From: Ritesh Raj Sarraf <rrs@researchut.com>
To: Alan Stern <stern@rowland.harvard.edu>
Cc: Ulf Hansson <ulf.hansson@linaro.org>,
Alex Dubov <oakad@yahoo.com>,
USB list <linux-usb@vger.kernel.org>,
linux-mmc <linux-mmc@vger.kernel.org>
Subject: Re: xHCI problem? [was Re: Erratic USB device behavior and device loss]
Date: Tue, 20 Sep 2016 21:21:27 +0530 [thread overview]
Message-ID: <1474386687.21100.10.camel@researchut.com> (raw)
In-Reply-To: <Pine.LNX.4.44L0.1609201141591.1379-100000@iolanthe.rowland.org>
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
On Tue, 2016-09-20 at 11:43 -0400, Alan Stern wrote:
> > Yes. But that'd also mean to write that value upon every suspend/resume
> cycle
> > because the rtsx usb driver still declares support for autosuspend.
> > Should that be dropped ?
>
> No, the value doesn't change across a suspend/resume cycle.
>
I just verified, and yes, you are right. The value doesn't change.
> > > I'm afraid that this won't prevent the device from disconnecting
> > > itself, though. This appears to be some sort of hardware bug that
> > > can't be fixed in software.
> >
> > And that'd mean that upon every reset, the driver will again enable
> autosuspend
> > for that driver.
>
> Yes, that's true. I'm curious to see if preventing autosuspends will
> get rid of the resets. My guess is that it won't.
No. We tried it in the beginning. And the resets were still seen.
Thanks.
- --
Ritesh Raj Sarraf
RESEARCHUT - http://www.researchut.com
"Necessity is the mother of invention."
-----BEGIN PGP SIGNATURE-----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=bGWs
-----END PGP SIGNATURE-----
next prev parent reply other threads:[~2016-09-20 15:51 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1472132041.13456.11.camel@researchut.com>
2016-08-25 17:17 ` xHCI problem? [was Re: Erratic USB device behavior and device loss] Alan Stern
[not found] ` <Pine.LNX.4.44L0.1608251254220.1395-100000-IYeN2dnnYyZXsRXLowluHWD2FQJk+8+b@public.gmane.org>
2016-08-30 8:14 ` Ulf Hansson
[not found] ` <CAPDyKFq2SYtwWCNhSzQcxj8XdYmAhTqn6mxRKMJ7eKZAk=itWg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-09-04 11:32 ` Ritesh Raj Sarraf
2016-09-04 18:01 ` Ritesh Raj Sarraf
[not found] ` <1473012074.5339.6.camel-7WuBAv+fczCJ8c2fQYRYNw@public.gmane.org>
2016-09-04 19:46 ` Alan Stern
2016-09-05 12:59 ` Ritesh Raj Sarraf
[not found] ` <1473080344.10346.4.camel-7WuBAv+fczCJ8c2fQYRYNw@public.gmane.org>
2016-09-05 15:58 ` Alan Stern
[not found] ` <Pine.LNX.4.44L0.1609051157310.25234-100000-pYrvlCTfrz9XsRXLowluHWD2FQJk+8+b@public.gmane.org>
2016-09-06 9:42 ` Ulf Hansson
2016-09-06 17:08 ` Ritesh Raj Sarraf
[not found] ` <CAPDyKFpnCXhdoKgoG576teC=y38vbC1x=-ehC_9EWEeKr_K6BQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-09-07 20:48 ` Alan Stern
[not found] ` <Pine.LNX.4.44L0.1609071630350.2115-100000-IYeN2dnnYyZXsRXLowluHWD2FQJk+8+b@public.gmane.org>
2016-09-09 10:54 ` Ulf Hansson
[not found] ` <CAPDyKFr0vEaEbsoPm6YwJD1JOQc=YR=zwi4T6Rr3gCQ4StNuvg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-09-09 13:14 ` Ritesh Raj Sarraf
[not found] ` <1473426861.9415.2.camel-7WuBAv+fczCJ8c2fQYRYNw@public.gmane.org>
2016-09-09 14:04 ` Ritesh Raj Sarraf
[not found] ` <1473429884.9415.8.camel-7WuBAv+fczCJ8c2fQYRYNw@public.gmane.org>
2016-09-09 16:15 ` Alan Stern
2016-09-14 14:50 ` Ritesh Raj Sarraf
[not found] ` <1473864634.9913.12.camel-7WuBAv+fczCJ8c2fQYRYNw@public.gmane.org>
2016-09-14 15:19 ` Alan Stern
2016-09-15 13:59 ` Ulf Hansson
2016-09-15 14:16 ` Alan Stern
2016-09-16 15:42 ` Ritesh Raj Sarraf
2016-09-16 21:40 ` Alan Stern
[not found] ` <Pine.LNX.4.44L0.1609161729340.1657-100000-IYeN2dnnYyZXsRXLowluHWD2FQJk+8+b@public.gmane.org>
2016-09-17 11:42 ` Ritesh Raj Sarraf
2016-09-18 1:42 ` Alan Stern
[not found] ` <Pine.LNX.4.44L0.1609172131120.698-100000-pYrvlCTfrz9XsRXLowluHWD2FQJk+8+b@public.gmane.org>
2016-09-19 10:10 ` Ulf Hansson
2016-09-19 17:48 ` Alan Stern
[not found] ` <Pine.LNX.4.44L0.1609191340320.1458-100000-IYeN2dnnYyZXsRXLowluHWD2FQJk+8+b@public.gmane.org>
2016-09-20 12:36 ` Ritesh Raj Sarraf
2016-09-20 14:16 ` Alan Stern
[not found] ` <Pine.LNX.4.44L0.1609201012290.1459-100000-IYeN2dnnYyZXsRXLowluHWD2FQJk+8+b@public.gmane.org>
2016-09-20 15:17 ` Ritesh Raj Sarraf
[not found] ` <1474384626.21100.6.camel-7WuBAv+fczCJ8c2fQYRYNw@public.gmane.org>
2016-09-20 15:43 ` Alan Stern
2016-09-20 15:51 ` Ritesh Raj Sarraf [this message]
2016-09-21 11:10 ` Ritesh Raj Sarraf
[not found] ` <1474456212.8192.2.camel-7WuBAv+fczCJ8c2fQYRYNw@public.gmane.org>
2016-09-21 11:17 ` Ulf Hansson
[not found] ` <CAPDyKFrWHaPhubTsPjd7GpZcoQnGM9u1YEiy=iGpb1Qa2rJqPA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-09-21 11:42 ` Ritesh Raj Sarraf
2016-09-21 14:37 ` Alan Stern
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1474386687.21100.10.camel@researchut.com \
--to=rrs@researchut.com \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=oakad@yahoo.com \
--cc=stern@rowland.harvard.edu \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox