[PATCH v3 5/6] ARM: shmobile: lager: Set clock rates for SDHI

[Ben Hutchings <ben.hutchings@codethink.co.uk>]

Set the input clocks to the highest supported speeds.

Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
---
 arch/arm/boot/dts/r8a7790-lager.dts | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index aaa4f258e279..5f68e53c58ae 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -488,6 +488,9 @@
 	pinctrl-0 = <&sdhi0_pins>;
 	pinctrl-names = "default";
 
+	assigned-clocks = <&mstp3_clks R8A7790_CLK_SDHI0>;
+	assigned-clock-rates = <156000000>;
+
 	vmmc-supply = <&vcc_sdhi0>;
 	vqmmc-supply = <&vccq_sdhi0>;
 	cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
@@ -498,6 +501,9 @@
 	pinctrl-0 = <&sdhi2_pins>;
 	pinctrl-names = "default";
 
+	assigned-clocks = <&mstp3_clks R8A7790_CLK_SDHI2>;
+	assigned-clock-rates = <97500000>;
+
 	vmmc-supply = <&vcc_sdhi2>;
 	vqmmc-supply = <&vccq_sdhi2>;
 	cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
-- 
2.1.4