[PATCH V8 00/20] mmc: mmc: Add Software Command Queuing

[PATCH V8 00/20] mmc: mmc: Add Software Command Queuing

[Adrian Hunter]

Hi

Here is an updated version of the Software Command Queuing patches,
re-based on next, with some changes - refer changes in V8 below.
It would be good to move at least a few of these patches: for example,
patches 2-7 could be considered to be tidy-ups.  Patch 1 could be
rolled into the Packed Commands removal patch.

Performance results (not updated since V5):

Results can vary from run to run, but here are some results showing 1, 2 or 4
processes with 4k and 32k record sizes.  They show up to 40% improvement in
read performance when there are multiple processes.

iozone -s 8192k -r 4k -i 0 -i 1 -i 2 -i 8 -I -t 1 -F /mnt/mmc/iozone1.tmp

	Children see throughput for  1 initial writers 	=     27909.87 kB/sec     24204.14 kB/sec      -13.28 %
	Children see throughput for  1 rewriters 	=     28839.28 kB/sec     25531.92 kB/sec      -11.47 %
	Children see throughput for  1 readers 		=     25889.65 kB/sec     24883.23 kB/sec       -3.89 %
	Children see throughput for 1 re-readers 	=     25558.23 kB/sec     24679.89 kB/sec       -3.44 %
	Children see throughput for 1 random readers 	=     25571.48 kB/sec     24689.52 kB/sec       -3.45 %
	Children see throughput for 1 mixed workload 	=     25758.59 kB/sec     24487.52 kB/sec       -4.93 %
	Children see throughput for 1 random writers 	=     24787.51 kB/sec     19368.99 kB/sec      -21.86 %

iozone -s 8192k -r 32k -i 0 -i 1 -i 2 -i 8 -I -t 1 -F /mnt/mmc/iozone1.tmp

	Children see throughput for  1 initial writers 	=     91344.61 kB/sec    102008.56 kB/sec       11.67 %
	Children see throughput for  1 rewriters 	=     87932.36 kB/sec     96630.44 kB/sec        9.89 %
	Children see throughput for  1 readers 		=    134879.82 kB/sec    110292.79 kB/sec      -18.23 %
	Children see throughput for 1 re-readers 	=    147632.13 kB/sec    109053.33 kB/sec      -26.13 %
	Children see throughput for 1 random readers 	=     93547.37 kB/sec    112225.50 kB/sec       19.97 %
	Children see throughput for 1 mixed workload 	=     93560.04 kB/sec    110515.21 kB/sec       18.12 %
	Children see throughput for 1 random writers 	=     92841.84 kB/sec     81153.81 kB/sec      -12.59 %

iozone -s 8192k -r 4k -i 0 -i 1 -i 2 -i 8 -I -t 2 -F /mnt/mmc/iozone1.tmp /mnt/mmc/iozone2.tmp

	Children see throughput for  2 initial writers 	=     31145.43 kB/sec     33771.25 kB/sec        8.43 %
	Children see throughput for  2 rewriters 	=     30592.57 kB/sec     35916.46 kB/sec       17.40 %
	Children see throughput for  2 readers 		=     31669.83 kB/sec     37460.13 kB/sec       18.28 %
	Children see throughput for 2 re-readers 	=     32079.94 kB/sec     37373.33 kB/sec       16.50 %
	Children see throughput for 2 random readers 	=     27731.19 kB/sec     37601.65 kB/sec       35.59 %
	Children see throughput for 2 mixed workload 	=     13927.50 kB/sec     14617.06 kB/sec        4.95 %
	Children see throughput for 2 random writers 	=     31250.00 kB/sec     33106.72 kB/sec        5.94 %

iozone -s 8192k -r 32k -i 0 -i 1 -i 2 -i 8 -I -t 2 -F /mnt/mmc/iozone1.tmp /mnt/mmc/iozone2.tmp

	Children see throughput for  2 initial writers 	=    123255.84 kB/sec    131252.22 kB/sec        6.49 %
	Children see throughput for  2 rewriters 	=    115234.91 kB/sec    107225.74 kB/sec       -6.95 %
	Children see throughput for  2 readers 		=    128921.86 kB/sec    148562.71 kB/sec       15.23 %
	Children see throughput for 2 re-readers 	=    127815.24 kB/sec    149304.32 kB/sec       16.81 %
	Children see throughput for 2 random readers 	=    125600.46 kB/sec    148406.56 kB/sec       18.16 %
	Children see throughput for 2 mixed workload 	=     44006.94 kB/sec     50937.36 kB/sec       15.75 %
	Children see throughput for 2 random writers 	=    120623.95 kB/sec    103969.05 kB/sec      -13.81 %

iozone -s 8192k -r 4k -i 0 -i 1 -i 2 -i 8 -I -t 4 -F /mnt/mmc/iozone1.tmp /mnt/mmc/iozone2.tmp /mnt/mmc/iozone3.tmp /mnt/mmc/iozone4.tmp

	Children see throughput for  4 initial writers 	=     24100.96 kB/sec     33336.58 kB/sec       38.32 %
	Children see throughput for  4 rewriters 	=     31650.20 kB/sec     33091.53 kB/sec        4.55 %
	Children see throughput for  4 readers 		=     33276.92 kB/sec     41799.89 kB/sec       25.61 %
	Children see throughput for 4 re-readers 	=     31786.96 kB/sec     41501.74 kB/sec       30.56 %
	Children see throughput for 4 random readers 	=     31991.65 kB/sec     40973.93 kB/sec       28.08 %
	Children see throughput for 4 mixed workload 	=     15804.80 kB/sec     13581.32 kB/sec      -14.07 %
	Children see throughput for 4 random writers 	=     31231.42 kB/sec     34537.03 kB/sec       10.58 %

iozone -s 8192k -r 32k -i 0 -i 1 -i 2 -i 8 -I -t 4 -F /mnt/mmc/iozone1.tmp /mnt/mmc/iozone2.tmp /mnt/mmc/iozone3.tmp /mnt/mmc/iozone4.tmp

	Children see throughput for  4 initial writers 	=    116567.42 kB/sec    119280.35 kB/sec        2.33 %
	Children see throughput for  4 rewriters 	=    115010.96 kB/sec    120864.34 kB/sec        5.09 %
	Children see throughput for  4 readers 		=    130700.29 kB/sec    177834.21 kB/sec       36.06 %
	Children see throughput for 4 re-readers 	=    125392.58 kB/sec    175975.28 kB/sec       40.34 %
	Children see throughput for 4 random readers 	=    132194.57 kB/sec    176630.46 kB/sec       33.61 %
	Children see throughput for 4 mixed workload 	=     56464.98 kB/sec     54140.61 kB/sec       -4.12 %
	Children see throughput for 4 random writers 	=    109128.36 kB/sec     85359.80 kB/sec      -21.78 %


The current block driver supports 2 requests on the go at a time. Patches
3 - 8 make preparations for an arbitrary sized queue. Patches 9 - 12
introduce Command Queue definitions and helpers.  Patches 13 - 16
complete the job of making the block driver use a queue.  Patches 17 - 20
finally add Software Command Queuing.  Most of the Software Command Queuing
functionality is added in patch 19.

As noted below, the patches can also be found here:

	http://git.infradead.org/users/ahunter/linux-sdhci.git/shortlog/refs/heads/swcmdq
	
	which also includes a debug-only patch to help debug stuck queues:
	    mmc: block: Add debugfs state file for debugging stuck queues

Changes in V8:

  Re-based on next, dropping references to Packed Commands.

  mmc: block: Restore line inadvertently removed with packed commands
    New patch

  mmc: block: Fix 4K native sector check
    Moved to be the 2nd patch
    Added Reviewed-by: Linus Walleij

  mmc: queue: Fix queue thread wake-up
    Added Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
    Added Reviewed-by: Harjani Ritesh <riteshh@codeaurora.org>

  mmc: queue: Factor out mmc_queue_alloc_bounce_bufs()
    Added Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
    Added Reviewed-by: Harjani Ritesh <riteshh@codeaurora.org>

  mmc: queue: Factor out mmc_queue_alloc_bounce_sgs()
    Added Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
    Added Reviewed-by: Harjani Ritesh <riteshh@codeaurora.org>

  mmc: queue: Factor out mmc_queue_alloc_sgs()
    Added Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
    Added Reviewed-by: Harjani Ritesh <riteshh@codeaurora.org>

  mmc: queue: Factor out mmc_queue_reqs_free_bufs()
    Added Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
    Added Reviewed-by: Harjani Ritesh <riteshh@codeaurora.org>

  mmc: queue: Introduce queue depth
    Drop chunk referring to mmc_packed_init().
    Combined into new patch "mmc: queue: Introduce queue depth and use it to allocate and free"

  mmc: queue: Use queue depth to allocate and free
    Combined into new patch "mmc: queue: Introduce queue depth and use it to allocate and free"

  mmc: queue: Allocate queue of size qdepth
    Combined into new patch "mmc: queue: Introduce queue depth and use it to allocate and free"

  mmc: queue: Introduce queue depth and use it to allocate and free
    New patch from combining 3 patches above.

  mmc: mmc: Add Command Queue definitions
    Add comment about excluding qdepths of 1 or 2.

  mmc: mmc: Add functions to enable / disable the Command Queue
    Change mmc_cmdq_switch() 'enable' parameter from 'int' to 'bool'.

  mmc: mmc_test: Disable Command Queue while mmc_test is used
    Added Reviewed-by: Harjani Ritesh <riteshh@codeaurora.org>

  mmc: block: Disable Command Queue while RPMB is used
    As per Ritesh, assign 'ret' to 0 and return 'ret'.
    Added Reviewed-by: Harjani Ritesh <riteshh@codeaurora.org>

  mmc: core: Do not prepare a new request twice
    Added Reviewed-by: Harjani Ritesh <riteshh@codeaurora.org>

  mmc: core: Export mmc_retune_hold() and mmc_retune_release()
    Added Reviewed-by: Harjani Ritesh <riteshh@codeaurora.org>

  mmc: block: Factor out mmc_blk_requeue()
    Dropped because it only affected "packed commands" code.

  mmc: block: Use local var for mqrq_cur
    Dropped chucks referring to Packed Commands.
    Added Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

  mmc: block: Pass mqrq to mmc_blk_prep_packed_list()
    Dropped because it only affected "packed commands" code.

  mmc: block: Introduce queue semantics
    Add mmc_blk_requeue() lost from dropped patches.

  mmc: queue: Share mmc request array between partitions
    Dropped chucks referring to Packed Commands.
    Change mqrq_ref_cnt from 'int' to 'unsigned int'
    Add a comment about synchronisation of mqrq_ref_cnt.

  mmc: mmc: Enable Software Command Queuing
    Get rid of MMC_CAP_SWCMDQ and use MMC_CAP_CMD_DURING_TFR instead

  mmc: sdhci-pci: Enable Software Command Queuing for some Intel controllers
    Dropped because MMC_CAP_SWCMDQ removed.

  mmc: sdhci-acpi: Enable Software Command Queuing for some Intel controllers
    Dropped because MMC_CAP_SWCMDQ removed.

Changes in V7:

  Re-based on next.

  mmc: mmc: Add Command Queue definitions
    Remove cmdq_en flag and add Linus Walleij's Reviewed-by.

  mmc: mmc: Add functions to enable / disable the Command
    Add cmdq_en flag.

Changes in V6:

  mmc: core: Do not prepare a new request twice
    Ensure struct mmc_async_req is always initialized to zero

Changes in V5:

  Patches 1-5 dropped because they have been applied.
 
  Re-based on next.
 
  Fixed use of blk_end_request_cur() when it should have been
  blk_end_request_all() to error out requests during error recovery.

  Fixed unpaired retune_hold / retune_release in the error recovery path.

Changes in V4:

  Re-based on next + v4.8-rc2 + "block: Fix secure erase" patch

Changes in V3:

  Patches 1-25 dropped because they have been applied.

  Re-based on next.

  mmc: queue: Allocate queue of size qdepth
    Free queue during cleanup

  mmc: mmc: Add Command Queue definitions
    Add cmdq_en to mmc-dev-attrs.txt documentation

  mmc: queue: Share mmc request array between partitions
    New patch

Changes in V2:

  Added 5 patches already sent here:

    http://marc.info/?l=linux-mmc&m=146712062816835

  Added 3 more new patches:

    mmc: sdhci-pci: Do not runtime suspend at the end of sdhci_pci_probe()
    mmc: sdhci: Avoid STOP cmd triggering warning in sdhci_send_command()
    mmc: sdhci: sdhci_execute_tuning() must delete timer

  Carried forward the V2 fix to:

    mmc: mmc_test: Disable Command Queue while mmc_test is used

  Also reset the cmd circuit for data timeout if it is processing the data
  cmd, in patch:

    mmc: sdhci: Do not reset cmd or data circuits that are in use

There wasn't much comment on the RFC so there have been few changes.
Venu Byravarasu commented that it may be more efficient to use Software
Command Queuing only when there is more than 1 request queued - it isn't
obvious how well that would work in practice, but it could be added later
if it could be shown to be beneficial.

Original Cover Letter:

Chuanxiao Dong sent some patches last year relating to eMMC 5.1 Software
Command Queuing.  He did not follow-up but I have contacted him and he says
it is OK if I take over upstreaming the patches.

eMMC Command Queuing is a feature added in version 5.1.  The card maintains
a queue of up to 32 data transfers.  Commands CMD45/CMD45 are sent to queue
up transfers in advance, and then one of the transfers is selected to
"execute" by CMD46/CMD47 at which point data transfer actually begins.

The advantage of command queuing is that the card can prepare for transfers
in advance.  That makes a big difference in the case of random reads because
the card can start reading into its cache in advance.

A v5.1 host controller can manage the command queue itself, but it is also
possible for software to manage the queue using an non-v5.1 host controller
- that is what Software Command Queuing is.

Refer to the JEDEC (http://www.jedec.org/) eMMC v5.1 Specification for more
information about Command Queuing.

While these patches are heavily based on Dong's patches, there are some
changes:

SDHCI has been amended to support commands during transfer. That is a
generic change added in patches 1 - 5. [Those patches have now been applied]
In principle, that would also support SDIO's CMD52 during data transfer.

The original approach added multiple commands into the same request for
sending CMD44, CMD45 and CMD13. That is not strictly necessary and has
been omitted for now.

The original approach also called blk_end_request() from the mrq->done()
function, which means the upper layers learnt of completed requests
slightly earlier. That is not strictly related to Software Command Queuing
and is something that could potentially be done for all data requests.
That has been omitted for now.

The current block driver supports 2 requests on the go at a time. Patches
1 - 8 make preparations for an arbitrary sized queue. Patches 9 - 12
introduce Command Queue definitions and helpers.  Patches 13 - 19
complete the job of making the block driver use a queue.  Patches 20 - 23
finally add Software Command Queuing, and 24 - 25 enable it for Intel eMMC
controllers. Most of the Software Command Queuing functionality is added
in patch 22.

The patches can also be found here:

	http://git.infradead.org/users/ahunter/linux-sdhci.git/shortlog/refs/heads/swcmdq

The patches have only had basic testing so far. Ad-hoc testing shows a
degradation in sequential read performance of about 10% but an increase in
throughput for mixed workload of multiple processes of about 90%. The
reduction in sequential performance is due to the need to read the Queue
Status register between each transfer.

These patches should not conflict with Hardware Command Queuing which
handles the queue in a completely different way and thus does not need
to share code with Software Command Queuing. The exceptions being the
Command Queue definitions and queue allocation which should be able to be
used.


Adrian Hunter (20):
      mmc: block: Restore line inadvertently removed with packed commands
      mmc: block: Fix 4K native sector check
      mmc: queue: Fix queue thread wake-up
      mmc: queue: Factor out mmc_queue_alloc_bounce_bufs()
      mmc: queue: Factor out mmc_queue_alloc_bounce_sgs()
      mmc: queue: Factor out mmc_queue_alloc_sgs()
      mmc: queue: Factor out mmc_queue_reqs_free_bufs()
      mmc: queue: Introduce queue depth and use it to allocate and free
      mmc: mmc: Add Command Queue definitions
      mmc: mmc: Add functions to enable / disable the Command Queue
      mmc: mmc_test: Disable Command Queue while mmc_test is used
      mmc: block: Disable Command Queue while RPMB is used
      mmc: core: Do not prepare a new request twice
      mmc: core: Export mmc_retune_hold() and mmc_retune_release()
      mmc: block: Use local var for mqrq_cur
      mmc: block: Introduce queue semantics
      mmc: queue: Share mmc request array between partitions
      mmc: queue: Add a function to control wake-up on new requests
      mmc: block: Add Software Command Queuing
      mmc: mmc: Enable Software Command Queuing

 Documentation/mmc/mmc-dev-attrs.txt |   1 +
 drivers/mmc/card/block.c            | 712 +++++++++++++++++++++++++++++++++---
 drivers/mmc/card/mmc_test.c         |  21 +-
 drivers/mmc/card/queue.c            | 328 +++++++++++------
 drivers/mmc/card/queue.h            |  27 +-
 drivers/mmc/core/core.c             |  18 +-
 drivers/mmc/core/host.c             |   2 +
 drivers/mmc/core/host.h             |   2 -
 drivers/mmc/core/mmc.c              |  44 ++-
 drivers/mmc/core/mmc_ops.c          |  28 ++
 include/linux/mmc/card.h            |   8 +
 include/linux/mmc/core.h            |   6 +
 include/linux/mmc/host.h            |   3 +-
 include/linux/mmc/mmc.h             |  17 +
 14 files changed, 1035 insertions(+), 182 deletions(-)


Regards
Adrian

[PATCH V8 01/20] mmc: block: Restore line inadvertently removed with packed commands

[Adrian Hunter]

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
---
 drivers/mmc/card/block.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 86ff28f84698..19597e3cefcb 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -1587,6 +1587,8 @@ static int mmc_blk_cmd_err(struct mmc_blk_data *md, struct mmc_card *card,
 		if (blocks != (u32)-1) {
 			ret = blk_end_request(req, 0, blocks << 9);
 		}
+	} else {
+		ret = blk_end_request(req, 0, brq->data.bytes_xfered);
 	}
 	return ret;
 }
-- 
1.9.1

[PATCH V8 02/20] mmc: block: Fix 4K native sector check

[Adrian Hunter]

The 4K native sector check does not allow for the 'do' loop nor the
variables used after the 'cmd_abort' label.

'brq' and 'req' get reassigned in the 'do' loop, so the check must not
assume what their values are. After the 'cmd_abort' label, 'mq_rq' and
'req' are used, but 'rqc' must be NULL otherwise it can be started again.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
---
 drivers/mmc/card/block.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 19597e3cefcb..3e73be0e7281 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -1597,11 +1597,11 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc)
 {
 	struct mmc_blk_data *md = mq->blkdata;
 	struct mmc_card *card = md->queue.card;
-	struct mmc_blk_request *brq = &mq->mqrq_cur->brq;
+	struct mmc_blk_request *brq;
 	int ret = 1, disable_multi = 0, retry = 0, type, retune_retry_done = 0;
 	enum mmc_blk_status status;
 	struct mmc_queue_req *mq_rq;
-	struct request *req = rqc;
+	struct request *req;
 	struct mmc_async_req *areq;
 
 	if (!rqc && !mq->mqrq_prev->req)
@@ -1616,8 +1616,10 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc)
 			if (mmc_large_sector(card) &&
 				!IS_ALIGNED(blk_rq_sectors(rqc), 8)) {
 				pr_err("%s: Transfer size is not 4KB sector size aligned\n",
-					req->rq_disk->disk_name);
+					rqc->rq_disk->disk_name);
 				mq_rq = mq->mqrq_cur;
+				req = rqc;
+				rqc = NULL;
 				goto cmd_abort;
 			}
 
-- 
1.9.1

[PATCH V8 03/20] mmc: queue: Fix queue thread wake-up

[Adrian Hunter]

The only time the driver sleeps expecting to be woken upon the arrival of
a new request, is when the dispatch queue is empty. The only time that it
is known whether the dispatch queue is empty is after NULL is returned
from blk_fetch_request() while under the queue lock.

Recognizing those facts, simplify the synchronization between the queue
thread and the request function. A couple of flags tell the request
function what to do, and the queue lock and barriers associated with
wake-ups ensure synchronization.

The result is simpler and allows the removal of the context_info lock.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Harjani Ritesh <riteshh@codeaurora.org>
---
 drivers/mmc/card/block.c |  7 -------
 drivers/mmc/card/queue.c | 35 +++++++++++++++++++++--------------
 drivers/mmc/card/queue.h |  1 +
 drivers/mmc/core/core.c  |  6 ------
 include/linux/mmc/host.h |  2 --
 5 files changed, 22 insertions(+), 29 deletions(-)

diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 3e73be0e7281..646d1a1fa6ca 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -1758,8 +1758,6 @@ int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 	int ret;
 	struct mmc_blk_data *md = mq->blkdata;
 	struct mmc_card *card = md->queue.card;
-	struct mmc_host *host = card->host;
-	unsigned long flags;
 	bool req_is_special = mmc_req_is_special(req);
 
 	if (req && !mq->mqrq_prev->req)
@@ -1792,11 +1790,6 @@ int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 			mmc_blk_issue_rw_rq(mq, NULL);
 		ret = mmc_blk_issue_flush(mq, req);
 	} else {
-		if (!req && host->areq) {
-			spin_lock_irqsave(&host->context_info.lock, flags);
-			host->context_info.is_waiting_last_req = true;
-			spin_unlock_irqrestore(&host->context_info.lock, flags);
-		}
 		ret = mmc_blk_issue_rw_rq(mq, req);
 	}
 
diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c
index 7dacf2744fbd..010888d8d97c 100644
--- a/drivers/mmc/card/queue.c
+++ b/drivers/mmc/card/queue.c
@@ -53,6 +53,7 @@ static int mmc_queue_thread(void *d)
 {
 	struct mmc_queue *mq = d;
 	struct request_queue *q = mq->queue;
+	struct mmc_context_info *cntx = &mq->card->host->context_info;
 
 	current->flags |= PF_MEMALLOC;
 
@@ -63,6 +64,19 @@ static int mmc_queue_thread(void *d)
 		spin_lock_irq(q->queue_lock);
 		set_current_state(TASK_INTERRUPTIBLE);
 		req = blk_fetch_request(q);
+		mq->asleep = false;
+		cntx->is_waiting_last_req = false;
+		cntx->is_new_req = false;
+		if (!req) {
+			/*
+			 * Dispatch queue is empty so set flags for
+			 * mmc_request_fn() to wake us up.
+			 */
+			if (mq->mqrq_prev->req)
+				cntx->is_waiting_last_req = true;
+			else
+				mq->asleep = true;
+		}
 		mq->mqrq_cur->req = req;
 		spin_unlock_irq(q->queue_lock);
 
@@ -115,7 +129,6 @@ static void mmc_request_fn(struct request_queue *q)
 {
 	struct mmc_queue *mq = q->queuedata;
 	struct request *req;
-	unsigned long flags;
 	struct mmc_context_info *cntx;
 
 	if (!mq) {
@@ -127,19 +140,13 @@ static void mmc_request_fn(struct request_queue *q)
 	}
 
 	cntx = &mq->card->host->context_info;
-	if (!mq->mqrq_cur->req && mq->mqrq_prev->req) {
-		/*
-		 * New MMC request arrived when MMC thread may be
-		 * blocked on the previous request to be complete
-		 * with no current request fetched
-		 */
-		spin_lock_irqsave(&cntx->lock, flags);
-		if (cntx->is_waiting_last_req) {
-			cntx->is_new_req = true;
-			wake_up_interruptible(&cntx->wait);
-		}
-		spin_unlock_irqrestore(&cntx->lock, flags);
-	} else if (!mq->mqrq_cur->req && !mq->mqrq_prev->req)
+
+	if (cntx->is_waiting_last_req) {
+		cntx->is_new_req = true;
+		wake_up_interruptible(&cntx->wait);
+	}
+
+	if (mq->asleep)
 		wake_up_process(mq->thread);
 }
 
diff --git a/drivers/mmc/card/queue.h b/drivers/mmc/card/queue.h
index 47f5532b5776..d09fce655800 100644
--- a/drivers/mmc/card/queue.h
+++ b/drivers/mmc/card/queue.h
@@ -39,6 +39,7 @@ struct mmc_queue {
 	unsigned int		flags;
 #define MMC_QUEUE_SUSPENDED	(1 << 0)
 #define MMC_QUEUE_NEW_REQUEST	(1 << 1)
+	bool			asleep;
 	struct mmc_blk_data	*blkdata;
 	struct request_queue	*queue;
 	struct mmc_queue_req	mqrq[2];
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index f39397f7c8dc..dc1f27ee50b8 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -504,18 +504,14 @@ static enum mmc_blk_status mmc_wait_for_data_req_done(struct mmc_host *host,
 	struct mmc_command *cmd;
 	struct mmc_context_info *context_info = &host->context_info;
 	enum mmc_blk_status status;
-	unsigned long flags;
 
 	while (1) {
 		wait_event_interruptible(context_info->wait,
 				(context_info->is_done_rcv ||
 				 context_info->is_new_req));
-		spin_lock_irqsave(&context_info->lock, flags);
 		context_info->is_waiting_last_req = false;
-		spin_unlock_irqrestore(&context_info->lock, flags);
 		if (context_info->is_done_rcv) {
 			context_info->is_done_rcv = false;
-			context_info->is_new_req = false;
 			cmd = mrq->cmd;
 
 			if (!cmd->error || !cmd->retries ||
@@ -534,7 +530,6 @@ static enum mmc_blk_status mmc_wait_for_data_req_done(struct mmc_host *host,
 				continue; /* wait for done/new event again */
 			}
 		} else if (context_info->is_new_req) {
-			context_info->is_new_req = false;
 			if (!next_req)
 				return MMC_BLK_NEW_REQUEST;
 		}
@@ -3016,7 +3011,6 @@ void mmc_unregister_pm_notifier(struct mmc_host *host)
  */
 void mmc_init_context_info(struct mmc_host *host)
 {
-	spin_lock_init(&host->context_info.lock);
 	host->context_info.is_new_req = false;
 	host->context_info.is_done_rcv = false;
 	host->context_info.is_waiting_last_req = false;
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 2ce32fefb41c..8bc884121465 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -197,14 +197,12 @@ struct mmc_slot {
  * @is_new_req		wake up reason was new request
  * @is_waiting_last_req	mmc context waiting for single running request
  * @wait		wait queue
- * @lock		lock to protect data fields
  */
 struct mmc_context_info {
 	bool			is_done_rcv;
 	bool			is_new_req;
 	bool			is_waiting_last_req;
 	wait_queue_head_t	wait;
-	spinlock_t		lock;
 };
 
 struct regulator;
-- 
1.9.1

[PATCH V8 04/20] mmc: queue: Factor out mmc_queue_alloc_bounce_bufs()

[Adrian Hunter]

In preparation for supporting a queue of requests, factor out
mmc_queue_alloc_bounce_bufs().

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Harjani Ritesh <riteshh@codeaurora.org>
---
 drivers/mmc/card/queue.c | 45 +++++++++++++++++++++++++++------------------
 1 file changed, 27 insertions(+), 18 deletions(-)

diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c
index 010888d8d97c..4497a218c245 100644
--- a/drivers/mmc/card/queue.c
+++ b/drivers/mmc/card/queue.c
@@ -186,6 +186,31 @@ static void mmc_queue_setup_discard(struct request_queue *q,
 		queue_flag_set_unlocked(QUEUE_FLAG_SECERASE, q);
 }
 
+static bool mmc_queue_alloc_bounce_bufs(struct mmc_queue *mq,
+					unsigned int bouncesz)
+{
+	struct mmc_queue_req *mqrq_cur = mq->mqrq_cur;
+	struct mmc_queue_req *mqrq_prev = mq->mqrq_prev;
+
+	mqrq_cur->bounce_buf = kmalloc(bouncesz, GFP_KERNEL);
+	if (!mqrq_cur->bounce_buf) {
+		pr_warn("%s: unable to allocate bounce cur buffer\n",
+			mmc_card_name(mq->card));
+		return false;
+	}
+
+	mqrq_prev->bounce_buf = kmalloc(bouncesz, GFP_KERNEL);
+	if (!mqrq_prev->bounce_buf) {
+		pr_warn("%s: unable to allocate bounce prev buffer\n",
+			mmc_card_name(mq->card));
+		kfree(mqrq_cur->bounce_buf);
+		mqrq_cur->bounce_buf = NULL;
+		return false;
+	}
+
+	return true;
+}
+
 /**
  * mmc_init_queue - initialise a queue structure.
  * @mq: mmc queue
@@ -235,24 +260,8 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card,
 		if (bouncesz > (host->max_blk_count * 512))
 			bouncesz = host->max_blk_count * 512;
 
-		if (bouncesz > 512) {
-			mqrq_cur->bounce_buf = kmalloc(bouncesz, GFP_KERNEL);
-			if (!mqrq_cur->bounce_buf) {
-				pr_warn("%s: unable to allocate bounce cur buffer\n",
-					mmc_card_name(card));
-			} else {
-				mqrq_prev->bounce_buf =
-						kmalloc(bouncesz, GFP_KERNEL);
-				if (!mqrq_prev->bounce_buf) {
-					pr_warn("%s: unable to allocate bounce prev buffer\n",
-						mmc_card_name(card));
-					kfree(mqrq_cur->bounce_buf);
-					mqrq_cur->bounce_buf = NULL;
-				}
-			}
-		}
-
-		if (mqrq_cur->bounce_buf && mqrq_prev->bounce_buf) {
+		if (bouncesz > 512 &&
+		    mmc_queue_alloc_bounce_bufs(mq, bouncesz)) {
 			blk_queue_bounce_limit(mq->queue, BLK_BOUNCE_ANY);
 			blk_queue_max_hw_sectors(mq->queue, bouncesz / 512);
 			blk_queue_max_segments(mq->queue, bouncesz / 512);
-- 
1.9.1

[PATCH V8 05/20] mmc: queue: Factor out mmc_queue_alloc_bounce_sgs()

[Adrian Hunter]

In preparation for supporting a queue of requests, factor out
mmc_queue_alloc_bounce_sgs().

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Harjani Ritesh <riteshh@codeaurora.org>
---
 drivers/mmc/card/queue.c | 44 ++++++++++++++++++++++++++++----------------
 1 file changed, 28 insertions(+), 16 deletions(-)

diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c
index 4497a218c245..3fd27c684292 100644
--- a/drivers/mmc/card/queue.c
+++ b/drivers/mmc/card/queue.c
@@ -211,6 +211,30 @@ static bool mmc_queue_alloc_bounce_bufs(struct mmc_queue *mq,
 	return true;
 }
 
+static int mmc_queue_alloc_bounce_sgs(struct mmc_queue *mq,
+				      unsigned int bouncesz)
+{
+	struct mmc_queue_req *mqrq_cur = mq->mqrq_cur;
+	struct mmc_queue_req *mqrq_prev = mq->mqrq_prev;
+	int ret;
+
+	mqrq_cur->sg = mmc_alloc_sg(1, &ret);
+	if (ret)
+		return ret;
+
+	mqrq_cur->bounce_sg = mmc_alloc_sg(bouncesz / 512, &ret);
+	if (ret)
+		return ret;
+
+	mqrq_prev->sg = mmc_alloc_sg(1, &ret);
+	if (ret)
+		return ret;
+
+	mqrq_prev->bounce_sg = mmc_alloc_sg(bouncesz / 512, &ret);
+
+	return ret;
+}
+
 /**
  * mmc_init_queue - initialise a queue structure.
  * @mq: mmc queue
@@ -225,6 +249,7 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card,
 {
 	struct mmc_host *host = card->host;
 	u64 limit = BLK_BOUNCE_HIGH;
+	bool bounce = false;
 	int ret;
 	struct mmc_queue_req *mqrq_cur = &mq->mqrq[0];
 	struct mmc_queue_req *mqrq_prev = &mq->mqrq[1];
@@ -267,28 +292,15 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card,
 			blk_queue_max_segments(mq->queue, bouncesz / 512);
 			blk_queue_max_segment_size(mq->queue, bouncesz);
 
-			mqrq_cur->sg = mmc_alloc_sg(1, &ret);
-			if (ret)
-				goto cleanup_queue;
-
-			mqrq_cur->bounce_sg =
-				mmc_alloc_sg(bouncesz / 512, &ret);
-			if (ret)
-				goto cleanup_queue;
-
-			mqrq_prev->sg = mmc_alloc_sg(1, &ret);
-			if (ret)
-				goto cleanup_queue;
-
-			mqrq_prev->bounce_sg =
-				mmc_alloc_sg(bouncesz / 512, &ret);
+			ret = mmc_queue_alloc_bounce_sgs(mq, bouncesz);
 			if (ret)
 				goto cleanup_queue;
+			bounce = true;
 		}
 	}
 #endif
 
-	if (!mqrq_cur->bounce_buf && !mqrq_prev->bounce_buf) {
+	if (!bounce) {
 		blk_queue_bounce_limit(mq->queue, limit);
 		blk_queue_max_hw_sectors(mq->queue,
 			min(host->max_blk_count, host->max_req_size / 512));
-- 
1.9.1

[PATCH V8 06/20] mmc: queue: Factor out mmc_queue_alloc_sgs()

[Adrian Hunter]

In preparation for supporting a queue of requests, factor out
mmc_queue_alloc_sgs().

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Harjani Ritesh <riteshh@codeaurora.org>
---
 drivers/mmc/card/queue.c | 22 ++++++++++++++++------
 1 file changed, 16 insertions(+), 6 deletions(-)

diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c
index 3fd27c684292..0a8480f5ea4b 100644
--- a/drivers/mmc/card/queue.c
+++ b/drivers/mmc/card/queue.c
@@ -235,6 +235,21 @@ static int mmc_queue_alloc_bounce_sgs(struct mmc_queue *mq,
 	return ret;
 }
 
+static int mmc_queue_alloc_sgs(struct mmc_queue *mq, int max_segs)
+{
+	struct mmc_queue_req *mqrq_cur = mq->mqrq_cur;
+	struct mmc_queue_req *mqrq_prev = mq->mqrq_prev;
+	int ret;
+
+	mqrq_cur->sg = mmc_alloc_sg(max_segs, &ret);
+	if (ret)
+		return ret;
+
+	mqrq_prev->sg = mmc_alloc_sg(max_segs, &ret);
+
+	return ret;
+}
+
 /**
  * mmc_init_queue - initialise a queue structure.
  * @mq: mmc queue
@@ -307,12 +322,7 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card,
 		blk_queue_max_segments(mq->queue, host->max_segs);
 		blk_queue_max_segment_size(mq->queue, host->max_seg_size);
 
-		mqrq_cur->sg = mmc_alloc_sg(host->max_segs, &ret);
-		if (ret)
-			goto cleanup_queue;
-
-
-		mqrq_prev->sg = mmc_alloc_sg(host->max_segs, &ret);
+		ret = mmc_queue_alloc_sgs(mq, host->max_segs);
 		if (ret)
 			goto cleanup_queue;
 	}
-- 
1.9.1

[PATCH V8 07/20] mmc: queue: Factor out mmc_queue_reqs_free_bufs()

[Adrian Hunter]

In preparation for supporting a queue of requests, factor out
mmc_queue_reqs_free_bufs().

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Harjani Ritesh <riteshh@codeaurora.org>
---
 drivers/mmc/card/queue.c | 65 +++++++++++++++++++-----------------------------
 1 file changed, 26 insertions(+), 39 deletions(-)

diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c
index 0a8480f5ea4b..7234cc48097e 100644
--- a/drivers/mmc/card/queue.c
+++ b/drivers/mmc/card/queue.c
@@ -250,6 +250,27 @@ static int mmc_queue_alloc_sgs(struct mmc_queue *mq, int max_segs)
 	return ret;
 }
 
+static void mmc_queue_reqs_free_bufs(struct mmc_queue *mq)
+{
+	struct mmc_queue_req *mqrq_cur = mq->mqrq_cur;
+	struct mmc_queue_req *mqrq_prev = mq->mqrq_prev;
+
+	kfree(mqrq_cur->bounce_sg);
+	mqrq_cur->bounce_sg = NULL;
+	kfree(mqrq_prev->bounce_sg);
+	mqrq_prev->bounce_sg = NULL;
+
+	kfree(mqrq_cur->sg);
+	mqrq_cur->sg = NULL;
+	kfree(mqrq_cur->bounce_buf);
+	mqrq_cur->bounce_buf = NULL;
+
+	kfree(mqrq_prev->sg);
+	mqrq_prev->sg = NULL;
+	kfree(mqrq_prev->bounce_buf);
+	mqrq_prev->bounce_buf = NULL;
+}
+
 /**
  * mmc_init_queue - initialise a queue structure.
  * @mq: mmc queue
@@ -266,8 +287,6 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card,
 	u64 limit = BLK_BOUNCE_HIGH;
 	bool bounce = false;
 	int ret;
-	struct mmc_queue_req *mqrq_cur = &mq->mqrq[0];
-	struct mmc_queue_req *mqrq_prev = &mq->mqrq[1];
 
 	if (mmc_dev(host)->dma_mask && *mmc_dev(host)->dma_mask)
 		limit = (u64)dma_max_pfn(mmc_dev(host)) << PAGE_SHIFT;
@@ -277,8 +296,8 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card,
 	if (!mq->queue)
 		return -ENOMEM;
 
-	mq->mqrq_cur = mqrq_cur;
-	mq->mqrq_prev = mqrq_prev;
+	mq->mqrq_cur = &mq->mqrq[0];
+	mq->mqrq_prev = &mq->mqrq[1];
 	mq->queue->queuedata = mq;
 
 	blk_queue_prep_rq(mq->queue, mmc_prep_request);
@@ -334,27 +353,13 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card,
 
 	if (IS_ERR(mq->thread)) {
 		ret = PTR_ERR(mq->thread);
-		goto free_bounce_sg;
+		goto cleanup_queue;
 	}
 
 	return 0;
- free_bounce_sg:
-	kfree(mqrq_cur->bounce_sg);
-	mqrq_cur->bounce_sg = NULL;
-	kfree(mqrq_prev->bounce_sg);
-	mqrq_prev->bounce_sg = NULL;
 
  cleanup_queue:
-	kfree(mqrq_cur->sg);
-	mqrq_cur->sg = NULL;
-	kfree(mqrq_cur->bounce_buf);
-	mqrq_cur->bounce_buf = NULL;
-
-	kfree(mqrq_prev->sg);
-	mqrq_prev->sg = NULL;
-	kfree(mqrq_prev->bounce_buf);
-	mqrq_prev->bounce_buf = NULL;
-
+	mmc_queue_reqs_free_bufs(mq);
 	blk_cleanup_queue(mq->queue);
 	return ret;
 }
@@ -363,8 +368,6 @@ void mmc_cleanup_queue(struct mmc_queue *mq)
 {
 	struct request_queue *q = mq->queue;
 	unsigned long flags;
-	struct mmc_queue_req *mqrq_cur = mq->mqrq_cur;
-	struct mmc_queue_req *mqrq_prev = mq->mqrq_prev;
 
 	/* Make sure the queue isn't suspended, as that will deadlock */
 	mmc_queue_resume(mq);
@@ -378,23 +381,7 @@ void mmc_cleanup_queue(struct mmc_queue *mq)
 	blk_start_queue(q);
 	spin_unlock_irqrestore(q->queue_lock, flags);
 
-	kfree(mqrq_cur->bounce_sg);
-	mqrq_cur->bounce_sg = NULL;
-
-	kfree(mqrq_cur->sg);
-	mqrq_cur->sg = NULL;
-
-	kfree(mqrq_cur->bounce_buf);
-	mqrq_cur->bounce_buf = NULL;
-
-	kfree(mqrq_prev->bounce_sg);
-	mqrq_prev->bounce_sg = NULL;
-
-	kfree(mqrq_prev->sg);
-	mqrq_prev->sg = NULL;
-
-	kfree(mqrq_prev->bounce_buf);
-	mqrq_prev->bounce_buf = NULL;
+	mmc_queue_reqs_free_bufs(mq);
 
 	mq->card = NULL;
 }
-- 
1.9.1

[PATCH V8 08/20] mmc: queue: Introduce queue depth and use it to allocate and free

[Adrian Hunter]

