public inbox for linux-mmc@vger.kernel.org
 help / color / mirror / Atom feed
From: Rhyland Klein <rklein@nvidia.com>
To: ulf.hansson@linaro.org, chris@printf.net
Cc: swarren@wwwdotorg.org, thierry.reding@gmail.com,
	linux-tegra@vger.kernel.org, linux-kernel@vger.kernel.org,
	pkunapuli@nvidia.com, linux-mmc@vger.kernel.org,
	gnurou@gmail.com, Rhyland Klein <rklein@nvidia.com>
Subject: [PATCH v2] mmc: tegra: Write xfer_mode, CMD regs in together
Date: Wed, 28 Jan 2015 11:45:16 -0500	[thread overview]
Message-ID: <1422463516-19557-1-git-send-email-rklein@nvidia.com> (raw)

From: Pavan Kunapuli <pkunapuli@nvidia.com>

If there is a gap between xfer mode and command register writes,
tegra SDMMC controller can sometimes issue a spurious command before
the CMD register is written. To avoid this, these two registers need
to be written together in a single write operation.

This is implemented as an NVQUIRK as it applies to T114, T124 and
T132.

Signed-off-by: Pavan Kunapuli <pkunapuli@nvidia.com>
Signed-off-by: Rhyland Klein <rklein@nvidia.com>
---
v2:
 - Fixed quirk flag check  s/*/&
 - Removed line clearing xfer_mode_shadow
 - Added explicit mention of which platforms this applies to in
   description

 drivers/mmc/host/sdhci-tegra.c |   30 +++++++++++++++++++++++++++++-
 1 file changed, 29 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index 59797106af93..f3778d58d1cd 100644
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -41,6 +41,7 @@
 #define NVQUIRK_DISABLE_SDR50		BIT(3)
 #define NVQUIRK_DISABLE_SDR104		BIT(4)
 #define NVQUIRK_DISABLE_DDR50		BIT(5)
+#define NVQUIRK_SHADOW_XFER_MODE_REG	BIT(6)
 
 struct sdhci_tegra_soc_data {
 	const struct sdhci_pltfm_data *pdata;
@@ -67,6 +68,31 @@ static u16 tegra_sdhci_readw(struct sdhci_host *host, int reg)
 	return readw(host->ioaddr + reg);
 }
 
+static void tegra_sdhci_writew(struct sdhci_host *host, u16 val, int reg)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_tegra *tegra_host = pltfm_host->priv;
+	const struct sdhci_tegra_soc_data *soc_data = tegra_host->soc_data;
+
+	if (soc_data->nvquirks & NVQUIRK_SHADOW_XFER_MODE_REG) {
+		switch (reg) {
+		case SDHCI_TRANSFER_MODE:
+			/*
+			 * Postpone this write, we must do it together with a
+			 * command write that is down below.
+			 */
+			pltfm_host->xfer_mode_shadow = val;
+			return;
+		case SDHCI_COMMAND:
+			writel((val << 16) | pltfm_host->xfer_mode_shadow,
+				host->ioaddr + SDHCI_TRANSFER_MODE);
+			return;
+		}
+	}
+
+	writew(val, host->ioaddr + reg);
+}
+
 static void tegra_sdhci_writel(struct sdhci_host *host, u32 val, int reg)
 {
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
@@ -147,6 +173,7 @@ static void tegra_sdhci_set_bus_width(struct sdhci_host *host, int bus_width)
 static const struct sdhci_ops tegra_sdhci_ops = {
 	.get_ro     = tegra_sdhci_get_ro,
 	.read_w     = tegra_sdhci_readw,
+	.write_w    = tegra_sdhci_writew,
 	.write_l    = tegra_sdhci_writel,
 	.set_clock  = sdhci_set_clock,
 	.set_bus_width = tegra_sdhci_set_bus_width,
@@ -201,7 +228,8 @@ static struct sdhci_tegra_soc_data soc_data_tegra114 = {
 	.pdata = &sdhci_tegra114_pdata,
 	.nvquirks = NVQUIRK_DISABLE_SDR50 |
 		    NVQUIRK_DISABLE_DDR50 |
-		    NVQUIRK_DISABLE_SDR104,
+		    NVQUIRK_DISABLE_SDR104 |
+		    NVQUIRK_SHADOW_XFER_MODE_REG,
 };
 
 static const struct of_device_id sdhci_tegra_dt_match[] = {
-- 
1.7.9.5

             reply	other threads:[~2015-01-28 16:45 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-28 16:45 Rhyland Klein [this message]
2015-01-29 10:24 ` [PATCH v2] mmc: tegra: Write xfer_mode, CMD regs in together Ulf Hansson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1422463516-19557-1-git-send-email-rklein@nvidia.com \
    --to=rklein@nvidia.com \
    --cc=chris@printf.net \
    --cc=gnurou@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=pkunapuli@nvidia.com \
    --cc=swarren@wwwdotorg.org \
    --cc=thierry.reding@gmail.com \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox