From mboxrd@z Thu Jan 1 00:00:00 1970 From: Zach Brown Subject: [PATCH 2/2] mmc: sdhci-pci: Use ACPI to get max frequency for Intel byt sdio controller sub-vended by NI Date: Mon, 21 Nov 2016 17:04:06 -0600 Message-ID: <1479769446-8490-3-git-send-email-zach.brown@ni.com> References: <1479769446-8490-1-git-send-email-zach.brown@ni.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <1479769446-8490-1-git-send-email-zach.brown@ni.com> Sender: linux-kernel-owner@vger.kernel.org To: ulf.hansson@linaro.org Cc: adrian.hunter@intel.com, linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org, zach.brown@ni.com List-Id: linux-mmc@vger.kernel.org On NI 9037 boards the max SDIO frequency is limited by trace lengths and other layout choices. The max SDIO frequency is stored in an ACPI table. The driver reads the ACPI entry MXFQ during sdio_probe_slot and sets the f_max field of the host. Signed-off-by: Nathan Sullivan Reviewed-by: Jaeden Amero Reviewed-by: Josh Cartwright Signed-off-by: Zach Brown --- drivers/mmc/host/sdhci-pci-core.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c index 9741505..a855c97 100644 --- a/drivers/mmc/host/sdhci-pci-core.c +++ b/drivers/mmc/host/sdhci-pci-core.c @@ -27,6 +27,7 @@ #include #include #include +#include #include "sdhci.h" #include "sdhci-pci.h" @@ -377,6 +378,20 @@ static int byt_emmc_probe_slot(struct sdhci_pci_slot *slot) static int ni_byt_sdio_probe_slot(struct sdhci_pci_slot *slot) { +#ifdef CONFIG_ACPI + acpi_status status; + unsigned long long max_freq; + + status = acpi_evaluate_integer(ACPI_HANDLE(&slot->chip->pdev->dev), + "MXFQ", NULL, &max_freq); + if (ACPI_FAILURE(status)) { + dev_info(&slot->chip->pdev->dev, + "MXFQ not found in acpi table\n"); + return -EINVAL; + } + + slot->host->mmc->f_max = max_freq * 1000000; +#endif slot->host->mmc->caps |= MMC_CAP_POWER_OFF_CARD | MMC_CAP_NONREMOVABLE | MMC_CAP_WAIT_WHILE_BUSY; return 0; -- 2.7.4