public inbox for linux-mmc@vger.kernel.org
 help / color / mirror / Atom feed
From: Adrian Hunter <adrian.hunter@intel.com>
To: Ulf Hansson <ulf.hansson@linaro.org>, Chris Ball <chris@printf.net>
Cc: linux-mmc <linux-mmc@vger.kernel.org>,
	Aaron Lu <aaron.lu@intel.com>, Philip Rakity <prakity@nvidia.com>,
	Girish K S <girish.shivananjappa@linaro.org>,
	Al Cooper <alcooperx@gmail.com>,
	Arend van Spriel <arend@broadcom.com>
Subject: [PATCH V2 01/15] mmc: host: Add facility to support re-tuning
Date: Thu, 29 Jan 2015 11:00:16 +0200	[thread overview]
Message-ID: <1422522030-17793-2-git-send-email-adrian.hunter@intel.com> (raw)
In-Reply-To: <1422522030-17793-1-git-send-email-adrian.hunter@intel.com>

Currently, there is core support for tuning during
initialization. There can also be a need to re-tune
periodically (e.g. sdhci) or to re-tune after the
host controller is powered off (e.g. after PM
runtime suspend / resume) or to re-tune in response
to CRC errors.

The main requirements for re-tuning are:
  - ability to enable /disable re-tuning
  - ability to flag that re-tuning is needed
  - ability to re-tune before any request
  - ability to hold off re-tuning if the card is busy
  - ability to hold off re-tuning if re-tuning is in
  progress
  - ability to run a re-tuning timer

To support those requirements 5 members are added to struct
mmc_host:

  unsigned int		can_retune:1;	/* re-tuning can be used */
  unsigned int		doing_retune:1;	/* re-tuning in progress */
  int			need_retune;	/* re-tuning is needed */
  int			hold_retune;	/* hold off re-tuning */
  struct timer_list	retune_timer;	/* for periodic re-tuning */

need_retune is an integer so it can be set without needing
synchronization. hold_retune is a integer to allow nesting.

Various simple functions are provided to set / clear those
variables.

Subsequent patches take those functions into use.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
---
 drivers/mmc/core/host.c  | 46 ++++++++++++++++++++++++++++++++++++++
 include/linux/mmc/host.h | 58 ++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 104 insertions(+)

diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index 8be0df7..221d46d 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -301,6 +301,51 @@ static inline void mmc_host_clk_sysfs_init(struct mmc_host *host)
 
 #endif
 
+void mmc_retune_enable(struct mmc_host *host, unsigned int period)
+{
+	host->can_retune = 1;
+	if (period)
+		mod_timer(&host->retune_timer, jiffies + period * HZ);
+}
+
+void mmc_retune_disable(struct mmc_host *host)
+{
+	host->can_retune = 0;
+	del_timer_sync(&host->retune_timer);
+	host->need_retune = 0;
+}
+
+void mmc_retune_timer_stop(struct mmc_host *host)
+{
+	del_timer_sync(&host->retune_timer);
+}
+
+int mmc_retune(struct mmc_host *host)
+{
+	int err;
+
+	if (!host->need_retune || host->doing_retune || host->hold_retune ||
+	    !host->card)
+		return 0;
+
+	host->need_retune = 0;
+
+	host->doing_retune = 1;
+
+	err = mmc_execute_tuning(host->card);
+
+	host->doing_retune = 0;
+
+	return err;
+}
+
+static void mmc_retune_timer(unsigned long data)
+{
+	struct mmc_host *host = (struct mmc_host *)data;
+
+	mmc_retune_needed(host);
+}
+
 /**
  *	mmc_of_parse() - parse host's device-tree node
  *	@host: host whose node should be parsed.
@@ -504,6 +549,7 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *dev)
 #ifdef CONFIG_PM
 	host->pm_notify.notifier_call = mmc_pm_notify;
 #endif
+	setup_timer(&host->retune_timer, mmc_retune_timer, (unsigned long)host);
 
 	/*
 	 * By default, hosts do not support SGIO or large requests.
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 0c8cbe5..e9a7470 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -12,6 +12,7 @@
 
 #include <linux/leds.h>
 #include <linux/mutex.h>
+#include <linux/timer.h>
 #include <linux/sched.h>
 #include <linux/device.h>
 #include <linux/fault-inject.h>
@@ -327,10 +328,16 @@ struct mmc_host {
 #ifdef CONFIG_MMC_DEBUG
 	unsigned int		removed:1;	/* host is being removed */
 #endif
+	unsigned int		can_retune:1;	/* re-tuning can be used */
+	unsigned int		doing_retune:1;	/* re-tuning in progress */
 
 	int			rescan_disable;	/* disable card detection */
 	int			rescan_entered;	/* used with nonremovable devices */
 
+	int			need_retune;	/* re-tuning is needed */
+	int			hold_retune;	/* hold off re-tuning */
+	struct timer_list	retune_timer;	/* for periodic re-tuning */
+
 	bool			trigger_card_event; /* card_event necessary */
 
 	struct mmc_card		*card;		/* device attached to this host */
@@ -519,4 +526,55 @@ static inline bool mmc_card_hs400(struct mmc_card *card)
 	return card->host->ios.timing == MMC_TIMING_MMC_HS400;
 }
 
