linux-mmc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ritesh Harjani <riteshh@codeaurora.org>
To: ulf.hansson@linaro.org, adrian.hunter@intel.com
Cc: shawn.lin@rock-chips.com, jh80.chung@samsung.com,
	linux-mmc@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	georgi.djakov@linaro.org, alex.lemberg@sandisk.com,
	mateusz.nowak@intel.com, Yuliy.Izrailov@sandisk.com,
	asutoshd@codeaurora.org, kdorfman@codeaurora.org,
	david.griego@linaro.org, stummala@codeaurora.org,
	venkatg@codeaurora.org, Ritesh Harjani <riteshh@codeaurora.org>
Subject: [PATCH v2 6/8] mmc: sdhci-msm: Implement set_clock callback for sdhci-msm
Date: Tue, 16 Aug 2016 17:11:06 +0530	[thread overview]
Message-ID: <1471347668-22978-7-git-send-email-riteshh@codeaurora.org> (raw)
In-Reply-To: <1471347668-22978-1-git-send-email-riteshh@codeaurora.org>

sdhci-msm controller may have different clk-rates for each
bus speed mode. Thus implement set_clock callback for
sdhci-msm driver.

Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org>
---
 drivers/mmc/host/sdhci-msm.c | 103 ++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 102 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
index 9afedac..1eb5074 100644
--- a/drivers/mmc/host/sdhci-msm.c
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -89,6 +89,7 @@ struct sdhci_msm_host {
 	struct mmc_host *mmc;
 	bool use_updated_dll_reset;
 	struct sdhci_msm_pltfm_data *pdata;
+	u32 clk_rate;
 };
 
 /* Platform specific tuning */
@@ -570,6 +571,106 @@ static unsigned int sdhci_msm_get_min_clock(struct sdhci_host *host)
 	return msm_host->pdata->clk_table[0];
 }
 
+static unsigned int sdhci_msm_get_msm_clk_rate(struct sdhci_host *host,
+					u32 req_clk)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
+	int count = msm_host->pdata->clk_table_sz;
+	unsigned int sel_clk = -1;
+	int cnt;
+
+	if (req_clk < sdhci_msm_get_min_clock(host)) {
+		sel_clk = sdhci_msm_get_min_clock(host);
+		return sel_clk;
+	}
+
+	for (cnt = 0; cnt < count; cnt++) {
+		if (msm_host->pdata->clk_table[cnt] > req_clk) {
+			break;
+		} else if (msm_host->pdata->clk_table[cnt] == req_clk) {
+			sel_clk = msm_host->pdata->clk_table[cnt];
+			break;
+		} else {
+			sel_clk = msm_host->pdata->clk_table[cnt];
+		}
+	}
+	return sel_clk;
+}
+/**
+ * __sdhci_msm_set_clock - sdhci_msm clock control.
+ *
+ * Description:
+ * Implement MSM version of sdhci_set_clock.
+ * This is required since MSM controller does not
+ * use internal divider and instead directly control
+ * the GCC clock as per HW recommendation.
+ **/
+void __sdhci_msm_set_clock(struct sdhci_host *host, unsigned int clock)
+{
+	u16 clk;
+	unsigned long timeout;
+
+	host->mmc->actual_clock = 0;
+
+	sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
+
+	if (clock == 0)
+		return;
+
+	/*
+	 * MSM controller do not use clock divider.
+	 * Thus read SDHCI_CLOCK_CONTROL and only enable
+	 * clock with no divider value programmed.
+	 */
+	clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+
+	clk |= SDHCI_CLOCK_INT_EN;
+	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+
+	/* Wait max 20 ms */
+	timeout = 20;
+	while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
+		& SDHCI_CLOCK_INT_STABLE)) {
+		if (timeout == 0) {
+			pr_err("%s: Internal clock never stabilised.\n",
+			       mmc_hostname(host->mmc));
+			return;
+		}
+		timeout--;
+		mdelay(1);
+	}
+
+	clk |= SDHCI_CLOCK_CARD_EN;
+	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+}
+
+static void sdhci_msm_set_clock(struct sdhci_host *host, unsigned int clock)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
+	u32 msm_clock = 0;
+	int rc = 0;
+
+	if (!clock)
+		goto out;
+
+	if (clock != msm_host->clk_rate) {
+		msm_clock = sdhci_msm_get_msm_clk_rate(host, clock);
+		rc = clk_set_rate(msm_host->clk, msm_clock);
+		if (rc) {
+			pr_err("%s: failed to set clock at rate %u, requested clock rate %u\n",
+				mmc_hostname(host->mmc), msm_clock, clock);
+			goto out;
+		}
+		msm_host->clk_rate = clock;
+		pr_debug("%s: setting clock at rate %lu\n",
+			mmc_hostname(host->mmc), clk_get_rate(msm_host->clk));
+	}
+out:
+	__sdhci_msm_set_clock(host, clock);
+}
+
 static const struct of_device_id sdhci_msm_dt_match[] = {
 	{ .compatible = "qcom,sdhci-msm-v4" },
 	{},
@@ -580,7 +681,7 @@ MODULE_DEVICE_TABLE(of, sdhci_msm_dt_match);
 static const struct sdhci_ops sdhci_msm_ops = {
 	.platform_execute_tuning = sdhci_msm_execute_tuning,
 	.reset = sdhci_reset,
-	.set_clock = sdhci_set_clock,
+	.set_clock = sdhci_msm_set_clock,
 	.get_min_clock = sdhci_msm_get_min_clock,
 	.get_max_clock = sdhci_msm_get_max_clock,
 	.set_bus_width = sdhci_set_bus_width,
-- 
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, 
a Linux Foundation Collaborative Project.

