From: Adrian Hunter <adrian.hunter@intel.com>
To: Ulf Hansson <ulf.hansson@linaro.org>, Chris Ball <chris@printf.net>
Cc: linux-mmc <linux-mmc@vger.kernel.org>,
Aaron Lu <aaron.lu@intel.com>, Philip Rakity <prakity@nvidia.com>,
Girish K S <girish.shivananjappa@linaro.org>,
Al Cooper <alcooperx@gmail.com>,
Arend van Spriel <arend@broadcom.com>
Subject: [PATCH V3 14/15] mmc: block: Retry errored data requests when re-tuning is needed
Date: Fri, 27 Feb 2015 14:55:56 +0200 [thread overview]
Message-ID: <1425041756-3438-1-git-send-email-adrian.hunter@intel.com> (raw)
In-Reply-To: <1422522030-17793-15-git-send-email-adrian.hunter@intel.com>
Retry errored data requests when re-tuning is needed and
add a flag to struct mmc_blk_request so that the retry
is only done once.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
---
Changes in V3:
Only retry when there is an error
drivers/mmc/card/block.c | 11 ++++++++++-
drivers/mmc/card/queue.h | 1 +
2 files changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 293e938..3baf7ea 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -1195,6 +1195,7 @@ static int mmc_blk_err_check(struct mmc_card *card,
mmc_active);
struct mmc_blk_request *brq = &mq_mrq->brq;
struct request *req = mq_mrq->req;
+ int need_retune = card->host->need_retune;
int ecc_err = 0, gen_err = 0;
/*
@@ -1262,6 +1263,12 @@ static int mmc_blk_err_check(struct mmc_card *card,
}
if (brq->data.error) {
+ if (need_retune && !brq->retune_retry_done) {
+ pr_info("%s: retrying because a re-tune was needed\n",
+ req->rq_disk->disk_name);
+ brq->retune_retry_done = 1;
+ return MMC_BLK_RETRY;
+ }
pr_err("%s: error %d transferring data, sector %u, nr %u, cmd response %#x, card status %#x\n",
req->rq_disk->disk_name, brq->data.error,
(unsigned)blk_rq_pos(req),
@@ -1821,7 +1828,7 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc)
struct mmc_blk_data *md = mq->data;
struct mmc_card *card = md->queue.card;
struct mmc_blk_request *brq = &mq->mqrq_cur->brq;
- int ret = 1, disable_multi = 0, retry = 0, type;
+ int ret = 1, disable_multi = 0, retry = 0, type, retune_retry_done = 0;
enum mmc_blk_status status;
struct mmc_queue_req *mq_rq;
struct request *req = rqc;
@@ -1905,6 +1912,7 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc)
break;
goto cmd_abort;
case MMC_BLK_RETRY:
+ retune_retry_done = brq->retune_retry_done;
if (retry++ < 5)
break;
/* Fall through */
@@ -1967,6 +1975,7 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc)
mmc_start_req(card->host,
&mq_rq->mmc_active, NULL);
}
+ mq_rq->brq.retune_retry_done = retune_retry_done;
}
} while (ret);
diff --git a/drivers/mmc/card/queue.h b/drivers/mmc/card/queue.h
index 5752d50..7e27915 100644
--- a/drivers/mmc/card/queue.h
+++ b/drivers/mmc/card/queue.h
@@ -12,6 +12,7 @@ struct mmc_blk_request {
struct mmc_command cmd;
struct mmc_command stop;
struct mmc_data data;
+ int retune_retry_done;
};
enum mmc_packed_type {
--
1.9.1
