From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kishon Vijay Abraham I Subject: [PATCH 3/7] ARM: dts: dra72-evm: Set max clock frequency of MMC1 and MMC2 Date: Thu, 30 Jul 2015 13:43:36 +0530 Message-ID: <1438244020-4244-4-git-send-email-kishon@ti.com> References: <1438244020-4244-1-git-send-email-kishon@ti.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <1438244020-4244-1-git-send-email-kishon@ti.com> Sender: linux-kernel-owner@vger.kernel.org To: tony@atomide.com, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-mmc@vger.kernel.org Cc: bcousson@baylibre.com, robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com, ijc+devicetree@hellion.org.uk, galak@codeaurora.org, linux@arm.linux.org.uk, nsekhar@ti.com, kishon@ti.com List-Id: linux-mmc@vger.kernel.org MMC1 supports SDR104 and MMC2 supports HS200 both of which requires 192MHz clock. Set the maximum operating clock frequency to 192 MHz. Signed-off-by: Kishon Vijay Abraham I --- arch/arm/boot/dts/dra72-evm.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index 3998d37..c5d8e7d 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -508,6 +508,7 @@ * is a viable alternative */ cd-gpios = <&gpio6 27 0>; + max-frequency = <192000000>; }; &mmc2 { @@ -519,6 +520,7 @@ vmmc-supply = <&evm_3v3>; bus-width = <8>; ti,non-removable; + max-frequency = <192000000>; }; &dra7_pmx_core { -- 1.7.9.5