+void mmc_retune_enable(struct mmc_host *host, unsigned int period);
+void mmc_retune_disable(struct mmc_host *host);
+void mmc_retune_timer_stop(struct mmc_host *host);
+int mmc_retune(struct mmc_host *host);
+
+static inline void mmc_retune_needed(struct mmc_host *host)
+{
+	if (host->can_retune)
+		host->need_retune = 1;
+}
+
+static inline void mmc_retune_not_needed(struct mmc_host *host)
+{
+	host->need_retune = 0;
+}
+
+static inline void mmc_retune_hold(struct mmc_host *host)
+{
+	host->hold_retune += 1;
+}
+
+static inline void mmc_retune_release(struct mmc_host *host)
+{
+	if (host->hold_retune)
+		host->hold_retune -= 1;
+	else
+		WARN_ON(1);
+}
+
+static inline int mmc_retune_and_hold(struct mmc_host *host)
+{
+	int err;
+
+	err = mmc_retune(host);
+	if (!err)
+		mmc_retune_hold(host);
+
+	return err;
+}
+
+static inline int mmc_retune_recheck(struct mmc_host *host)
+{
+	int err;
+
+	mmc_retune_release(host);
+	err = mmc_retune(host);
+	mmc_retune_hold(host);
+
+	return err;
+}
+
 #endif /* LINUX_MMC_HOST_H */
-- 
1.9.1


  reply	other threads:[~2015-01-29  9:02 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-29  9:00 [PATCH V2 00/15] mmc: host: Add facility to support re-tuning Adrian Hunter
2015-01-29  9:00 ` Adrian Hunter [this message]
2015-01-29  9:00 ` [PATCH V2 02/15] mmc: core: Disable re-tuning when card is no longer initialized Adrian Hunter
2015-01-29  9:00 ` [PATCH V2 03/15] mmc: core: Add support for re-tuning before each request Adrian Hunter
2015-01-29  9:00 ` [PATCH V2 04/15] mmc: core: Check re-tuning before retrying Adrian Hunter
2015-01-29  9:00 ` [PATCH V2 05/15] mmc: core: Hold re-tuning during switch commands Adrian Hunter
2015-01-29  9:00 ` [PATCH V2 06/15] mmc: core: Hold re-tuning during erase commands Adrian Hunter
2015-01-29  9:00 ` [PATCH V2 07/15] mmc: core: Hold re-tuning while bkops ongoing Adrian Hunter
2015-01-29  9:00 ` [PATCH V2 08/15] mmc: mmc: Comment that callers need to hold re-tuning if the card is put to sleep Adrian Hunter
2015-01-29  9:00 ` [PATCH V2 09/15] mmc: core: Separate out the mmc_switch status check so it can be re-used Adrian Hunter
2015-01-29  9:00 ` [PATCH V2 10/15] mmc: core: Add support for HS400 re-tuning Adrian Hunter
2015-02-04 13:35   ` [PATCH V3 " Adrian Hunter
2015-01-29  9:00 ` [PATCH V2 11/15] mmc: sdhci: Change to new way of doing re-tuning Adrian Hunter
2015-03-06 12:51   ` Ulf Hansson
2015-03-09  8:37     ` Adrian Hunter
2015-03-10 13:55       ` Ulf Hansson
2015-03-10 14:20         ` Adrian Hunter
2015-03-23 12:54           ` Ulf Hansson
2015-03-23 14:26             ` Adrian Hunter
2015-03-23 15:02               ` Ulf Hansson
2015-03-23 21:11                 ` Adrian Hunter
2015-03-24 21:12                   ` Ulf Hansson
2015-03-25 13:48                     ` Adrian Hunter
2015-03-26 16:06                       ` Ulf Hansson
2015-03-27  9:54                         ` Adrian Hunter
2015-03-27 12:04                           ` Adrian Hunter
2015-03-24  2:49               ` NeilBrown
2015-03-24  9:40                 ` Ulf Hansson
2015-01-29  9:00 ` [PATCH V2 12/15] mmc: sdhci: Flag re-tuning is needed on CRC or End-Bit errors Adrian Hunter
2015-01-29  9:00 ` [PATCH V2 13/15] mmc: block: Check re-tuning in the recovery path Adrian Hunter
2015-01-29  9:00 ` [PATCH V2 14/15] mmc: block: Retry data requests when re-tuning is needed Adrian Hunter
2015-02-27 12:55   ` [PATCH V3 14/15] mmc: block: Retry errored " Adrian Hunter
2015-01-29  9:00 ` [PATCH V2 15/15] mmc: core: Don't print reset warning if reset is not supported Adrian Hunter
2015-02-09  9:33   ` Arend van Spriel
2015-02-09  9:47     ` Adrian Hunter
2015-02-09 16:05       ` Johan Rudholm
2015-02-09  8:43 ` [PATCH V2 00/15] mmc: host: Add facility to support re-tuning Adrian Hunter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1422522030-17793-2-git-send-email-adrian.hunter@intel.com \
    --to=adrian.hunter@intel.com \
    --cc=aaron.lu@intel.com \
    --cc=alcooperx@gmail.com \
    --cc=arend@broadcom.com \
    --cc=chris@printf.net \
    --cc=girish.shivananjappa@linaro.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=prakity@nvidia.com \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox