From: Haibo Chen <haibo.chen@nxp.com>
To: ulf.hansson@linaro.org
Cc: rmk+kernel@arm.linux.org.uk, haibo.chen@nxp.com,
linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] mmc: sdhci: disable irq in sdhci host suspend ranther than free this irq
Date: Thu, 28 Jan 2016 17:42:26 +0800 [thread overview]
Message-ID: <1453974146-20951-1-git-send-email-haibo.chen@nxp.com> (raw)
Currently sdhci driver free irq in host suspend, and call
request_threaded_irq() in host resume. But during host resume,
Ctrl+C can impact sdhci host resume, see the error log:
CPU1 is up
PM: noirq resume of devices complete after 0.637 msecs imx-sdma 30bd0000.sdma: loaded firmware 4.1
PM: early resume of devices complete after 0.774 msecs
dpm_run_callback(): platform_pm_resume+0x0/0x44 returns -4
PM: Device 30b40000.usdhc failed to resume: error -4
dpm_run_callback(): platform_pm_resume+0x0/0x44 returns -4
PM: Device 30b50000.usdhc failed to resume: error -4
dpm_run_callback(): platform_pm_resume+0x0/0x44 returns -4
PM: Device 30b60000.usdhc failed to resume: error -4 fec 30be0000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
mmc0: Timeout waiting for hardware interrupt.
mmc0: Timeout waiting for hardware interrupt.
mmc0: Timeout waiting for hardware interrupt.
mmc0: Timeout waiting for hardware interrupt.
mmc0: Timeout waiting for hardware interrupt.
mmc0: Timeout waiting for hardware interrupt.
mmc0: error -110 during resume (card was removed?)
mmc2: Timeout waiting for hardware interrupt.
mmc2: Timeout waiting for hardware interrupt.
mmc2: error -110 during resume (card was removed?)
In request_threaded_irq-> __setup_irq-> kthread_create
->kthread_create_on_node, the comment shows that SIGKILLed will
impact the kthread create, and return -EINTR.
This patch replace them with disable|enable_irq(), that will prevent
IRQs from being propagated to the sdhci driver.
Fixes: 781e989cf593 ("mmc: sdhci: convert to new SDIO IRQ handling")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
---
drivers/mmc/host/sdhci.c | 12 +++---------
1 file changed, 3 insertions(+), 9 deletions(-)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index d622435..4b1646b 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -2686,7 +2686,7 @@ int sdhci_suspend_host(struct sdhci_host *host)
host->ier = 0;
sdhci_writel(host, 0, SDHCI_INT_ENABLE);
sdhci_writel(host, 0, SDHCI_SIGNAL_ENABLE);
- free_irq(host->irq, host);
+ disable_irq(host->irq);
} else {
sdhci_enable_irq_wakeups(host);
enable_irq_wake(host->irq);
@@ -2698,8 +2698,6 @@ EXPORT_SYMBOL_GPL(sdhci_suspend_host);
int sdhci_resume_host(struct sdhci_host *host)
{
- int ret = 0;
-
if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
if (host->ops->enable_dma)
host->ops->enable_dma(host);
@@ -2718,11 +2716,7 @@ int sdhci_resume_host(struct sdhci_host *host)
}
if (!device_may_wakeup(mmc_dev(host->mmc))) {
- ret = request_threaded_irq(host->irq, sdhci_irq,
- sdhci_thread_irq, IRQF_SHARED,
- mmc_hostname(host->mmc), host);
- if (ret)
- return ret;
+ enable_irq(host->irq);
} else {
sdhci_disable_irq_wakeups(host);
disable_irq_wake(host->irq);
@@ -2730,7 +2724,7 @@ int sdhci_resume_host(struct sdhci_host *host)
sdhci_enable_card_detection(host);
- return ret;
+ return 0;
}
EXPORT_SYMBOL_GPL(sdhci_resume_host);
--
1.9.1
next reply other threads:[~2016-01-28 10:10 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-28 9:42 Haibo Chen [this message]
2016-01-28 10:20 ` [PATCH] mmc: sdhci: disable irq in sdhci host suspend ranther than free this irq Russell King - ARM Linux
2016-01-28 15:47 ` Ulf Hansson
2016-01-28 16:21 ` Thomas Gleixner
2016-01-28 16:27 ` Thomas Gleixner
2017-12-27 2:54 ` Peng Fan
2021-06-11 14:22 ` Martin Kaiser
2016-01-28 16:38 ` Russell King - ARM Linux
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1453974146-20951-1-git-send-email-haibo.chen@nxp.com \
--to=haibo.chen@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=rmk+kernel@arm.linux.org.uk \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox