public inbox for linux-mmc@vger.kernel.org
 help / color / mirror / Atom feed
From: Adrian Hunter <adrian.hunter@intel.com>
To: Ulf Hansson <ulf.hansson@linaro.org>, Chris Ball <chris@printf.net>
Cc: linux-mmc <linux-mmc@vger.kernel.org>,
	Aaron Lu <aaron.lu@intel.com>, Philip Rakity <prakity@nvidia.com>,
	Girish K S <girish.shivananjappa@linaro.org>,
	Al Cooper <alcooperx@gmail.com>,
	Arend van Spriel <arend@broadcom.com>
Subject: [PATCH V2 05/15] mmc: core: Hold re-tuning during switch commands
Date: Thu, 29 Jan 2015 11:00:20 +0200	[thread overview]
Message-ID: <1422522030-17793-6-git-send-email-adrian.hunter@intel.com> (raw)
In-Reply-To: <1422522030-17793-1-git-send-email-adrian.hunter@intel.com>

Hold re-tuning during switch commands to prevent
it from conflicting with the busy state or the CMD13
verification.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
---
 drivers/mmc/core/mmc_ops.c | 31 +++++++++++++++++++++----------
 1 file changed, 21 insertions(+), 10 deletions(-)

diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index 0ea042d..9fbf39c 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -474,6 +474,10 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
 	u32 status = 0;
 	bool use_r1b_resp = use_busy_signal;
 
+	err = mmc_retune_and_hold(host);
+	if (err)
+		return err;
+
 	/*
 	 * If the cmd timeout and the max_busy_timeout of the host are both
 	 * specified, let's validate them. A failure means we need to prevent
@@ -506,11 +510,11 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
 
 	err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
 	if (err)
-		return err;
+		goto out;
 
 	/* No need to check card status in case of unblocking command */
 	if (!use_busy_signal)
-		return 0;
+		goto out;
 
 	/*
 	 * CRC errors shall only be ignored in cases were CMD13 is used to poll
@@ -529,7 +533,7 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
 		if (send_status) {
 			err = __mmc_send_status(card, &status, ignore_crc);
 			if (err)
-				return err;
+				goto out;
 		}
 		if ((host->caps & MMC_CAP_WAIT_WHILE_BUSY) && use_r1b_resp)
 			break;
@@ -543,29 +547,36 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
 		 */
 		if (!send_status) {
 			mmc_delay(timeout_ms);
-			return 0;
+			goto out;
 		}
 
 		/* Timeout if the device never leaves the program state. */
 		if (time_after(jiffies, timeout)) {
 			pr_err("%s: Card stuck in programming state! %s\n",
 				mmc_hostname(host), __func__);
-			return -ETIMEDOUT;
+			err = -ETIMEDOUT;
+			goto out;
 		}
 	} while (R1_CURRENT_STATE(status) == R1_STATE_PRG);
 
 	if (mmc_host_is_spi(host)) {
-		if (status & R1_SPI_ILLEGAL_COMMAND)
-			return -EBADMSG;
+		if (status & R1_SPI_ILLEGAL_COMMAND) {
+			err = -EBADMSG;
+			goto out;
+		}
 	} else {
 		if (status & 0xFDFFA000)
 			pr_warn("%s: unexpected status %#x after switch\n",
 				mmc_hostname(host), status);
-		if (status & R1_SWITCH_ERROR)
-			return -EBADMSG;
+		if (status & R1_SWITCH_ERROR) {
+			err = -EBADMSG;
+			goto out;
+		}
 	}
+out:
+	mmc_retune_release(host);
 
-	return 0;
+	return err;
 }
 EXPORT_SYMBOL_GPL(__mmc_switch);
 
-- 
1.9.1


  parent reply	other threads:[~2015-01-29  9:03 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-29  9:00 [PATCH V2 00/15] mmc: host: Add facility to support re-tuning Adrian Hunter
2015-01-29  9:00 ` [PATCH V2 01/15] " Adrian Hunter
2015-01-29  9:00 ` [PATCH V2 02/15] mmc: core: Disable re-tuning when card is no longer initialized Adrian Hunter
2015-01-29  9:00 ` [PATCH V2 03/15] mmc: core: Add support for re-tuning before each request Adrian Hunter
2015-01-29  9:00 ` [PATCH V2 04/15] mmc: core: Check re-tuning before retrying Adrian Hunter
2015-01-29  9:00 ` Adrian Hunter [this message]
2015-01-29  9:00 ` [PATCH V2 06/15] mmc: core: Hold re-tuning during erase commands Adrian Hunter
2015-01-29  9:00 ` [PATCH V2 07/15] mmc: core: Hold re-tuning while bkops ongoing Adrian Hunter
2015-01-29  9:00 ` [PATCH V2 08/15] mmc: mmc: Comment that callers need to hold re-tuning if the card is put to sleep Adrian Hunter
2015-01-29  9:00 ` [PATCH V2 09/15] mmc: core: Separate out the mmc_switch status check so it can be re-used Adrian Hunter
2015-01-29  9:00 ` [PATCH V2 10/15] mmc: core: Add support for HS400 re-tuning Adrian Hunter
2015-02-04 13:35   ` [PATCH V3 " Adrian Hunter
2015-01-29  9:00 ` [PATCH V2 11/15] mmc: sdhci: Change to new way of doing re-tuning Adrian Hunter
2015-03-06 12:51   ` Ulf Hansson
2015-03-09  8:37     ` Adrian Hunter
2015-03-10 13:55       ` Ulf Hansson
2015-03-10 14:20         ` Adrian Hunter
2015-03-23 12:54           ` Ulf Hansson
2015-03-23 14:26             ` Adrian Hunter
2015-03-23 15:02               ` Ulf Hansson
2015-03-23 21:11                 ` Adrian Hunter
2015-03-24 21:12                   ` Ulf Hansson
2015-03-25 13:48                     ` Adrian Hunter
2015-03-26 16:06                       ` Ulf Hansson
2015-03-27  9:54                         ` Adrian Hunter
2015-03-27 12:04                           ` Adrian Hunter
2015-03-24  2:49               ` NeilBrown
2015-03-24  9:40                 ` Ulf Hansson
2015-01-29  9:00 ` [PATCH V2 12/15] mmc: sdhci: Flag re-tuning is needed on CRC or End-Bit errors Adrian Hunter
2015-01-29  9:00 ` [PATCH V2 13/15] mmc: block: Check re-tuning in the recovery path Adrian Hunter
2015-01-29  9:00 ` [PATCH V2 14/15] mmc: block: Retry data requests when re-tuning is needed Adrian Hunter
2015-02-27 12:55   ` [PATCH V3 14/15] mmc: block: Retry errored " Adrian Hunter
2015-01-29  9:00 ` [PATCH V2 15/15] mmc: core: Don't print reset warning if reset is not supported Adrian Hunter
2015-02-09  9:33   ` Arend van Spriel
2015-02-09  9:47     ` Adrian Hunter
2015-02-09 16:05       ` Johan Rudholm
2015-02-09  8:43 ` [PATCH V2 00/15] mmc: host: Add facility to support re-tuning Adrian Hunter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1422522030-17793-6-git-send-email-adrian.hunter@intel.com \
    --to=adrian.hunter@intel.com \
    --cc=aaron.lu@intel.com \
    --cc=alcooperx@gmail.com \
    --cc=arend@broadcom.com \
    --cc=chris@printf.net \
    --cc=girish.shivananjappa@linaro.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=prakity@nvidia.com \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox