* [RESEND PATCH V5 0/2] Add SDHCI driver for Broadcom BRCMSTB/BMIPS Soc's
@ 2016-06-13 12:18 Al Cooper
2016-06-13 12:18 ` [RESEND PATCH V5 1/2] mmc: sdhci-brcmstb: Add driver for Broadcom BRCMSTB SoCs Al Cooper
2016-06-13 12:19 ` [RESEND PATCH V5 2/2] mmc: DT: sdhci-brcmstb: Add device tree bindings Al Cooper
0 siblings, 2 replies; 5+ messages in thread
From: Al Cooper @ 2016-06-13 12:18 UTC (permalink / raw)
To: ulf.hansson, adrian.hunter, linux-mmc, bcm-kernel-feedback-list; +Cc: Al Cooper
V5 - Don't create new device tree properties to disable broken UHS
modes. Use devm_clk_get() to get clk and change
clk_enable/clk_disable to clk_prepare_enable/clk_disable_unprepare
V4 - Change the DT compatible property to "brcm,bcm7425-sdhci".
Add "clocks" property to DT bindings document.
V3 - Don't add new QUIRKS to workaround Host Controller issues.
It turns out that all the issues could be solved by using
SDHCI_QUIRK_MISSING_CAPS to supply modified "caps" and "caps1"
Host Controller registers.
Al Cooper (2):
mmc: sdhci-brcmstb: Add driver for Broadcom BRCMSTB SoCs
mmc: DT: sdhci-brcmstb: Add device tree bindings
.../devicetree/bindings/mmc/brcm,bcm7425-sdhci.txt | 32 +++++
MAINTAINERS | 7 ++
drivers/mmc/host/Kconfig | 11 ++
drivers/mmc/host/Makefile | 1 +
drivers/mmc/host/sdhci-brcmstb.c | 137 +++++++++++++++++++++
5 files changed, 188 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mmc/brcm,bcm7425-sdhci.txt
create mode 100644 drivers/mmc/host/sdhci-brcmstb.c
--
1.9.0.138.g2de3478
^ permalink raw reply [flat|nested] 5+ messages in thread* [RESEND PATCH V5 1/2] mmc: sdhci-brcmstb: Add driver for Broadcom BRCMSTB SoCs 2016-06-13 12:18 [RESEND PATCH V5 0/2] Add SDHCI driver for Broadcom BRCMSTB/BMIPS Soc's Al Cooper @ 2016-06-13 12:18 ` Al Cooper 2016-06-14 8:10 ` Adrian Hunter 2016-06-13 12:19 ` [RESEND PATCH V5 2/2] mmc: DT: sdhci-brcmstb: Add device tree bindings Al Cooper 1 sibling, 1 reply; 5+ messages in thread From: Al Cooper @ 2016-06-13 12:18 UTC (permalink / raw) To: ulf.hansson, adrian.hunter, linux-mmc, bcm-kernel-feedback-list; +Cc: Al Cooper Signed-off-by: Al Cooper <alcooperx@gmail.com> --- MAINTAINERS | 7 ++ drivers/mmc/host/Kconfig | 11 ++++ drivers/mmc/host/Makefile | 1 + drivers/mmc/host/sdhci-brcmstb.c | 137 +++++++++++++++++++++++++++++++++++++++ 4 files changed, 156 insertions(+) create mode 100644 drivers/mmc/host/sdhci-brcmstb.c diff --git a/MAINTAINERS b/MAINTAINERS index 7304d2e..e5528cf 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -10187,6 +10187,13 @@ F: tools/testing/selftests/seccomp/* K: \bsecure_computing K: \bTIF_SECCOMP\b +SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) Broadcom BRCMSTB DRIVER +M: Al Cooper <alcooperx@gmail.com> +L: linux-mmc@vger.kernel.org +L: bcm-kernel-feedback-list@broadcom.com +S: Maintained +F: drivers/mmc/host/sdhci-brcmstb* + SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) SAMSUNG DRIVER M: Ben Dooks <ben-linux@fluff.org> M: Jaehoon Chung <jh80.chung@samsung.com> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 0aa484c..1038c9a 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -798,3 +798,14 @@ config MMC_SDHCI_MICROCHIP_PIC32 If you have a controller with this interface, say Y or M here. If unsure, say N. +config MMC_SDHCI_BRCMSTB + tristate "Broadcom SDIO/SD/MMC support" + depends on ARCH_BRCMSTB || BMIPS_GENERIC + depends on MMC_SDHCI_PLTFM + default y + select