Add a mmc_queue member to record the size of the queue, which currently
supports 2 requests on-the-go at a time. Instead of allocating resources
for 2 slots in the queue, allow for an arbitrary number.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
---
 drivers/mmc/card/queue.c | 115 +++++++++++++++++++++++------------------------
 drivers/mmc/card/queue.h |   3 +-
 2 files changed, 59 insertions(+), 59 deletions(-)

diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c
index 7234cc48097e..48197545b539 100644
--- a/drivers/mmc/card/queue.c
+++ b/drivers/mmc/card/queue.c
@@ -189,86 +189,75 @@ static void mmc_queue_setup_discard(struct request_queue *q,
 static bool mmc_queue_alloc_bounce_bufs(struct mmc_queue *mq,
 					unsigned int bouncesz)
 {
-	struct mmc_queue_req *mqrq_cur = mq->mqrq_cur;
-	struct mmc_queue_req *mqrq_prev = mq->mqrq_prev;
-
-	mqrq_cur->bounce_buf = kmalloc(bouncesz, GFP_KERNEL);
-	if (!mqrq_cur->bounce_buf) {
-		pr_warn("%s: unable to allocate bounce cur buffer\n",
-			mmc_card_name(mq->card));
-		return false;
-	}
+	int i;
 
-	mqrq_prev->bounce_buf = kmalloc(bouncesz, GFP_KERNEL);
-	if (!mqrq_prev->bounce_buf) {
-		pr_warn("%s: unable to allocate bounce prev buffer\n",
-			mmc_card_name(mq->card));
-		kfree(mqrq_cur->bounce_buf);
-		mqrq_cur->bounce_buf = NULL;
-		return false;
+	for (i = 0; i < mq->qdepth; i++) {
+		mq->mqrq[i].bounce_buf = kmalloc(bouncesz, GFP_KERNEL);
+		if (!mq->mqrq[i].bounce_buf)
+			goto out_err;
 	}
 
 	return true;
+
+out_err:
+	while (--i >= 0) {
+		kfree(mq->mqrq[i].bounce_buf);
+		mq->mqrq[i].bounce_buf = NULL;
+	}
+	pr_warn("%s: unable to allocate bounce buffers\n",
+		mmc_card_name(mq->card));
+	return false;
 }
 
 static int mmc_queue_alloc_bounce_sgs(struct mmc_queue *mq,
 				      unsigned int bouncesz)
 {
-	struct mmc_queue_req *mqrq_cur = mq->mqrq_cur;
-	struct mmc_queue_req *mqrq_prev = mq->mqrq_prev;
-	int ret;
-
-	mqrq_cur->sg = mmc_alloc_sg(1, &ret);
-	if (ret)
-		return ret;
-
-	mqrq_cur->bounce_sg = mmc_alloc_sg(bouncesz / 512, &ret);
-	if (ret)
-		return ret;
+	int i, ret;
 
-	mqrq_prev->sg = mmc_alloc_sg(1, &ret);
-	if (ret)
-		return ret;
+	for (i = 0; i < mq->qdepth; i++) {
+		mq->mqrq[i].sg = mmc_alloc_sg(1, &ret);
+		if (ret)
+			return ret;
 
-	mqrq_prev->bounce_sg = mmc_alloc_sg(bouncesz / 512, &ret);
+		mq->mqrq[i].bounce_sg = mmc_alloc_sg(bouncesz / 512, &ret);
+		if (ret)
+			return ret;
+	}
 
-	return ret;
+	return 0;
 }
 
 static int mmc_queue_alloc_sgs(struct mmc_queue *mq, int max_segs)
 {
-	struct mmc_queue_req *mqrq_cur = mq->mqrq_cur;
-	struct mmc_queue_req *mqrq_prev = mq->mqrq_prev;
-	int ret;
+	int i, ret;
 
-	mqrq_cur->sg = mmc_alloc_sg(max_segs, &ret);
-	if (ret)
-		return ret;
+	for (i = 0; i < mq->qdepth; i++) {
+		mq->mqrq[i].sg = mmc_alloc_sg(max_segs, &ret);
+		if (ret)
+			return ret;
+	}
 
-	mqrq_prev->sg = mmc_alloc_sg(max_segs, &ret);
+	return 0;
+}
 
-	return ret;
+static void mmc_queue_req_free_bufs(struct mmc_queue_req *mqrq)
+{
+	kfree(mqrq->bounce_sg);
+	mqrq->bounce_sg = NULL;
+
+	kfree(mqrq->sg);
+	mqrq->sg = NULL;
+
+	kfree(mqrq->bounce_buf);
+	mqrq->bounce_buf = NULL;
 }
 
 static void mmc_queue_reqs_free_bufs(struct mmc_queue *mq)
 {
-	struct mmc_queue_req *mqrq_cur = mq->mqrq_cur;
-	struct mmc_queue_req *mqrq_prev = mq->mqrq_prev;
-
-	kfree(mqrq_cur->bounce_sg);
-	mqrq_cur->bounce_sg = NULL;
-	kfree(mqrq_prev->bounce_sg);
-	mqrq_prev->bounce_sg = NULL;
-
-	kfree(mqrq_cur->sg);
-	mqrq_cur->sg = NULL;
-	kfree(mqrq_cur->bounce_buf);
-	mqrq_cur->bounce_buf = NULL;
-
-	kfree(mqrq_prev->sg);
-	mqrq_prev->sg = NULL;
-	kfree(mqrq_prev->bounce_buf);
-	mqrq_prev->bounce_buf = NULL;
+	int i;
+
+	for (i = 0; i < mq->qdepth; i++)
+		mmc_queue_req_free_bufs(&mq->mqrq[i]);
 }
 
 /**
@@ -286,7 +275,7 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card,
 	struct mmc_host *host = card->host;
 	u64 limit = BLK_BOUNCE_HIGH;
 	bool bounce = false;
-	int ret;
+	int ret = -ENOMEM;
 
 	if (mmc_dev(host)->dma_mask && *mmc_dev(host)->dma_mask)
 		limit = (u64)dma_max_pfn(mmc_dev(host)) << PAGE_SHIFT;
@@ -296,6 +285,11 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card,
 	if (!mq->queue)
 		return -ENOMEM;
 
+	mq->qdepth = 2;
+	mq->mqrq = kcalloc(mq->qdepth, sizeof(struct mmc_queue_req),
+			   GFP_KERNEL);
+	if (!mq->mqrq)
+		goto blk_cleanup;
 	mq->mqrq_cur = &mq->mqrq[0];
 	mq->mqrq_prev = &mq->mqrq[1];
 	mq->queue->queuedata = mq;
@@ -360,6 +354,9 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card,
 
  cleanup_queue:
 	mmc_queue_reqs_free_bufs(mq);
+	kfree(mq->mqrq);
+	mq->mqrq = NULL;
+blk_cleanup:
 	blk_cleanup_queue(mq->queue);
 	return ret;
 }
@@ -382,6 +379,8 @@ void mmc_cleanup_queue(struct mmc_queue *mq)
 	spin_unlock_irqrestore(q->queue_lock, flags);
 
 	mmc_queue_reqs_free_bufs(mq);
+	kfree(mq->mqrq);
+	mq->mqrq = NULL;
 
 	mq->card = NULL;
 }
diff --git a/drivers/mmc/card/queue.h b/drivers/mmc/card/queue.h
index d09fce655800..dac8c3d010dd 100644
--- a/drivers/mmc/card/queue.h
+++ b/drivers/mmc/card/queue.h
@@ -42,9 +42,10 @@ struct mmc_queue {
 	bool			asleep;
 	struct mmc_blk_data	*blkdata;
 	struct request_queue	*queue;
-	struct mmc_queue_req	mqrq[2];
+	struct mmc_queue_req	*mqrq;
 	struct mmc_queue_req	*mqrq_cur;
 	struct mmc_queue_req	*mqrq_prev;
+	int			qdepth;
 };
 
 extern int mmc_init_queue(struct mmc_queue *, struct mmc_card *, spinlock_t *,
-- 
1.9.1

[PATCH V8 09/20] mmc: mmc: Add Command Queue definitions

[Adrian Hunter]

Add definitions relating to Command Queuing.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
---
 drivers/mmc/core/mmc.c   | 18 ++++++++++++++++++
 include/linux/mmc/card.h |  2 ++
 include/linux/mmc/mmc.h  | 17 +++++++++++++++++
 3 files changed, 37 insertions(+)

diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 3268fcd3378d..16cf6ea6e1ba 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -618,6 +618,24 @@ static int mmc_decode_ext_csd(struct mmc_card *card, u8 *ext_csd)
 			(ext_csd[EXT_CSD_SUPPORTED_MODE] & 0x1) &&
 			!(ext_csd[EXT_CSD_FW_CONFIG] & 0x1);
 	}
+
+	/* eMMC v5.1 or later */
+	if (card->ext_csd.rev >= 8) {
+		card->ext_csd.cmdq_support = ext_csd[EXT_CSD_CMDQ_SUPPORT] &
+					     EXT_CSD_CMDQ_SUPPORTED;
+		card->ext_csd.cmdq_depth = (ext_csd[EXT_CSD_CMDQ_DEPTH] &
+					    EXT_CSD_CMDQ_DEPTH_MASK) + 1;
+		/* Exclude inefficiently small queue depths */
+		if (card->ext_csd.cmdq_depth <= 2) {
+			card->ext_csd.cmdq_support = false;
+			card->ext_csd.cmdq_depth = 0;
+		}
+		if (card->ext_csd.cmdq_support) {
+			pr_debug("%s: Command Queue supported depth %u\n",
+				 mmc_hostname(card->host),
+				 card->ext_csd.cmdq_depth);
+		}
+	}
 out:
 	return err;
 }
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index e49a3ff9d0e0..95d69d498296 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -89,6 +89,8 @@ struct mmc_ext_csd {
 	unsigned int		boot_ro_lock;		/* ro lock support */
 	bool			boot_ro_lockable;
 	bool			ffu_capable;	/* Firmware upgrade support */
+	bool			cmdq_support;	/* Command Queue supported */
+	unsigned int		cmdq_depth;	/* Command Queue depth */
 #define MMC_FIRMWARE_LEN 8
 	u8			fwrev[MMC_FIRMWARE_LEN];  /* FW version */
 	u8			raw_exception_status;	/* 54 */
diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
index c376209c70ef..672730acc705 100644
--- a/include/linux/mmc/mmc.h
+++ b/include/linux/mmc/mmc.h
@@ -84,6 +84,13 @@
 #define MMC_APP_CMD              55   /* ac   [31:16] RCA        R1  */
 #define MMC_GEN_CMD              56   /* adtc [0] RD/WR          R1  */
 
+  /* class 11 */
+#define MMC_QUE_TASK_PARAMS      44   /* ac   [20:16] task id    R1  */
+#define MMC_QUE_TASK_ADDR        45   /* ac   [31:0] data addr   R1  */
+#define MMC_EXECUTE_READ_TASK    46   /* adtc [20:16] task id    R1  */
+#define MMC_EXECUTE_WRITE_TASK   47   /* adtc [20:16] task id    R1  */
+#define MMC_CMDQ_TASK_MGMT       48   /* ac   [20:16] task id    R1b */
+
 static inline bool mmc_op_multi(u32 opcode)
 {
 	return opcode == MMC_WRITE_MULTIPLE_BLOCK ||
@@ -272,6 +279,7 @@ struct _mmc_csd {
  * EXT_CSD fields
  */
 
+#define EXT_CSD_CMDQ_MODE_EN		15	/* R/W */
 #define EXT_CSD_FLUSH_CACHE		32      /* W */
 #define EXT_CSD_CACHE_CTRL		33      /* R/W */
 #define EXT_CSD_POWER_OFF_NOTIFICATION	34	/* R/W */
@@ -331,6 +339,8 @@ struct _mmc_csd {
 #define EXT_CSD_CACHE_SIZE		249	/* RO, 4 bytes */
 #define EXT_CSD_PWR_CL_DDR_200_360	253	/* RO */
 #define EXT_CSD_FIRMWARE_VERSION	254	/* RO, 8 bytes */
+#define EXT_CSD_CMDQ_DEPTH		307	/* RO */
+#define EXT_CSD_CMDQ_SUPPORT		308	/* RO */
 #define EXT_CSD_SUPPORTED_MODE		493	/* RO */
 #define EXT_CSD_TAG_UNIT_SIZE		498	/* RO */
 #define EXT_CSD_DATA_TAG_SUPPORT	499	/* RO */
@@ -438,6 +448,13 @@ struct _mmc_csd {
 #define EXT_CSD_MANUAL_BKOPS_MASK	0x01
 
 /*
+ * Command Queue
+ */
+#define EXT_CSD_CMDQ_MODE_ENABLED	BIT(0)
+#define EXT_CSD_CMDQ_DEPTH_MASK		GENMASK(4, 0)
+#define EXT_CSD_CMDQ_SUPPORTED		BIT(0)
+
+/*
  * MMC_SWITCH access modes
  */
 
-- 
1.9.1

[PATCH V8 10/20] mmc: mmc: Add functions to enable / disable the Command Queue

[Adrian Hunter]

Add helper functions to enable or disable the Command Queue.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
---
 Documentation/mmc/mmc-dev-attrs.txt |  1 +
 drivers/mmc/core/mmc.c              |  2 ++
 drivers/mmc/core/mmc_ops.c          | 28 ++++++++++++++++++++++++++++
 include/linux/mmc/card.h            |  1 +
 include/linux/mmc/core.h            |  2 ++
 5 files changed, 34 insertions(+)

diff --git a/Documentation/mmc/mmc-dev-attrs.txt b/Documentation/mmc/mmc-dev-attrs.txt
index 404a0e9e92b0..dcd1252877fb 100644
--- a/Documentation/mmc/mmc-dev-attrs.txt
+++ b/Documentation/mmc/mmc-dev-attrs.txt
@@ -30,6 +30,7 @@ All attributes are read-only.
 	rel_sectors		Reliable write sector count
 	ocr 			Operation Conditions Register
 	dsr			Driver Stage Register
+	cmdq_en			Command Queue enabled: 1 => enabled, 0 => not enabled
 
 Note on Erase Size and Preferred Erase Size:
 
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 16cf6ea6e1ba..76432ebc0b06 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -771,6 +771,7 @@ static int mmc_compare_ext_csds(struct mmc_card *card, unsigned bus_width)
 MMC_DEV_ATTR(raw_rpmb_size_mult, "%#x\n", card->ext_csd.raw_rpmb_size_mult);
 MMC_DEV_ATTR(rel_sectors, "%#x\n", card->ext_csd.rel_sectors);
 MMC_DEV_ATTR(ocr, "%08x\n", card->ocr);
+MMC_DEV_ATTR(cmdq_en, "%d\n", card->ext_csd.cmdq_en);
 
 static ssize_t mmc_fwrev_show(struct device *dev,
 			      struct device_attribute *attr,
@@ -824,6 +825,7 @@ static ssize_t mmc_dsr_show(struct device *dev,
 	&dev_attr_rel_sectors.attr,
 	&dev_attr_ocr.attr,
 	&dev_attr_dsr.attr,
+	&dev_attr_cmdq_en.attr,
 	NULL,
 };
 ATTRIBUTE_GROUPS(mmc_std);
diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index 9b2617cfff67..896a8818e901 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -824,3 +824,31 @@ int mmc_can_ext_csd(struct mmc_card *card)
 {
 	return (card && card->csd.mmca_vsn > CSD_SPEC_VER_3);
 }
+
+static int mmc_cmdq_switch(struct mmc_card *card, bool enable)
+{
+	u8 val = enable ? EXT_CSD_CMDQ_MODE_ENABLED : 0;
+	int err;
+
+	if (!card->ext_csd.cmdq_support)
+		return -EOPNOTSUPP;
+
+	err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_CMDQ_MODE_EN,
+			 val, card->ext_csd.generic_cmd6_time);
+	if (!err)
+		card->ext_csd.cmdq_en = enable;
+
+	return err;
+}
+
+int mmc_cmdq_enable(struct mmc_card *card)
+{
+	return mmc_cmdq_switch(card, true);
+}
+EXPORT_SYMBOL_GPL(mmc_cmdq_enable);
+
+int mmc_cmdq_disable(struct mmc_card *card)
+{
+	return mmc_cmdq_switch(card, false);
+}
+EXPORT_SYMBOL_GPL(mmc_cmdq_disable);
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index 95d69d498296..2d9c24f4e88e 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -89,6 +89,7 @@ struct mmc_ext_csd {
 	unsigned int		boot_ro_lock;		/* ro lock support */
 	bool			boot_ro_lockable;
 	bool			ffu_capable;	/* Firmware upgrade support */
+	bool			cmdq_en;	/* Command Queue enabled */
 	bool			cmdq_support;	/* Command Queue supported */
 	unsigned int		cmdq_depth;	/* Command Queue depth */
 #define MMC_FIRMWARE_LEN 8
diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h
index 0ce928b3ce90..d045b06fc7ea 100644
--- a/include/linux/mmc/core.h
+++ b/include/linux/mmc/core.h
@@ -177,6 +177,8 @@ extern int mmc_wait_for_app_cmd(struct mmc_host *, struct mmc_card *,
 extern int mmc_switch(struct mmc_card *, u8, u8, u8, unsigned int);
 extern int mmc_send_tuning(struct mmc_host *host, u32 opcode, int *cmd_error);
 extern int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd);
+extern int mmc_cmdq_enable(struct mmc_card *card);
+extern int mmc_cmdq_disable(struct mmc_card *card);
 
 #define MMC_ERASE_ARG		0x00000000
 #define MMC_SECURE_ERASE_ARG	0x80000000
-- 
1.9.1

[PATCH V8 11/20] mmc: mmc_test: Disable Command Queue while mmc_test is used

[Adrian Hunter]

Normal read and write commands may not be used while the command queue is
enabled. Disable the Command Queue when mmc_test is probed and re-enable it
when it is removed.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Harjani Ritesh <riteshh@codeaurora.org>
---
 drivers/mmc/card/mmc_test.c | 13 +++++++++++++
 drivers/mmc/core/mmc.c      |  7 +++++++
 include/linux/mmc/card.h    |  1 +
 3 files changed, 21 insertions(+)

diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c
index 5ba6d77b9723..b42c23665104 100644
--- a/drivers/mmc/card/mmc_test.c
+++ b/drivers/mmc/card/mmc_test.c
@@ -3264,6 +3264,14 @@ static int mmc_test_probe(struct mmc_card *card)
 	if (ret)
 		return ret;
 
+	if (card->ext_csd.cmdq_en) {
+		mmc_claim_host(card->host);
+		ret = mmc_cmdq_disable(card);
+		mmc_release_host(card->host);
+		if (ret)
+			return ret;
+	}
+
 	dev_info(&card->dev, "Card claimed for testing.\n");
 
 	return 0;
@@ -3271,6 +3279,11 @@ static int mmc_test_probe(struct mmc_card *card)
 
 static void mmc_test_remove(struct mmc_card *card)
 {
+	if (card->reenable_cmdq) {
+		mmc_claim_host(card->host);
+		mmc_cmdq_enable(card);
+		mmc_release_host(card->host);
+	}
 	mmc_test_free_result(card);
 	mmc_test_free_dbgfs_file(card);
 }
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 76432ebc0b06..720759a81296 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -1756,6 +1756,13 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 	}
 
 	/*
+	 * In some cases (e.g. RPMB or mmc_test), the Command Queue must be
+	 * disabled for a time, so a flag is needed to indicate to re-enable the
+	 * Command Queue.
+	 */
+	card->reenable_cmdq = card->ext_csd.cmdq_en;
+
+	/*
 	 * The mandatory minimum values are defined for packed command.
 	 * read: 5, write: 3
 	 */
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index 2d9c24f4e88e..5ac2243bc5a9 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -273,6 +273,7 @@ struct mmc_card {
 #define MMC_QUIRK_TRIM_BROKEN	(1<<12)		/* Skip trim */
 #define MMC_QUIRK_BROKEN_HPI	(1<<13)		/* Disable broken HPI support */
 
+	bool			reenable_cmdq;	/* Re-enable Command Queue */
 
 	unsigned int		erase_size;	/* erase size in sectors */
  	unsigned int		erase_shift;	/* if erase unit is power 2 */
-- 
1.9.1

[PATCH V8 12/20] mmc: block: Disable Command Queue while RPMB is used

[Adrian Hunter]

RPMB does not allow Command Queue commands. Disable and re-enable the
Command Queue when switching.

Note that the driver only switches partitions when the queue is empty.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Harjani Ritesh <riteshh@codeaurora.org>
---
 drivers/mmc/card/block.c | 46 ++++++++++++++++++++++++++++++++++++++--------
 1 file changed, 38 insertions(+), 8 deletions(-)

diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 646d1a1fa6ca..e84e2d8f6e31 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -725,10 +725,41 @@ static int mmc_blk_compat_ioctl(struct block_device *bdev, fmode_t mode,
 #endif
 };
 
+static int mmc_blk_part_switch_pre(struct mmc_card *card,
+				   unsigned int part_type)
+{
+	int ret = 0;
+
+	if (part_type == EXT_CSD_PART_CONFIG_ACC_RPMB) {
+		if (card->ext_csd.cmdq_en) {
+			ret = mmc_cmdq_disable(card);
+			if (ret)
+				return ret;
+		}
+		mmc_retune_pause(card->host);
+	}
+
+	return ret;
+}
+
+static int mmc_blk_part_switch_post(struct mmc_card *card,
+				    unsigned int part_type)
+{
+	int ret = 0;
+
+	if (part_type == EXT_CSD_PART_CONFIG_ACC_RPMB) {
+		mmc_retune_unpause(card->host);
+		if (card->reenable_cmdq && !card->ext_csd.cmdq_en)
+			ret = mmc_cmdq_enable(card);
+	}
+
+	return ret;
+}
+
 static inline int mmc_blk_part_switch(struct mmc_card *card,
 				      struct mmc_blk_data *md)
 {
-	int ret;
+	int ret = 0;
 	struct mmc_blk_data *main_md = dev_get_drvdata(&card->dev);
 
 	if (main_md->part_curr == md->part_type)
@@ -737,8 +768,9 @@ static inline int mmc_blk_part_switch(struct mmc_card *card,
 	if (mmc_card_mmc(card)) {
 		u8 part_config = card->ext_csd.part_config;
 
-		if (md->part_type == EXT_CSD_PART_CONFIG_ACC_RPMB)
-			mmc_retune_pause(card->host);
+		ret = mmc_blk_part_switch_pre(card, md->part_type);
+		if (ret)
+			return ret;
 
 		part_config &= ~EXT_CSD_PART_CONFIG_ACC_MASK;
 		part_config |= md->part_type;
@@ -747,19 +779,17 @@ static inline int mmc_blk_part_switch(struct mmc_card *card,
 				 EXT_CSD_PART_CONFIG, part_config,
 				 card->ext_csd.part_time);
 		if (ret) {
-			if (md->part_type == EXT_CSD_PART_CONFIG_ACC_RPMB)
-				mmc_retune_unpause(card->host);
+			mmc_blk_part_switch_post(card, md->part_type);
 			return ret;
 		}
 
 		card->ext_csd.part_config = part_config;
 
-		if (main_md->part_curr == EXT_CSD_PART_CONFIG_ACC_RPMB)
-			mmc_retune_unpause(card->host);
+		ret = mmc_blk_part_switch_post(card, main_md->part_curr);
 	}
 
 	main_md->part_curr = md->part_type;
-	return 0;
+	return ret;
 }
 
 static u32 mmc_sd_num_wr_blocks(struct mmc_card *card)
-- 
1.9.1

[PATCH V8 13/20] mmc: core: Do not prepare a new request twice

[Adrian Hunter]

mmc_start_req() assumes it is never called with the new request already
prepared. That is true if the queue consists of only 2 requests, but is not
true for a longer queue. e.g. mmc_start_req() has a current and previous
request but still exits to queue a new request if the queue size is
greater than 2. In that case, when mmc_start_req() is called again, the
current request will have been prepared already. Fix by flagging if the
request has been prepared.

That also means ensuring that struct mmc_async_req is always initialized
to zero, which wasn't the case in mmc_test.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Harjani Ritesh <riteshh@codeaurora.org>
---
 drivers/mmc/card/mmc_test.c |  8 ++++----
 drivers/mmc/core/core.c     | 12 +++++++++---
 include/linux/mmc/host.h    |  1 +
 3 files changed, 14 insertions(+), 7 deletions(-)

diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c
index b42c23665104..81a71d28239a 100644
--- a/drivers/mmc/card/mmc_test.c
+++ b/drivers/mmc/card/mmc_test.c
@@ -826,7 +826,10 @@ static int mmc_test_nonblock_transfer(struct mmc_test_card *test,
 	struct mmc_command stop2;
 	struct mmc_data data2;
 
-	struct mmc_test_async_req test_areq[2];
+	struct mmc_test_async_req test_areq[2] = {
+		{ .test = test },
+		{ .test = test },
+	};
 	struct mmc_async_req *done_areq;
 	struct mmc_async_req *cur_areq = &test_areq[0].areq;
 	struct mmc_async_req *other_areq = &test_areq[1].areq;
@@ -834,9 +837,6 @@ static int mmc_test_nonblock_transfer(struct mmc_test_card *test,
 	int i;
 	int ret = RESULT_OK;
 
-	test_areq[0].test = test;
-	test_areq[1].test = test;
-
 	mmc_test_nonblock_reset(&mrq1, &cmd1, &stop1, &data1);
 	mmc_test_nonblock_reset(&mrq2, &cmd2, &stop2, &data2);
 
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index dc1f27ee50b8..28e1495ac903 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -658,8 +658,10 @@ struct mmc_async_req *mmc_start_req(struct mmc_host *host,
 	struct mmc_async_req *data = host->areq;
 
 	/* Prepare a new request */
-	if (areq)
+	if (areq && !areq->pre_req_done) {
+		areq->pre_req_done = true;
 		mmc_pre_req(host, areq->mrq);
+	}
 
 	if (host->areq) {
 		status = mmc_wait_for_data_req_done(host, host->areq->mrq, areq);
@@ -695,12 +697,16 @@ struct mmc_async_req *mmc_start_req(struct mmc_host *host,
 	if (status == MMC_BLK_SUCCESS && areq)
 		start_err = __mmc_start_data_req(host, areq->mrq);
 
-	if (host->areq)
+	if (host->areq) {
+		host->areq->pre_req_done = false;
 		mmc_post_req(host, host->areq->mrq, 0);
+	}
 
 	 /* Cancel a prepared request if it was not started. */
-	if ((status != MMC_BLK_SUCCESS || start_err) && areq)
+	if ((status != MMC_BLK_SUCCESS || start_err) && areq) {
+		areq->pre_req_done = false;
 		mmc_post_req(host, areq->mrq, -EINVAL);
+	}
 
 	if (status != MMC_BLK_SUCCESS)
 		host->areq = NULL;
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 8bc884121465..69f796d21c76 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -173,6 +173,7 @@ struct mmc_async_req {
 	 * Returns 0 if success otherwise non zero.
 	 */
 	enum mmc_blk_status (*err_check)(struct mmc_card *, struct mmc_async_req *);
+	bool pre_req_done;
 };
 
 /**
-- 
1.9.1

[PATCH V8 14/20] mmc: core: Export mmc_retune_hold() and mmc_retune_release()

[Adrian Hunter]

Re-tuning can only be done when the Command Queue is empty, when means
holding and releasing re-tuning from the block driver, so export those
functions.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Harjani Ritesh <riteshh@codeaurora.org>
---
 drivers/mmc/core/host.c  | 2 ++
 drivers/mmc/core/host.h  | 2 --
 include/linux/mmc/core.h | 3 +++
 3 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index 98f25ffb4258..878405e28bdb 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -112,6 +112,7 @@ void mmc_retune_hold(struct mmc_host *host)
 		host->retune_now = 1;
 	host->hold_retune += 1;
 }
+EXPORT_SYMBOL(mmc_retune_hold);
 
 void mmc_retune_release(struct mmc_host *host)
 {
@@ -120,6 +121,7 @@ void mmc_retune_release(struct mmc_host *host)
 	else
 		WARN_ON(1);
 }
+EXPORT_SYMBOL(mmc_retune_release);
 
 int mmc_retune(struct mmc_host *host)
 {
diff --git a/drivers/mmc/core/host.h b/drivers/mmc/core/host.h
index 992bf5397633..0787b3002481 100644
--- a/drivers/mmc/core/host.h
+++ b/drivers/mmc/core/host.h
@@ -17,8 +17,6 @@
 
 void mmc_retune_enable(struct mmc_host *host);
 void mmc_retune_disable(struct mmc_host *host);
-void mmc_retune_hold(struct mmc_host *host);
-void mmc_retune_release(struct mmc_host *host);
 int mmc_retune(struct mmc_host *host);
 
 #endif
diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h
index d045b06fc7ea..d8f46e1ae7f2 100644
--- a/include/linux/mmc/core.h
+++ b/include/linux/mmc/core.h
@@ -220,6 +220,9 @@ extern int mmc_set_blockcount(struct mmc_card *card, unsigned int blockcount,
 
 extern int mmc_detect_card_removed(struct mmc_host *host);
 
+extern void mmc_retune_hold(struct mmc_host *host);
+extern void mmc_retune_release(struct mmc_host *host);
+
 /**
  *	mmc_claim_host - exclusively claim a host
  *	@host: mmc host to claim
-- 
1.9.1

[PATCH V8 15/20] mmc: block: Use local var for mqrq_cur

[Adrian Hunter]

A subsequent patch will remove 'mq->mqrq_cur'. Prepare for that by
assigning it to a local variable.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
---
 drivers/mmc/card/block.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index e84e2d8f6e31..fdeb3f335fd5 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -1630,6 +1630,7 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc)
 	struct mmc_blk_request *brq;
 	int ret = 1, disable_multi = 0, retry = 0, type, retune_retry_done = 0;
 	enum mmc_blk_status status;
+	struct mmc_queue_req *mqrq_cur = mq->mqrq_cur;
 	struct mmc_queue_req *mq_rq;
 	struct request *req;
 	struct mmc_async_req *areq;
@@ -1647,14 +1648,14 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc)
 				!IS_ALIGNED(blk_rq_sectors(rqc), 8)) {
 				pr_err("%s: Transfer size is not 4KB sector size aligned\n",
 					rqc->rq_disk->disk_name);
-				mq_rq = mq->mqrq_cur;
+				mq_rq = mqrq_cur;
 				req = rqc;
 				rqc = NULL;
 				goto cmd_abort;
 			}
 
-			mmc_blk_rw_rq_prep(mq->mqrq_cur, card, 0, mq);
-			areq = &mq->mqrq_cur->mmc_active;
+			mmc_blk_rw_rq_prep(mqrq_cur, card, 0, mq);
+			areq = &mqrq_cur->mmc_active;
 		} else
 			areq = NULL;
 		areq = mmc_start_req(card->host, areq, &status);
@@ -1774,9 +1775,9 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc)
 			rqc->cmd_flags |= REQ_QUIET;
 			blk_end_request_all(rqc, -EIO);
 		} else {
-			mmc_blk_rw_rq_prep(mq->mqrq_cur, card, 0, mq);
+			mmc_blk_rw_rq_prep(mqrq_cur, card, 0, mq);
 			mmc_start_req(card->host,
-				      &mq->mqrq_cur->mmc_active, NULL);
+				      &mqrq_cur->mmc_active, NULL);
 		}
 	}
 
-- 
1.9.1

[PATCH V8 16/20] mmc: block: Introduce queue semantics

[Adrian Hunter]

Change from viewing the requests in progress as 'current' and 'previous',
to viewing them as a queue. The current request is allocated to the first
free slot. The presence of incomplete requests is determined from the
count (mq->qcnt) of entries in the queue. Non-read-write requests (i.e.
discards and flushes) are not added to the queue at all and require no
special handling. Also no special handling is needed for the
MMC_BLK_NEW_REQUEST case.

