[PATCH V6 04/15] mmc: core: Check re-tuning before retrying

[Adrian Hunter <adrian.hunter@intel.com>]

Possibly a command is failing because re-tuning is needed.
Use mmc_retune_recheck() to check re-tuning. At that point
re-tuning is held, at least by the request, so
mmc_retune_recheck() flags host->retune_now if the hold
count is 1.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
---
 drivers/mmc/core/core.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index a9936cb..08bf7e3 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -434,6 +434,7 @@ static int mmc_wait_for_data_req_done(struct mmc_host *host,
 							    host->areq);
 				break; /* return err */
 			} else {
+				mmc_retune_recheck(host);
 				pr_info("%s: req failed (CMD%u): %d, retrying...\n",
 					mmc_hostname(host),
 					cmd->opcode, cmd->error);
@@ -483,6 +484,8 @@ static void mmc_wait_for_req_done(struct mmc_host *host,
 		    mmc_card_removed(host->card))
 			break;
 
+		mmc_retune_recheck(host);
+
 		pr_debug("%s: req failed (CMD%u): %d, retrying...\n",
 			 mmc_hostname(host), cmd->opcode, cmd->error);
 		cmd->retries--;
-- 
1.9.1