MMC_SDHCI_IO_ACCESSORS + help + This selects support for the SDIO/SD/MMC Host Controller on + Broadcom STB SoCs. + + If unsure, say Y. diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index af918d2..2075c11 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -76,6 +76,7 @@ obj-$(CONFIG_MMC_SDHCI_IPROC) += sdhci-iproc.o obj-$(CONFIG_MMC_SDHCI_MSM) += sdhci-msm.o obj-$(CONFIG_MMC_SDHCI_ST) += sdhci-st.o obj-$(CONFIG_MMC_SDHCI_MICROCHIP_PIC32) += sdhci-pic32.o +obj-$(CONFIG_MMC_SDHCI_BRCMSTB) += sdhci-brcmstb.o ifeq ($(CONFIG_CB710_DEBUG),y) CFLAGS-cb710-mmc += -DDEBUG diff --git a/drivers/mmc/host/sdhci-brcmstb.c b/drivers/mmc/host/sdhci-brcmstb.c new file mode 100644 index 0000000..38882ef --- /dev/null +++ b/drivers/mmc/host/sdhci-brcmstb.c @@ -0,0 +1,137 @@ +/* + * sdhci-brcmstb.c Support for SDHCI on Broadcom BRCMSTB SoC's + * + * Copyright (C) 2015 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/io.h> +#include <linux/mmc/host.h> +#include <linux/module.h> +#include <linux/of.h> + +#include "sdhci-pltfm.h" + +#ifdef CONFIG_PM_SLEEP + +static int sdhci_brcmstb_suspend(struct device *dev) +{ + struct sdhci_host *host = dev_get_drvdata(dev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + int res; + + res = sdhci_suspend_host(host); + if (res) + return res; + clk_disable_unprepare(pltfm_host->clk); + return res; +} + +static int sdhci_brcmstb_resume(struct device *dev) +{ + struct sdhci_host *host = dev_get_drvdata(dev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + int err; + + err = clk_prepare_enable(pltfm_host->clk); + if (err) + return err; + return sdhci_resume_host(host); +} + +#endif /* CONFIG_PM_SLEEP */ + +static SIMPLE_DEV_PM_OPS(sdhci_brcmstb_pmops, sdhci_brcmstb_suspend, + sdhci_brcmstb_resume); + +static const struct sdhci_ops sdhci_brcmstb_ops = { + .set_clock = sdhci_set_clock, + .set_bus_width = sdhci_set_bus_width, + .reset = sdhci_reset, + .set_uhs_signaling = sdhci_set_uhs_signaling, +}; + +static struct sdhci_pltfm_data sdhci_brcmstb_pdata = { + .ops = &sdhci_brcmstb_ops, +}; + +static int sdhci_brcmstb_probe(struct platform_device *pdev) +{ + struct sdhci_host *host; + struct sdhci_pltfm_host *pltfm_host; + struct clk *clk; + int res; + + clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "Clock not found in Device Tree\n"); + clk = NULL; + } + res = clk_prepare_enable(clk); + if (res) + return res; + + host = sdhci_pltfm_init(pdev, &sdhci_brcmstb_pdata, 0); + if (IS_ERR(host)) + return PTR_ERR(host); + + /* Enable MMC_CAP2_HC_ERASE_SZ for better max discard calculations */ + host->mmc->caps2 |= MMC_CAP2_HC_ERASE_SZ; + + sdhci_get_of_property(pdev); + mmc_of_parse(host->mmc); + + /* + * Supply the existing CAPS, but clear the UHS modes. This + * will allow these modes to be specified by device tree + * properties through mmc_of_parse(). + */ + host->caps = sdhci_readl(host, SDHCI_CAPABILITIES); + host->caps1 = sdhci_readl(host, SDHCI_CAPABILITIES_1); + host->caps1 &= ~(SDHCI_SUPPORT_SDR50 | SDHCI_SUPPORT_SDR104 | + SDHCI_SUPPORT_DDR50); + host->quirks |= SDHCI_QUIRK_MISSING_CAPS | + SDHCI_QUIRK_BROKEN_TIMEOUT_VAL; + + res = sdhci_add_host(host); + if (res) { + sdhci_pltfm_free(pdev); + return res; + } + + pltfm_host = sdhci_priv(host); + pltfm_host->clk = clk; + return res; +} + +static const struct of_device_id sdhci_brcm_of_match[] = { + { .compatible = "brcm,bcm7425-sdhci" }, + {}, +}; +MODULE_DEVICE_TABLE(of, sdhci_brcm_of_match); + +static struct platform_driver sdhci_brcmstb_driver = { + .driver = { + .name = "sdhci-brcmstb", + .owner = THIS_MODULE, + .pm = &sdhci_brcmstb_pmops, + .of_match_table = of_match_ptr(sdhci_brcm_of_match), + }, + .probe = sdhci_brcmstb_probe, + .remove = sdhci_pltfm_unregister, +}; + +module_platform_driver(sdhci_brcmstb_driver); + +MODULE_DESCRIPTION("SDHCI driver for Broadcom BRCMSTB SoCs"); +MODULE_AUTHOR("Broadcom"); +MODULE_LICENSE("GPL v2"); -- 1.9.0.138.g2de3478 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [RESEND PATCH V5 1/2] mmc: sdhci-brcmstb: Add driver for Broadcom BRCMSTB SoCs 2016-06-13 12:18 ` [RESEND PATCH V5 1/2] mmc: sdhci-brcmstb: Add driver for Broadcom BRCMSTB SoCs Al Cooper @ 2016-06-14 8:10 ` Adrian Hunter 2016-06-14 15:21 ` Alan Cooper 0 siblings, 1 reply; 5+ messages in thread From: Adrian Hunter @ 2016-06-14 8:10 UTC (permalink / raw) To: Al Cooper, ulf.hansson, linux-mmc, bcm-kernel-feedback-list On 13/06/16 15:18, Al Cooper wrote: > Signed-off-by: Al Cooper <alcooperx@gmail.com> The absence of a commit message is a red flag to some people. You could write, for example, whether the driver is missing any features that still need to be added. > --- > MAINTAINERS | 7 ++ > drivers/mmc/host/Kconfig | 11 ++++ > drivers/mmc/host/Makefile | 1 + > drivers/mmc/host/sdhci-brcmstb.c | 137 +++++++++++++++++++++++++++++++++++++++ > 4 files changed, 156 insertions(+) > create mode 100644 drivers/mmc/host/sdhci-brcmstb.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index 7304d2e..e5528cf 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -10187,6 +10187,13 @@ F: tools/testing/selftests/seccomp/* > K: \bsecure_computing > K: \bTIF_SECCOMP\b > > +SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) Broadcom BRCMSTB DRIVER > +M: Al Cooper <alcooperx@gmail.com> > +L: linux-mmc@vger.kernel.org > +L: bcm-kernel-feedback-list@broadcom.com > +S: Maintained > +F: drivers/mmc/host/sdhci-brcmstb* > + > SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) SAMSUNG DRIVER > M: Ben Dooks <ben-linux@fluff.org> > M: Jaehoon Chung <jh80.chung@samsung.com> > diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig > index 0aa484c..1038c9a 100644 > --- a/drivers/mmc/host/Kconfig > +++ b/drivers/mmc/host/Kconfig > @@ -798,3 +798,14 @@ config MMC_SDHCI_MICROCHIP_PIC32 > If you have a controller with this interface, say Y or M here. > > If unsure, say N. > +config MMC_SDHCI_BRCMSTB > + tristate "Broadcom SDIO/SD/MMC support" > + depends on ARCH_BRCMSTB || BMIPS_GENERIC > + depends on MMC_SDHCI_PLTFM > + default y > + select MMC_SDHCI_IO_ACCESSORS > + help > + This selects support for the SDIO/SD/MMC Host Controller on > + Broadcom STB SoCs. > + > + If unsure, say Y. > diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile > index af918d2..2075c11 100644 > --- a/drivers/mmc/host/Makefile > +++ b/drivers/mmc/host/Makefile > @@ -76,6 +76,7 @@ obj-$(CONFIG_MMC_SDHCI_IPROC) += sdhci-iproc.o > obj-$(CONFIG_MMC_SDHCI_MSM) += sdhci-msm.o > obj-$(CONFIG_MMC_SDHCI_ST) += sdhci-st.o > obj-$(CONFIG_MMC_SDHCI_MICROCHIP_PIC32) += sdhci-pic32.o > +obj-$(CONFIG_MMC_SDHCI_BRCMSTB) += sdhci-brcmstb.o > > ifeq ($(CONFIG_CB710_DEBUG),y) > CFLAGS-cb710-mmc += -DDEBUG > diff --git a/drivers/mmc/host/sdhci-brcmstb.c b/drivers/mmc/host/sdhci-brcmstb.c > new file mode 100644 > index 0000000..38882ef > --- /dev/null > +++ b/drivers/mmc/host/sdhci-brcmstb.c > @@ -0,0 +1,137 @@ > +/* > + * sdhci-brcmstb.c Support for SDHCI on Broadcom BRCMSTB SoC's > + * > + * Copyright (C) 2015 Broadcom Corporation > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + */ > + > +#include <linux/io.h> > +#include <linux/mmc/host.h> > +#include <linux/module.h> > +#include <linux/of.h> > + > +#include "sdhci-pltfm.h" > + > +#ifdef CONFIG_PM_SLEEP > + > +static int sdhci_brcmstb_suspend(struct device *dev) > +{ > + struct sdhci_host *host = dev_get_drvdata(dev); > + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); > + int res; > + > + res = sdhci_suspend_host(host); > + if (res) > + return res; > + clk_disable_unprepare(pltfm_host->clk); > + return res; > +} > + > +static int sdhci_brcmstb_resume(struct device *dev) > +{ > + struct sdhci_host *host = dev_get_drvdata(dev); > + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); > + int err; > + > + err = clk_prepare_enable(pltfm_host->clk); > + if (err) > + return err; > + return sdhci_resume_host(host); > +} > + > +#endif /* CONFIG_PM_SLEEP */ > + > +static SIMPLE_DEV_PM_OPS(sdhci_brcmstb_pmops, sdhci_brcmstb_suspend, > + sdhci_brcmstb_resume); > + > +static const struct sdhci_ops sdhci_brcmstb_ops = { > + .set_clock = sdhci_set_clock, > + .set_bus_width = sdhci_set_bus_width, > + .reset = sdhci_reset, > + .set_uhs_signaling = sdhci_set_uhs_signaling, > +}; > + > +static struct sdhci_pltfm_data sdhci_brcmstb_pdata = { > + .ops = &sdhci_brcmstb_ops, > +}; > + > +static int sdhci_brcmstb_probe(struct platform_device *pdev) > +{ > + struct sdhci_host *host; > + struct sdhci_pltfm_host *pltfm_host; > + struct clk *clk; > + int res; > + > + clk = devm_clk_get(&pdev->dev, NULL); > + if (IS_ERR(clk)) { > + dev_err(&pdev->dev, "Clock not found in Device Tree\n"); > + clk = NULL; > + } > + res = clk_prepare_enable(clk); > + if (res) > + return res; > + > + host = sdhci_pltfm_init(pdev, &sdhci_brcmstb_pdata, 0); > + if (IS_ERR(host)) Don't you need clk_disable_unprepare(clk) here. > + return PTR_ERR(host); > + > + /* Enable MMC_CAP2_HC_ERASE_SZ for better max discard calculations */ > + host->mmc->caps2 |= MMC_CAP2_HC_ERASE_SZ; > + > + sdhci_get_of_property(pdev); > + mmc_of_parse(host->mmc); > + > + /* > + * Supply the existing CAPS, but clear the UHS modes. This > + * will allow these modes to be specified by device tree > + * properties through mmc_of_parse(). > + */ > + host->caps = sdhci_readl(host, SDHCI_CAPABILITIES); > + host->caps1 = sdhci_readl(host, SDHCI_CAPABILITIES_1); > + host->caps1 &= ~(SDHCI_SUPPORT_SDR50 | SDHCI_SUPPORT_SDR104 | > + SDHCI_SUPPORT_DDR50); > + host->quirks |= SDHCI_QUIRK_MISSING_CAPS | > + SDHCI_QUIRK_BROKEN_TIMEOUT_VAL; > + > + res = sdhci_add_host(host); > + if (res) { And here > + sdhci_pltfm_free(pdev); > + return res; > + } > + > + pltfm_host = sdhci_priv(host); > + pltfm_host->clk = clk; > + return res; > +} > + > +static const struct of_device_id sdhci_brcm_of_match[] = { > + { .compatible = "brcm,bcm7425-sdhci" }, > + {}, > +}; > +MODULE_DEVICE_TABLE(of, sdhci_brcm_of_match); > + > +static struct platform_driver sdhci_brcmstb_driver = { > + .driver = { > + .name = "sdhci-brcmstb", > + .owner = THIS_MODULE, > + .pm = &sdhci_brcmstb_pmops, > + .of_match_table = of_match_ptr(sdhci_brcm_of_match), > + }, > + .probe = sdhci_brcmstb_probe, > + .remove = sdhci_pltfm_unregister, > +}; > + > +module_platform_driver(sdhci_brcmstb_driver); > + > +MODULE_DESCRIPTION("SDHCI driver for Broadcom BRCMSTB SoCs"); > +MODULE_AUTHOR("Broadcom"); > +MODULE_LICENSE("GPL v2"); > ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [RESEND PATCH V5 1/2] mmc: sdhci-brcmstb: Add driver for Broadcom BRCMSTB SoCs 2016-06-14 8:10 ` Adrian Hunter @ 2016-06-14 15:21 ` Alan Cooper 0 siblings, 0 replies; 5+ messages in thread From: Alan Cooper @ 2016-06-14 15:21 UTC (permalink / raw) To: Adrian Hunter; +Cc: Ulf Hansson, linux-mmc, bcm-kernel-feedback-list On Tue, Jun 14, 2016 at 4:10 AM, Adrian Hunter <adrian.hunter@intel.com> wrote: > The absence of a commit message is a red flag to some people. You could > write, for example, whether the driver is missing any features that still > need to be added. I'll improve my commit messages. > Don't you need clk_disable_unprepare(clk) here. Yes, I'll add this to the error paths that need it. Thanks Adrian Al ^ permalink raw reply [flat|nested] 5+ messages in thread
* [RESEND PATCH V5 2/2] mmc: DT: sdhci-brcmstb: Add device tree bindings 2016-06-13 12:18 [RESEND PATCH V5 0/2] Add SDHCI driver for Broadcom BRCMSTB/BMIPS Soc's Al Cooper 2016-06-13 12:18 ` [RESEND PATCH V5 1/2] mmc: sdhci-brcmstb: Add driver for Broadcom BRCMSTB SoCs Al Cooper @ 2016-06-13 12:19 ` Al Cooper 1 sibling, 0 replies; 5+ messages in thread From: Al Cooper @ 2016-06-13 12:19 UTC (permalink / raw) To: ulf.hansson, adrian.hunter, linux-mmc, bcm-kernel-feedback-list; +Cc: Al Cooper Signed-off-by: Al Cooper <alcooperx@gmail.com> --- .../devicetree/bindings/mmc/brcm,bcm7425-sdhci.txt | 32 ++++++++++++++++++++++ 1 file changed, 32 insertions(+) create mode 100644 Documentation/devicetree/bindings/mmc/brcm,bcm7425-sdhci.txt diff --git a/Documentation/devicetree/bindings/mmc/brcm,bcm7425-sdhci.txt b/Documentation/devicetree/bindings/mmc/brcm,bcm7425-sdhci.txt new file mode 100644 index 0000000..4c73671 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/brcm,bcm7425-sdhci.txt @@ -0,0 +1,32 @@ +* BROADCOM BRCMSTB/BMIPS SDHCI Controller + +This file documents differences between the core properties in mmc.txt +and the properties used by the sdhci-brcmstb driver. + +Required properties: +- compatible: "brcm,bcm7425-sdhci" + +Refer to clocks/clock-bindings.txt for generic clock consumer properties. + +Example: + + sdhci@f03e0100 { + compatible = "brcm,bcm7425-sdhci"; + reg = <0xf03e0000 0x100>; + interrupts = <0x0 0x26 0x0>; + sdhci,auto-cmd12; + clocks = <&sw_sdio>; + sd-uhs-sdr50; + sd-uhs-ddr50; + }; + + sdhci@f03e0300 { + non-removable; + bus-width = <0x8>; + compatible = "brcm,bcm7425-sdhci"; + reg = <0xf03e0200 0x100>; + interrupts = <0x0 0x27 0x0>; + sdhci,auto-cmd12; + clocks = <sw_sdio>; + mmc-hs200-1_8v; + }; -- 1.9.0.138.g2de3478 ^ permalink raw reply related [flat|nested] 5+ messages in thread
end of thread, other threads:[~2016-06-14 15:21 UTC | newest] Thread overview: 5+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2016-06-13 12:18 [RESEND PATCH V5 0/2] Add SDHCI driver for Broadcom BRCMSTB/BMIPS Soc's Al Cooper 2016-06-13 12:18 ` [RESEND PATCH V5 1/2] mmc: sdhci-brcmstb: Add driver for Broadcom BRCMSTB SoCs Al Cooper 2016-06-14 8:10 ` Adrian Hunter 2016-06-14 15:21 ` Alan Cooper 2016-06-13 12:19 ` [RESEND PATCH V5 2/2] mmc: DT: sdhci-brcmstb: Add device tree bindings Al Cooper
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox