.1
next prev parent reply other threads:[~2015-01-27 17:22 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-27 17:20 [PATCH v1 0/2] Add SDHCI support for APM X-Gene SoC using ARASAN SDHCI controller Suman Tripathi
2015-01-27 17:20 ` [PATCH v1 1/2] mmc: host: arasan: Add addition of-arasan quirks and IOMMU support for arasan SDHCI driver Suman Tripathi
2015-01-27 20:12 ` Arnd Bergmann
2015-01-27 17:21 ` Suman Tripathi [this message]
2015-01-27 20:13 ` [PATCH v1 2/2] arm64: dts: Add the arasan sdhc nodes in apm-storm.dtsi Arnd Bergmann
2015-01-28 4:18 ` Suman Tripathi
2015-01-28 4:23 ` Suman Tripathi
2015-01-28 12:46 ` Arnd Bergmann
2015-01-28 13:22 ` Suman Tripathi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1422379260-10139-3-git-send-email-stripathi@apm.com \
--to=stripathi@apm.com \
--cc=anton@enomsg.org \
--cc=arnd@arndb.de \
--cc=chris@printf.net \
--cc=ddutile@redhat.com \
--cc=devicetree@vger.kernel.org \
--cc=jcm@redhat.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mlangsdo@redhat.com \
--cc=patches@apm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox