From: Adrian Hunter <adrian.hunter@intel.com>
To: Ulf Hansson <ulf.hansson@linaro.org>
Cc: linux-mmc <linux-mmc@vger.kernel.org>,
Lakshmi Sai Krishna Potthuri
<lakshmi.sai.krishna.potthuri@xilinx.com>,
"Ivan T. Ivanov" <ivan.ivanov@linaro.org>,
Russell King <linux@arm.linux.org.uk>
Subject: [PATCH 2/3] mmc: sdhci-pci: Fix card detect race for Intel BXT/APL
Date: Fri, 22 Jan 2016 11:45:01 +0200 [thread overview]
Message-ID: <1453455902-3987-3-git-send-email-adrian.hunter@intel.com> (raw)
In-Reply-To: <1453455902-3987-1-git-send-email-adrian.hunter@intel.com>
Intel BXT/APL use a card detect GPIO however the host controller
will not enable bus power unless it's card detect also reflects
the presence of a card. Unfortunately those 2 things race which
can result in commands not starting, after which the controller
does nothing and there is a 10 second wait for the driver's
10-second timer to timeout.
That is fixed by having the driver look also at the present state
register to determine if the card is present. Consequently, provide
a 'get_cd' sdhci host operation for BXT/APL that does that.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org # v4.4+
---
drivers/mmc/host/sdhci-pci-core.c | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c
index cc851b065d0a..c92652142860 100644
--- a/drivers/mmc/host/sdhci-pci-core.c
+++ b/drivers/mmc/host/sdhci-pci-core.c
@@ -330,6 +330,18 @@ static void spt_read_drive_strength(struct sdhci_host *host)
sdhci_pci_spt_drive_strength = 0x10 | ((val >> 12) & 0xf);
}
+static int bxt_get_cd(struct sdhci_host *host)
+{
+ int gpio_cd = mmc_gpio_get_cd(host->mmc);
+
+ if (!gpio_cd)
+ return 0;
+
+ return !!(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT);
+}
+
+static const struct sdhci_ops bxt_ops;
+
static int byt_emmc_probe_slot(struct sdhci_pci_slot *slot)
{
slot->host->mmc->caps |= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE |
@@ -362,6 +374,10 @@ static int byt_sd_probe_slot(struct sdhci_pci_slot *slot)
slot->cd_con_id = NULL;
slot->cd_idx = 0;
slot->cd_override_level = true;
+ if (slot->chip->pdev->device == PCI_DEVICE_ID_INTEL_BXT_SD ||
+ slot->chip->pdev->device == PCI_DEVICE_ID_INTEL_APL_SD)
+ slot->host->ops = &bxt_ops;
+
return 0;
}
@@ -1362,6 +1378,17 @@ static int sdhci_pci_select_drive_strength(struct sdhci_host *host,
card_drv, drv_type);
}
+static const struct sdhci_ops bxt_ops = {
+ .set_clock = sdhci_set_clock,
+ .enable_dma = sdhci_pci_enable_dma,
+ .set_bus_width = sdhci_pci_set_bus_width,
+ .reset = sdhci_reset,
+ .set_uhs_signaling = sdhci_set_uhs_signaling,
+ .hw_reset = sdhci_pci_hw_reset,
+ .select_drive_strength = sdhci_pci_select_drive_strength,
+ .get_cd = bxt_get_cd,
+};
+
static const struct sdhci_ops sdhci_pci_ops = {
.set_clock = sdhci_set_clock,
.enable_dma = sdhci_pci_enable_dma,
--
1.9.1
next prev parent reply other threads:[~2016-01-22 9:48 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-22 9:44 [PATCH 0/3] mmc: sdhci: Fix card detect race for Intel BXT/APL Adrian Hunter
2016-01-22 9:45 ` [PATCH 1/3] mmc: sdhci: Add get_cd sdhci host operation Adrian Hunter
2016-01-22 12:07 ` Ulf Hansson
2016-01-22 14:58 ` Adrian Hunter
2016-01-22 9:45 ` Adrian Hunter [this message]
2016-01-22 9:45 ` [PATCH 3/3] mmc: sdhci-acpi: Fix card detect race for Intel BXT/APL Adrian Hunter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1453455902-3987-3-git-send-email-adrian.hunter@intel.com \
--to=adrian.hunter@intel.com \
--cc=ivan.ivanov@linaro.org \
--cc=lakshmi.sai.krishna.potthuri@xilinx.com \
--cc=linux-mmc@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).