next prev parent reply other threads:[~2015-02-27 12:57 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-29 9:00 [PATCH V2 00/15] mmc: host: Add facility to support re-tuning Adrian Hunter
2015-01-29 9:00 ` [PATCH V2 01/15] " Adrian Hunter
2015-01-29 9:00 ` [PATCH V2 02/15] mmc: core: Disable re-tuning when card is no longer initialized Adrian Hunter
2015-01-29 9:00 ` [PATCH V2 03/15] mmc: core: Add support for re-tuning before each request Adrian Hunter
2015-01-29 9:00 ` [PATCH V2 04/15] mmc: core: Check re-tuning before retrying Adrian Hunter
2015-01-29 9:00 ` [PATCH V2 05/15] mmc: core: Hold re-tuning during switch commands Adrian Hunter
2015-01-29 9:00 ` [PATCH V2 06/15] mmc: core: Hold re-tuning during erase commands Adrian Hunter
2015-01-29 9:00 ` [PATCH V2 07/15] mmc: core: Hold re-tuning while bkops ongoing Adrian Hunter
2015-01-29 9:00 ` [PATCH V2 08/15] mmc: mmc: Comment that callers need to hold re-tuning if the card is put to sleep Adrian Hunter
2015-01-29 9:00 ` [PATCH V2 09/15] mmc: core: Separate out the mmc_switch status check so it can be re-used Adrian Hunter
2015-01-29 9:00 ` [PATCH V2 10/15] mmc: core: Add support for HS400 re-tuning Adrian Hunter
2015-02-04 13:35 ` [PATCH V3 " Adrian Hunter
2015-01-29 9:00 ` [PATCH V2 11/15] mmc: sdhci: Change to new way of doing re-tuning Adrian Hunter
2015-03-06 12:51 ` Ulf Hansson
2015-03-09 8:37 ` Adrian Hunter
2015-03-10 13:55 ` Ulf Hansson
2015-03-10 14:20 ` Adrian Hunter
2015-03-23 12:54 ` Ulf Hansson
2015-03-23 14:26 ` Adrian Hunter
2015-03-23 15:02 ` Ulf Hansson
2015-03-23 21:11 ` Adrian Hunter
2015-03-24 21:12 ` Ulf Hansson
2015-03-25 13:48 ` Adrian Hunter
2015-03-26 16:06 ` Ulf Hansson
2015-03-27 9:54 ` Adrian Hunter
2015-03-27 12:04 ` Adrian Hunter
2015-03-24 2:49 ` NeilBrown
2015-03-24 9:40 ` Ulf Hansson
2015-01-29 9:00 ` [PATCH V2 12/15] mmc: sdhci: Flag re-tuning is needed on CRC or End-Bit errors Adrian Hunter
2015-01-29 9:00 ` [PATCH V2 13/15] mmc: block: Check re-tuning in the recovery path Adrian Hunter
2015-01-29 9:00 ` [PATCH V2 14/15] mmc: block: Retry data requests when re-tuning is needed Adrian Hunter
2015-02-27 12:55 ` Adrian Hunter [this message]
2015-01-29 9:00 ` [PATCH V2 15/15] mmc: core: Don't print reset warning if reset is not supported Adrian Hunter
2015-02-09 9:33 ` Arend van Spriel
2015-02-09 9:47 ` Adrian Hunter
2015-02-09 16:05 ` Johan Rudholm
2015-02-09 8:43 ` [PATCH V2 00/15] mmc: host: Add facility to support re-tuning Adrian Hunter
-- strict thread matches above, loose matches on Subject: below --
2015-03-10 12:42 [PATCH V3 " Adrian Hunter
2015-03-10 12:43 ` [PATCH V3 14/15] mmc: block: Retry errored data requests when re-tuning is needed Adrian Hunter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1425041756-3438-1-git-send-email-adrian.hunter@intel.com \
--to=adrian.hunter@intel.com \
--cc=aaron.lu@intel.com \
--cc=alcooperx@gmail.com \
--cc=arend@broadcom.com \
--cc=chris@printf.net \
--cc=girish.shivananjappa@linaro.org \
--cc=linux-mmc@vger.kernel.org \
--cc=prakity@nvidia.com \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox