From: Adrian Hunter <adrian.hunter@intel.com>
To: Ulf Hansson <ulf.hansson@linaro.org>
Cc: linux-mmc <linux-mmc@vger.kernel.org>,
Alex Lemberg <alex.lemberg@sandisk.com>,
Mateusz Nowak <mateusz.nowak@intel.com>,
Yuliy Izrailov <Yuliy.Izrailov@sandisk.com>,
Jaehoon Chung <jh80.chung@samsung.com>,
Dong Aisheng <dongas86@gmail.com>,
Das Asutosh <asutoshd@codeaurora.org>,
Zhangfei Gao <zhangfei.gao@gmail.com>,
Dorfman Konstantin <kdorfman@codeaurora.org>,
David Griego <david.griego@linaro.org>,
Sahitya Tummala <stummala@codeaurora.org>,
Harjani Ritesh <riteshh@codeaurora.org>,
Venu Byravarasu <vbyravarasu@nvidia.com>
Subject: [PATCH V4 14/30] mmc: mmc: Add Command Queue definitions
Date: Tue, 16 Aug 2016 13:44:24 +0300 [thread overview]
Message-ID: <1471344280-16663-15-git-send-email-adrian.hunter@intel.com> (raw)
In-Reply-To: <1471344280-16663-1-git-send-email-adrian.hunter@intel.com>
Add definitions relating to Command Queuing.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
---
Documentation/mmc/mmc-dev-attrs.txt | 1 +
drivers/mmc/core/mmc.c | 19 +++++++++++++++++++
include/linux/mmc/card.h | 3 +++
include/linux/mmc/mmc.h | 17 +++++++++++++++++
4 files changed, 40 insertions(+)
diff --git a/Documentation/mmc/mmc-dev-attrs.txt b/Documentation/mmc/mmc-dev-attrs.txt
index 404a0e9e92b0..dcd1252877fb 100644
--- a/Documentation/mmc/mmc-dev-attrs.txt
+++ b/Documentation/mmc/mmc-dev-attrs.txt
@@ -30,6 +30,7 @@ All attributes are read-only.
rel_sectors Reliable write sector count
ocr Operation Conditions Register
dsr Driver Stage Register
+ cmdq_en Command Queue enabled: 1 => enabled, 0 => not enabled
Note on Erase Size and Preferred Erase Size:
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index f2d185cf8a8b..3f2d9d8e4d6c 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -615,6 +615,23 @@ static int mmc_decode_ext_csd(struct mmc_card *card, u8 *ext_csd)
(ext_csd[EXT_CSD_SUPPORTED_MODE] & 0x1) &&
!(ext_csd[EXT_CSD_FW_CONFIG] & 0x1);
}
+
+ /* eMMC v5.1 or later */
+ if (card->ext_csd.rev >= 8) {
+ card->ext_csd.cmdq_support = ext_csd[EXT_CSD_CMDQ_SUPPORT] &
+ EXT_CSD_CMDQ_SUPPORTED;
+ card->ext_csd.cmdq_depth = (ext_csd[EXT_CSD_CMDQ_DEPTH] &
+ EXT_CSD_CMDQ_DEPTH_MASK) + 1;
+ if (card->ext_csd.cmdq_depth <= 2) {
+ card->ext_csd.cmdq_support = false;
+ card->ext_csd.cmdq_depth = 0;
+ }
+ if (card->ext_csd.cmdq_support) {
+ pr_debug("%s: Command Queue supported depth %u\n",
+ mmc_hostname(card->host),
+ card->ext_csd.cmdq_depth);
+ }
+ }
out:
return err;
}
@@ -750,6 +767,7 @@ MMC_DEV_ATTR(enhanced_area_size, "%u\n", card->ext_csd.enhanced_area_size);
MMC_DEV_ATTR(raw_rpmb_size_mult, "%#x\n", card->ext_csd.raw_rpmb_size_mult);
MMC_DEV_ATTR(rel_sectors, "%#x\n", card->ext_csd.rel_sectors);
MMC_DEV_ATTR(ocr, "%08x\n", card->ocr);
+MMC_DEV_ATTR(cmdq_en, "%d\n", card->ext_csd.cmdq_en);
static ssize_t mmc_fwrev_show(struct device *dev,
struct device_attribute *attr,
@@ -803,6 +821,7 @@ static struct attribute *mmc_std_attrs[] = {
&dev_attr_rel_sectors.attr,
&dev_attr_ocr.attr,
&dev_attr_dsr.attr,
+ &dev_attr_cmdq_en.attr,
NULL,
};
ATTRIBUTE_GROUPS(mmc_std);
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index d8673ca968ba..476ccbe3f831 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -89,6 +89,9 @@ struct mmc_ext_csd {
unsigned int boot_ro_lock; /* ro lock support */
bool boot_ro_lockable;
bool ffu_capable; /* Firmware upgrade support */
+ bool cmdq_en; /* Command Queue enabled */
+ bool cmdq_support; /* Command Queue supported */
+ unsigned int cmdq_depth; /* Command Queue depth */
#define MMC_FIRMWARE_LEN 8
u8 fwrev[MMC_FIRMWARE_LEN]; /* FW version */
u8 raw_exception_status; /* 54 */
diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
index c376209c70ef..672730acc705 100644
--- a/include/linux/mmc/mmc.h
+++ b/include/linux/mmc/mmc.h
@@ -84,6 +84,13 @@
#define MMC_APP_CMD 55 /* ac [31:16] RCA R1 */
#define MMC_GEN_CMD 56 /* adtc [0] RD/WR R1 */
+ /* class 11 */
+#define MMC_QUE_TASK_PARAMS 44 /* ac [20:16] task id R1 */
+#define MMC_QUE_TASK_ADDR 45 /* ac [31:0] data addr R1 */
+#define MMC_EXECUTE_READ_TASK 46 /* adtc [20:16] task id R1 */
+#define MMC_EXECUTE_WRITE_TASK 47 /* adtc [20:16] task id R1 */
+#define MMC_CMDQ_TASK_MGMT 48 /* ac [20:16] task id R1b */
+
static inline bool mmc_op_multi(u32 opcode)
{
return opcode == MMC_WRITE_MULTIPLE_BLOCK ||
@@ -272,6 +279,7 @@ struct _mmc_csd {
* EXT_CSD fields
*/
+#define EXT_CSD_CMDQ_MODE_EN 15 /* R/W */
#define EXT_CSD_FLUSH_CACHE 32 /* W */
#define EXT_CSD_CACHE_CTRL 33 /* R/W */
#define EXT_CSD_POWER_OFF_NOTIFICATION 34 /* R/W */
@@ -331,6 +339,8 @@ struct _mmc_csd {
#define EXT_CSD_CACHE_SIZE 249 /* RO, 4 bytes */
#define EXT_CSD_PWR_CL_DDR_200_360 253 /* RO */
#define EXT_CSD_FIRMWARE_VERSION 254 /* RO, 8 bytes */
+#define EXT_CSD_CMDQ_DEPTH 307 /* RO */
+#define EXT_CSD_CMDQ_SUPPORT 308 /* RO */
#define EXT_CSD_SUPPORTED_MODE 493 /* RO */
#define EXT_CSD_TAG_UNIT_SIZE 498 /* RO */
#define EXT_CSD_DATA_TAG_SUPPORT 499 /* RO */
@@ -438,6 +448,13 @@ struct _mmc_csd {
#define EXT_CSD_MANUAL_BKOPS_MASK 0x01
/*
+ * Command Queue
+ */
+#define EXT_CSD_CMDQ_MODE_ENABLED BIT(0)
+#define EXT_CSD_CMDQ_DEPTH_MASK GENMASK(4, 0)
+#define EXT_CSD_CMDQ_SUPPORTED BIT(0)
+
+/*
* MMC_SWITCH access modes
*/
--
1.9.1
next prev parent reply other threads:[~2016-08-16 10:50 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-16 10:44 [PATCH V4 00/30] mmc: mmc: Add Software Command Queuing Adrian Hunter
2016-08-16 10:44 ` [PATCH V4 01/30] mmc: core: Add support for sending commands during data transfer Adrian Hunter
2016-08-16 10:44 ` [PATCH V4 02/30] mmc: mmc_test: Add tests for sending commands during transfer Adrian Hunter
2016-08-16 10:44 ` [PATCH V4 03/30] mmc: sdhci: Support cap_cmd_during_tfr requests Adrian Hunter
2016-08-16 10:44 ` [PATCH V4 04/30] mmc: sdhci-pci: Set MMC_CAP_CMD_DURING_TFR for Intel eMMC controllers Adrian Hunter
2016-08-16 10:44 ` [PATCH V4 05/30] mmc: sdhci-acpi: " Adrian Hunter
2016-08-16 10:44 ` [PATCH V4 06/30] mmc: queue: Fix queue thread wake-up Adrian Hunter
2016-08-16 10:44 ` [PATCH V4 07/30] mmc: queue: Factor out mmc_queue_alloc_bounce_bufs() Adrian Hunter
2016-08-16 10:44 ` [PATCH V4 08/30] mmc: queue: Factor out mmc_queue_alloc_bounce_sgs() Adrian Hunter
2016-08-16 10:44 ` [PATCH V4 09/30] mmc: queue: Factor out mmc_queue_alloc_sgs() Adrian Hunter
2016-08-16 10:44 ` [PATCH V4 10/30] mmc: queue: Factor out mmc_queue_reqs_free_bufs() Adrian Hunter
2016-08-16 10:44 ` [PATCH V4 11/30] mmc: queue: Introduce queue depth Adrian Hunter
2016-08-16 10:44 ` [PATCH V4 12/30] mmc: queue: Use queue depth to allocate and free Adrian Hunter
2016-08-16 10:44 ` [PATCH V4 13/30] mmc: queue: Allocate queue of size qdepth Adrian Hunter
2016-08-16 10:44 ` Adrian Hunter [this message]
2016-08-16 10:44 ` [PATCH V4 15/30] mmc: mmc: Add functions to enable / disable the Command Queue Adrian Hunter
2016-08-16 10:44 ` [PATCH V4 16/30] mmc: mmc_test: Disable Command Queue while mmc_test is used Adrian Hunter
2016-08-16 10:44 ` [PATCH V4 17/30] mmc: block: Disable Command Queue while RPMB " Adrian Hunter
2016-08-16 10:44 ` [PATCH V4 18/30] mmc: core: Do not prepare a new request twice Adrian Hunter
2016-08-16 10:44 ` [PATCH V4 19/30] mmc: core: Export mmc_retune_hold() and mmc_retune_release() Adrian Hunter
2016-08-16 10:44 ` [PATCH V4 20/30] mmc: block: Factor out mmc_blk_requeue() Adrian Hunter
2016-08-16 10:44 ` [PATCH V4 21/30] mmc: block: Fix 4K native sector check Adrian Hunter
2016-08-16 10:44 ` [PATCH V4 22/30] mmc: block: Use local var for mqrq_cur Adrian Hunter
2016-08-16 10:44 ` [PATCH V4 23/30] mmc: block: Pass mqrq to mmc_blk_prep_packed_list() Adrian Hunter
2016-08-16 10:44 ` [PATCH V4 24/30] mmc: block: Introduce queue semantics Adrian Hunter
2016-08-16 10:44 ` [PATCH V4 25/30] mmc: queue: Share mmc request array between partitions Adrian Hunter
2016-08-16 10:44 ` [PATCH V4 26/30] mmc: queue: Add a function to control wake-up on new requests Adrian Hunter
2016-08-16 10:44 ` [PATCH V4 27/30] mmc: block: Add Software Command Queuing Adrian Hunter
2016-08-16 10:44 ` [PATCH V4 28/30] mmc: mmc: Enable " Adrian Hunter
2016-08-16 10:44 ` [PATCH V4 29/30] mmc: sdhci-pci: Enable Software Command Queuing for some Intel controllers Adrian Hunter
2016-08-16 10:44 ` [PATCH V4 30/30] mmc: sdhci-acpi: " Adrian Hunter
2016-09-12 12:36 ` [PATCH V4 00/30] mmc: mmc: Add Software Command Queuing Ulf Hansson
2016-09-13 9:41 ` Adrian Hunter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1471344280-16663-15-git-send-email-adrian.hunter@intel.com \
--to=adrian.hunter@intel.com \
--cc=Yuliy.Izrailov@sandisk.com \
--cc=alex.lemberg@sandisk.com \
--cc=asutoshd@codeaurora.org \
--cc=david.griego@linaro.org \
--cc=dongas86@gmail.com \
--cc=jh80.chung@samsung.com \
--cc=kdorfman@codeaurora.org \
--cc=linux-mmc@vger.kernel.org \
--cc=mateusz.nowak@intel.com \
--cc=riteshh@codeaurora.org \
--cc=stummala@codeaurora.org \
--cc=ulf.hansson@linaro.org \
--cc=vbyravarasu@nvidia.com \
--cc=zhangfei.gao@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).