From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: linux-mmc@vger.kernel.org,
Adrian Hunter <adrian.hunter@intel.com>,
Ulf Hansson <ulf.hansson@linaro.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Subject: [PATCH v1 1/1] mmc: sdhci-pci: Convert to use managed functions (part2)
Date: Thu, 18 Aug 2016 14:59:13 +0300 [thread overview]
Message-ID: <1471521553-125728-1-git-send-email-andriy.shevchenko@linux.intel.com> (raw)
The commit 52ac7acf412b ("mmc: sdhci-pci: Convert to use managed functions
pcim_* and devm_*") converted ->probe() / ->remove() functions to use device
managed resource API. Here is a follow up to cover sdhci_pci_probe_slot() and
sdhci_pci_remove_slot().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/mmc/host/sdhci-pci-core.c | 34 ++++++----------------------------
drivers/mmc/host/sdhci-pci.h | 1 -
2 files changed, 6 insertions(+), 29 deletions(-)
diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c
index 897cfd2..93bb0ff 100644
--- a/drivers/mmc/host/sdhci-pci-core.c
+++ b/drivers/mmc/host/sdhci-pci-core.c
@@ -156,7 +156,7 @@ static void sdhci_pci_add_own_cd(struct sdhci_pci_slot *slot)
if (!gpio_is_valid(gpio))
return;
- err = gpio_request(gpio, "sd_cd");
+ err = devm_gpio_request(&slot->chip->pdev->dev, gpio, "sd_cd");
if (err < 0)
goto out;
@@ -179,7 +179,7 @@ static void sdhci_pci_add_own_cd(struct sdhci_pci_slot *slot)
return;
out_free:
- gpio_free(gpio);
+ devm_gpio_free(&slot->chip->pdev->dev, gpio);
out:
dev_warn(&slot->chip->pdev->dev, "failed to setup card detect wake up\n");
}
@@ -188,8 +188,6 @@ static void sdhci_pci_remove_own_cd(struct sdhci_pci_slot *slot)
{
if (slot->cd_irq >= 0)
free_irq(slot->cd_irq, slot);
- if (gpio_is_valid(slot->cd_gpio))
- gpio_free(slot->cd_gpio);
}
#else
@@ -1615,7 +1613,6 @@ static struct sdhci_pci_slot *sdhci_pci_probe_slot(
slot->chip = chip;
slot->host = host;
- slot->pci_bar = bar;
slot->rst_n_gpio = -EINVAL;
slot->cd_gpio = -EINVAL;
slot->cd_idx = -1;
@@ -1643,27 +1640,22 @@ static struct sdhci_pci_slot *sdhci_pci_probe_slot(
host->irq = pdev->irq;
- ret = pci_request_region(pdev, bar, mmc_hostname(host->mmc));
+ ret = pcim_iomap_regions(pdev, BIT(bar), mmc_hostname(host->mmc));
if (ret) {
dev_err(&pdev->dev, "cannot request region\n");
goto cleanup;
}
- host->ioaddr = pci_ioremap_bar(pdev, bar);
- if (!host->ioaddr) {
- dev_err(&pdev->dev, "failed to remap registers\n");
- ret = -ENOMEM;
- goto release;
- }
+ host->ioaddr = pcim_iomap_table(pdev)[bar];
if (chip->fixes && chip->fixes->probe_slot) {
ret = chip->fixes->probe_slot(slot);
if (ret)
- goto unmap;
+ goto cleanup;
}
if (gpio_is_valid(slot->rst_n_gpio)) {
- if (!gpio_request(slot->rst_n_gpio, "eMMC_reset")) {
+ if (!devm_gpio_request(&pdev->dev, slot->rst_n_gpio, "eMMC_reset")) {
gpio_direction_output(slot->rst_n_gpio, 1);
slot->host->mmc->caps |= MMC_CAP_HW_RESET;
slot->hw_reset = sdhci_pci_gpio_hw_reset;
@@ -1702,18 +1694,9 @@ static struct sdhci_pci_slot *sdhci_pci_probe_slot(
return slot;
remove:
- if (gpio_is_valid(slot->rst_n_gpio))
- gpio_free(slot->rst_n_gpio);
-
if (chip->fixes && chip->fixes->remove_slot)
chip->fixes->remove_slot(slot, 0);
-unmap:
- iounmap(host->ioaddr);
-
-release:
- pci_release_region(pdev, bar);
-
cleanup:
if (slot->data && slot->data->cleanup)
slot->data->cleanup(slot->data);
@@ -1738,17 +1721,12 @@ static void sdhci_pci_remove_slot(struct sdhci_pci_slot *slot)
sdhci_remove_host(slot->host, dead);
- if (gpio_is_valid(slot->rst_n_gpio))
- gpio_free(slot->rst_n_gpio);
-
if (slot->chip->fixes && slot->chip->fixes->remove_slot)
slot->chip->fixes->remove_slot(slot, dead);
if (slot->data && slot->data->cleanup)
slot->data->cleanup(slot->data);
- pci_release_region(slot->chip->pdev, slot->pci_bar);
-
sdhci_free_host(slot->host);
}
diff --git a/drivers/mmc/host/sdhci-pci.h b/drivers/mmc/host/sdhci-pci.h
index 7e07887..9c7c08b 100644
--- a/drivers/mmc/host/sdhci-pci.h
+++ b/drivers/mmc/host/sdhci-pci.h
@@ -72,7 +72,6 @@ struct sdhci_pci_slot {
struct sdhci_host *host;
struct sdhci_pci_data *data;
- int pci_bar;
int rst_n_gpio;
int cd_gpio;
int cd_irq;
--
2.8.1
next reply other threads:[~2016-08-18 11:59 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-18 11:59 Andy Shevchenko [this message]
2016-08-29 12:48 ` [PATCH v1 1/1] mmc: sdhci-pci: Convert to use managed functions (part2) Adrian Hunter
2016-08-30 9:34 ` Ulf Hansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1471521553-125728-1-git-send-email-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=adrian.hunter@intel.com \
--cc=linux-mmc@vger.kernel.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).