  parent reply	other threads:[~2016-08-16 11:41 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-08-16 11:41 [PATCH v2 0/8] Add clk-rates and DDR support to sdhci-msm Ritesh Harjani
2016-08-16 11:41 ` [PATCH v2 1/8] mmc: sdhci-msm: Update DLL reset sequence Ritesh Harjani
2016-08-16 18:31   ` Bjorn Andersson
2016-08-17  8:58     ` Ritesh Harjani
2016-08-16 11:41 ` [PATCH v2 2/8] mmc: sdhci-msm: add pltfm_data support to get clk-rates from DT Ritesh Harjani
2016-08-16 11:41 ` [PATCH v2 3/8] arm64: dts: qcom: msm8916: Add clk-rates to sdhc1 & sdhc2 Ritesh Harjani
2016-08-16 11:41 ` [PATCH v2 4/8] mmc: sdhci-msm: Add get_min_clock() and get_max_clock() callback Ritesh Harjani
2016-08-16 11:41 ` [PATCH v2 5/8] mmc: sdhci-msm: Enable few quirks Ritesh Harjani
2016-08-16 11:41 ` Ritesh Harjani [this message]
2016-08-16 11:41 ` [PATCH v2 7/8] mmc: sdhci-msm: Add clock changes for DDR mode Ritesh Harjani
2016-08-16 11:41 ` [PATCH v2 8/8] arm64: dts: qcom: msm8916: Add ddr support to sdhc1 Ritesh Harjani

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1471347668-22978-7-git-send-email-riteshh@codeaurora.org \
    --to=riteshh@codeaurora.org \
    --cc=Yuliy.Izrailov@sandisk.com \
    --cc=adrian.hunter@intel.com \
    --cc=alex.lemberg@sandisk.com \
    --cc=asutoshd@codeaurora.org \
    --cc=david.griego@linaro.org \
    --cc=georgi.djakov@linaro.org \
    --cc=jh80.chung@samsung.com \
    --cc=kdorfman@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=mateusz.nowak@intel.com \
    --cc=shawn.lin@rock-chips.com \
    --cc=stummala@codeaurora.org \
    --cc=ulf.hansson@linaro.org \
    --cc=venkatg@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).