From: Rhyland Klein <rklein-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
To: Ulf Hansson <ulf.hansson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Chris Ball <chris-OsFVWbfNK3isTnJN9+BGXg@public.gmane.org>
Cc: Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>,
Thierry Reding
<thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Alexandre Courbot
<gnurou-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
linux-mmc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Rhyland Klein <rklein-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Subject: [PATCH] mmc: tegra: Optimize write_w path for tegra114 and later
Date: Wed, 11 Feb 2015 12:55:51 -0500 [thread overview]
Message-ID: <1423677351-31635-1-git-send-email-rklein@nvidia.com> (raw)
Setup a different set of sdhci_ops for tegra114 and later so that
the write_w callback is only used on tegra114. This allows us to
remove the NVQUIRK_SHADOW_XFER_MODE_REG and simply the logic
in tegra_sdhci_writew.
This was suggested by Alexandre Courbot.
Signed-off-by: Rhyland Klein <rklein-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
drivers/mmc/host/sdhci-tegra.c | 45 +++++++++++++++++++++++-----------------
1 file changed, 26 insertions(+), 19 deletions(-)
diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index f3778d58d1cd..180062498c35 100644
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -41,7 +41,6 @@
#define NVQUIRK_DISABLE_SDR50 BIT(3)
#define NVQUIRK_DISABLE_SDR104 BIT(4)
#define NVQUIRK_DISABLE_DDR50 BIT(5)
-#define NVQUIRK_SHADOW_XFER_MODE_REG BIT(6)
struct sdhci_tegra_soc_data {
const struct sdhci_pltfm_data *pdata;
@@ -74,20 +73,18 @@ static void tegra_sdhci_writew(struct sdhci_host *host, u16 val, int reg)
struct sdhci_tegra *tegra_host = pltfm_host->priv;
const struct sdhci_tegra_soc_data *soc_data = tegra_host->soc_data;
- if (soc_data->nvquirks & NVQUIRK_SHADOW_XFER_MODE_REG) {
- switch (reg) {
- case SDHCI_TRANSFER_MODE:
- /*
- * Postpone this write, we must do it together with a
- * command write that is down below.
- */
- pltfm_host->xfer_mode_shadow = val;
- return;
- case SDHCI_COMMAND:
- writel((val << 16) | pltfm_host->xfer_mode_shadow,
- host->ioaddr + SDHCI_TRANSFER_MODE);
- return;
- }
+ switch (reg) {
+ case SDHCI_TRANSFER_MODE:
+ /*
+ * Postpone this write, we must do it together with a
+ * command write that is down below.
+ */
+ pltfm_host->xfer_mode_shadow = val;
+ return;
+ case SDHCI_COMMAND:
+ writel((val << 16) | pltfm_host->xfer_mode_shadow,
+ host->ioaddr + SDHCI_TRANSFER_MODE);
+ return;
}
writew(val, host->ioaddr + reg);
@@ -173,7 +170,6 @@ static void tegra_sdhci_set_bus_width(struct sdhci_host *host, int bus_width)
static const struct sdhci_ops tegra_sdhci_ops = {
.get_ro = tegra_sdhci_get_ro,
.read_w = tegra_sdhci_readw,
- .write_w = tegra_sdhci_writew,
.write_l = tegra_sdhci_writel,
.set_clock = sdhci_set_clock,
.set_bus_width = tegra_sdhci_set_bus_width,
@@ -214,6 +210,18 @@ static struct sdhci_tegra_soc_data soc_data_tegra30 = {
NVQUIRK_DISABLE_SDR104,
};
+static const struct sdhci_ops tegra114_sdhci_ops = {
+ .get_ro = tegra_sdhci_get_ro,
+ .read_w = tegra_sdhci_readw,
+ .write_w = tegra_sdhci_writew,
+ .write_l = tegra_sdhci_writel,
+ .set_clock = sdhci_set_clock,
+ .set_bus_width = tegra_sdhci_set_bus_width,
+ .reset = tegra_sdhci_reset,
+ .set_uhs_signaling = sdhci_set_uhs_signaling,
+ .get_max_clock = sdhci_pltfm_clk_get_max_clock,
+};
+
static const struct sdhci_pltfm_data sdhci_tegra114_pdata = {
.quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
@@ -221,15 +229,14 @@ static const struct sdhci_pltfm_data sdhci_tegra114_pdata = {
SDHCI_QUIRK_NO_HISPD_BIT |
SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC |
SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
- .ops = &tegra_sdhci_ops,
+ .ops = &tegra114_sdhci_ops,
};
static struct sdhci_tegra_soc_data soc_data_tegra114 = {
.pdata = &sdhci_tegra114_pdata,
.nvquirks = NVQUIRK_DISABLE_SDR50 |
NVQUIRK_DISABLE_DDR50 |
- NVQUIRK_DISABLE_SDR104 |
- NVQUIRK_SHADOW_XFER_MODE_REG,
+ NVQUIRK_DISABLE_SDR104,
};
static const struct of_device_id sdhci_tegra_dt_match[] = {
--
1.7.9.5
next reply other threads:[~2015-02-11 17:55 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-11 17:55 Rhyland Klein [this message]
[not found] ` <1423677351-31635-1-git-send-email-rklein-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2015-02-12 3:50 ` [PATCH] mmc: tegra: Optimize write_w path for tegra114 and later Alexandre Courbot
[not found] ` <CAAVeFuKVWGExO2y9cb=icvGmNZWTnYve2w2N25t_ybmSo9MPYg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-02-12 16:17 ` Rhyland Klein
2015-03-05 14:59 ` Ulf Hansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1423677351-31635-1-git-send-email-rklein@nvidia.com \
--to=rklein-ddmlm1+adcrqt0dzr+alfa@public.gmane.org \
--cc=chris-OsFVWbfNK3isTnJN9+BGXg@public.gmane.org \
--cc=gnurou-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-mmc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org \
--cc=thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=ulf.hansson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox