linux-mmc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Yangbo Lu <yangbo.lu@freescale.com>
To: scottwood@freescale.com, linux-mmc@vger.kernel.org,
	ulf.hansson@linaro.org
Cc: X.Xie@freescale.com, LeoLi@freescale.com,
	Yangbo Lu <yangbo.lu@freescale.com>
Subject: [v4, 3/6] powerpc/fsl: move mpc85xx.h to include/linux
Date: Mon, 14 Dec 2015 12:24:24 +0800	[thread overview]
Message-ID: <1450067067-44869-4-git-send-email-yangbo.lu@freescale.com> (raw)
In-Reply-To: <1450067067-44869-1-git-send-email-yangbo.lu@freescale.com>

Move mpc85xx.h to include/linux and rename it to svr.h as
a common header file. It has been used for mpc85xx and it will
be used for ARM-based SoC as well.

Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com>
---
Changes for v2:
	- None
Changes for v3:
	- None
Changes for v4:
	- None
---
 drivers/clk/clk-qoriq.c                                   | 2 +-
 drivers/i2c/busses/i2c-mpc.c                              | 2 +-
 drivers/iommu/fsl_pamu.c                                  | 2 +-
 drivers/net/ethernet/freescale/gianfar.c                  | 2 +-
 arch/powerpc/include/asm/mpc85xx.h => include/linux/svr.h | 4 ++--
 5 files changed, 6 insertions(+), 6 deletions(-)
 rename arch/powerpc/include/asm/mpc85xx.h => include/linux/svr.h (97%)

diff --git a/drivers/clk/clk-qoriq.c b/drivers/clk/clk-qoriq.c
index 1ab0fb8..98c5ae0 100644
--- a/drivers/clk/clk-qoriq.c
+++ b/drivers/clk/clk-qoriq.c
@@ -1146,7 +1146,7 @@ bad_args:
 }
 
 #ifdef CONFIG_PPC
-#include <asm/mpc85xx.h>
+#include <linux/svr.h>
 
 static const u32 a4510_svrs[] __initconst = {
 	(SVR_P2040 << 8) | 0x10,	/* P2040 1.0 */
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 48ecffe..24b5bc7 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -27,9 +27,9 @@
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
+#include <linux/svr.h>
 
 #include <asm/mpc52xx.h>
-#include <asm/mpc85xx.h>
 #include <sysdev/fsl_soc.h>
 
 #define DRV_NAME "mpc-i2c"
diff --git a/drivers/iommu/fsl_pamu.c b/drivers/iommu/fsl_pamu.c
index a34355f..b014b63 100644
--- a/drivers/iommu/fsl_pamu.c
+++ b/drivers/iommu/fsl_pamu.c
@@ -24,7 +24,7 @@
 #include <linux/interrupt.h>
 #include <linux/genalloc.h>
 
-#include <asm/mpc85xx.h>
+#include <linux/svr.h>
 
 /* define indexes for each operation mapping scenario */
 #define OMI_QMAN        0x00
diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index 3e6b9b4..9b2d641 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -90,7 +90,7 @@
 #include <asm/io.h>
 #ifdef CONFIG_PPC
 #include <asm/reg.h>
-#include <asm/mpc85xx.h>
+#include <linux/svr.h>
 #endif
 #include <asm/irq.h>
 #include <asm/uaccess.h>
diff --git a/arch/powerpc/include/asm/mpc85xx.h b/include/linux/svr.h
similarity index 97%
rename from arch/powerpc/include/asm/mpc85xx.h
rename to include/linux/svr.h
index 213f3a8..531b5a9 100644
--- a/arch/powerpc/include/asm/mpc85xx.h
+++ b/include/linux/svr.h
@@ -9,8 +9,8 @@
  * (at your option) any later version.
  */
 
-#ifndef __ASM_PPC_MPC85XX_H
-#define __ASM_PPC_MPC85XX_H
+#ifndef __SVR_H__
+#define __SVR_H__
 
 #define SVR_REV(svr)	((svr) & 0xFF)		/* SOC design resision */
 #define SVR_MAJ(svr)	(((svr) >>  4) & 0xF)	/* Major revision field*/
-- 
2.1.0.27.g96db324


  parent reply	other threads:[~2015-12-14  4:47 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-14  4:24 [v4, 0/6] eSDHC patches introduction Yangbo Lu
2015-12-14  4:24 ` [v4, 1/6] soc: fsl: add GUTS driver for QorIQ platforms Yangbo Lu
2015-12-14 22:07   ` Scott Wood
2015-12-14  4:24 ` [v4, 2/6] dt: move guts devicetree doc out of powerpc directory Yangbo Lu
2015-12-14 22:10   ` Scott Wood
2015-12-14  4:24 ` Yangbo Lu [this message]
2015-12-14 22:12   ` [v4, 3/6] powerpc/fsl: move mpc85xx.h to include/linux Scott Wood
2015-12-14  4:24 ` [v4, 4/6] mmc: sdhci-of-esdhc: get SVR from global utilities registers Yangbo Lu
2015-12-14  4:24 ` [v4, 5/6] mmc: kconfig: select FSL_GUTS for MMC_SDHCI_OF_ESDHC Yangbo Lu
2015-12-14 13:08   ` Ulf Hansson
2015-12-14 18:04     ` Scott Wood
2015-12-15  9:46       ` Ulf Hansson
2015-12-16 22:48         ` Scott Wood
2015-12-17 11:25           ` Ulf Hansson
2015-12-28 19:03             ` Scott Wood
2015-12-17 11:30         ` Ulf Hansson
2015-12-28 10:26           ` Yangbo Lu
2015-12-28 12:10             ` Ulf Hansson
2015-12-28 19:10               ` Scott Wood
2016-01-06  6:58                 ` Yangbo Lu
     [not found]                   ` <AM3PR04MB530AAF1632EA442F05C95BF91F50@AM3PR04MB530.eurprd04.prod.outlook.com>
     [not found]                     ` <HE1PR04MB0889197B75CA5C8FDB793F87F8F60@HE1PR04MB0889.eurprd04.prod.outlook.com>
2016-01-08  6:34                       ` Scott Wood
2016-01-06  7:34                 ` Yangbo Lu
2016-01-06  7:23               ` Yangbo Lu
2015-12-28 18:47           ` Scott Wood
2016-01-06  7:18             ` Yangbo Lu
2016-01-14 10:31               ` Ulf Hansson
2016-01-08  6:24             ` Yangbo Lu
2015-12-14 22:14   ` Scott Wood
2015-12-14  4:24 ` [v4, 6/6] mmc: sdhci-of-esdhc: fix host version for T4240-R1.0-R2.0 Yangbo Lu
2015-12-14 12:22 ` [v4, 0/6] eSDHC patches introduction Ulf Hansson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1450067067-44869-4-git-send-email-yangbo.lu@freescale.com \
    --to=yangbo.lu@freescale.com \
    --cc=LeoLi@freescale.com \
    --cc=X.Xie@freescale.com \
    --cc=linux-mmc@vger.kernel.org \
    --cc=scottwood@freescale.com \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).