As well as allowing an arbitrarily sized queue, the queue thread function
is significantly simpler.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
---
 drivers/mmc/card/block.c | 49 +++++++++++++++++++------------
 drivers/mmc/card/queue.c | 76 ++++++++++++++++++++++++++++++------------------
 drivers/mmc/card/queue.h | 10 +++++--
 3 files changed, 85 insertions(+), 50 deletions(-)

diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index fdeb3f335fd5..6ead9f64cd1c 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -129,6 +129,13 @@ static inline int mmc_blk_part_switch(struct mmc_card *card,
 				      struct mmc_blk_data *md);
 static int get_card_status(struct mmc_card *card, u32 *status, int retries);
 
+static void mmc_blk_requeue(struct request_queue *q, struct request *req)
+{
+	spin_lock_irq(q->queue_lock);
+	blk_requeue_request(q, req);
+	spin_unlock_irq(q->queue_lock);
+}
+
 static struct mmc_blk_data *mmc_blk_get(struct gendisk *disk)
 {
 	struct mmc_blk_data *md;
@@ -1630,12 +1637,21 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc)
 	struct mmc_blk_request *brq;
 	int ret = 1, disable_multi = 0, retry = 0, type, retune_retry_done = 0;
 	enum mmc_blk_status status;
-	struct mmc_queue_req *mqrq_cur = mq->mqrq_cur;
+	struct mmc_queue_req *mqrq_cur = NULL;
 	struct mmc_queue_req *mq_rq;
 	struct request *req;
 	struct mmc_async_req *areq;
 
-	if (!rqc && !mq->mqrq_prev->req)
+	if (rqc) {
+		mqrq_cur = mmc_queue_req_find(mq, rqc);
+		if (!mqrq_cur) {
+			WARN_ON(1);
+			mmc_blk_requeue(mq->queue, rqc);
+			rqc = NULL;
+		}
+	}
+
+	if (!mq->qcnt)
 		return 0;
 
 	do {
@@ -1659,11 +1675,8 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc)
 		} else
 			areq = NULL;
 		areq = mmc_start_req(card->host, areq, &status);
-		if (!areq) {
-			if (status == MMC_BLK_NEW_REQUEST)
-				mq->flags |= MMC_QUEUE_NEW_REQUEST;
+		if (!areq)
 			return 0;
-		}
 
 		mq_rq = container_of(areq, struct mmc_queue_req, mmc_active);
 		brq = &mq_rq->brq;
@@ -1760,6 +1773,8 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc)
 		}
 	} while (ret);
 
+	mmc_queue_req_free(mq, mq_rq);
+
 	return 1;
 
  cmd_abort:
@@ -1774,6 +1789,7 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc)
 		if (mmc_card_removed(card)) {
 			rqc->cmd_flags |= REQ_QUIET;
 			blk_end_request_all(rqc, -EIO);
+			mmc_queue_req_free(mq, mqrq_cur);
 		} else {
 			mmc_blk_rw_rq_prep(mqrq_cur, card, 0, mq);
 			mmc_start_req(card->host,
@@ -1781,6 +1797,8 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc)
 		}
 	}
 
+	mmc_queue_req_free(mq, mq_rq);
+
 	return 0;
 }
 
@@ -1789,9 +1807,8 @@ int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 	int ret;
 	struct mmc_blk_data *md = mq->blkdata;
 	struct mmc_card *card = md->queue.card;
-	bool req_is_special = mmc_req_is_special(req);
 
-	if (req && !mq->mqrq_prev->req)
+	if (req && !mq->qcnt)
 		/* claim host only for the first request */
 		mmc_get_card(card);
 
@@ -1804,20 +1821,19 @@ int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 		goto out;
 	}
 
-	mq->flags &= ~MMC_QUEUE_NEW_REQUEST;
 	if (req && req_op(req) == REQ_OP_DISCARD) {
 		/* complete ongoing async transfer before issuing discard */
-		if (card->host->areq)
+		if (mq->qcnt)
 			mmc_blk_issue_rw_rq(mq, NULL);
 		ret = mmc_blk_issue_discard_rq(mq, req);
 	} else if (req && req_op(req) == REQ_OP_SECURE_ERASE) {
 		/* complete ongoing async transfer before issuing secure erase*/
-		if (card->host->areq)
+		if (mq->qcnt)
 			mmc_blk_issue_rw_rq(mq, NULL);
 		ret = mmc_blk_issue_secdiscard_rq(mq, req);
 	} else if (req && req_op(req) == REQ_OP_FLUSH) {
 		/* complete ongoing async transfer before issuing flush */
-		if (card->host->areq)
+		if (mq->qcnt)
 			mmc_blk_issue_rw_rq(mq, NULL);
 		ret = mmc_blk_issue_flush(mq, req);
 	} else {
@@ -1825,13 +1841,8 @@ int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 	}
 
 out:
-	if ((!req && !(mq->flags & MMC_QUEUE_NEW_REQUEST)) || req_is_special)
-		/*
-		 * Release host when there are no more requests
-		 * and after special request(discard, flush) is done.
-		 * In case sepecial request, there is no reentry to
-		 * the 'mmc_blk_issue_rq' with 'mqrq_prev->req'.
-		 */
+	/* Release host when there are no more requests */
+	if (!mq->qcnt)
 		mmc_put_card(card);
 	return ret;
 }
diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c
index 48197545b539..34e5be6b94ae 100644
--- a/drivers/mmc/card/queue.c
+++ b/drivers/mmc/card/queue.c
@@ -49,6 +49,35 @@ static int mmc_prep_request(struct request_queue *q, struct request *req)
 	return BLKPREP_OK;
 }
 
+struct mmc_queue_req *mmc_queue_req_find(struct mmc_queue *mq,
+					 struct request *req)
+{
+	struct mmc_queue_req *mqrq;
+	int i = ffz(mq->qslots);
+
+	if (i >= mq->qdepth)
+		return NULL;
+
+	mqrq = &mq->mqrq[i];
+	WARN_ON(mqrq->req || mq->qcnt >= mq->qdepth ||
+		test_bit(mqrq->task_id, &mq->qslots));
+	mqrq->req = req;
+	mq->qcnt += 1;
+	__set_bit(mqrq->task_id, &mq->qslots);
+
+	return mqrq;
+}
+
+void mmc_queue_req_free(struct mmc_queue *mq,
+			struct mmc_queue_req *mqrq)
+{
+	WARN_ON(!mqrq->req || mq->qcnt < 1 ||
+		!test_bit(mqrq->task_id, &mq->qslots));
+	mqrq->req = NULL;
+	mq->qcnt -= 1;
+	__clear_bit(mqrq->task_id, &mq->qslots);
+}
+
 static int mmc_queue_thread(void *d)
 {
 	struct mmc_queue *mq = d;
@@ -59,7 +88,7 @@ static int mmc_queue_thread(void *d)
 
 	down(&mq->thread_sem);
 	do {
-		struct request *req = NULL;
+		struct request *req;
 
 		spin_lock_irq(q->queue_lock);
 		set_current_state(TASK_INTERRUPTIBLE);
@@ -72,38 +101,17 @@ static int mmc_queue_thread(void *d)
 			 * Dispatch queue is empty so set flags for
 			 * mmc_request_fn() to wake us up.
 			 */
-			if (mq->mqrq_prev->req)
+			if (mq->qcnt)
 				cntx->is_waiting_last_req = true;
 			else
 				mq->asleep = true;
 		}
-		mq->mqrq_cur->req = req;
 		spin_unlock_irq(q->queue_lock);
 
-		if (req || mq->mqrq_prev->req) {
-			bool req_is_special = mmc_req_is_special(req);
-
+		if (req || mq->qcnt) {
 			set_current_state(TASK_RUNNING);
 			mmc_blk_issue_rq(mq, req);
 			cond_resched();
-			if (mq->flags & MMC_QUEUE_NEW_REQUEST) {
-				mq->flags &= ~MMC_QUEUE_NEW_REQUEST;
-				continue; /* fetch again */
-			}
-
-			/*
-			 * Current request becomes previous request
-			 * and vice versa.
-			 * In case of special requests, current request
-			 * has been finished. Do not assign it to previous
-			 * request.
-			 */
-			if (req_is_special)
-				mq->mqrq_cur->req = NULL;
-
-			mq->mqrq_prev->brq.mrq.data = NULL;
-			mq->mqrq_prev->req = NULL;
-			swap(mq->mqrq_prev, mq->mqrq_cur);
 		} else {
 			if (kthread_should_stop()) {
 				set_current_state(TASK_RUNNING);
@@ -186,6 +194,21 @@ static void mmc_queue_setup_discard(struct request_queue *q,
 		queue_flag_set_unlocked(QUEUE_FLAG_SECERASE, q);
 }
 
+static struct mmc_queue_req *mmc_queue_alloc_mqrqs(struct mmc_queue *mq,
+						   int qdepth)
+{
+	struct mmc_queue_req *mqrq;
+	int i;
+
+	mqrq = kcalloc(qdepth, sizeof(*mqrq), GFP_KERNEL);
+	if (mqrq) {
+		for (i = 0; i < mq->qdepth; i++)
+			mqrq[i].task_id = i;
+	}
+
+	return mqrq;
+}
+
 static bool mmc_queue_alloc_bounce_bufs(struct mmc_queue *mq,
 					unsigned int bouncesz)
 {
@@ -286,12 +309,9 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card,
 		return -ENOMEM;
 
 	mq->qdepth = 2;
-	mq->mqrq = kcalloc(mq->qdepth, sizeof(struct mmc_queue_req),
-			   GFP_KERNEL);
+	mq->mqrq = mmc_queue_alloc_mqrqs(mq, mq->qdepth);
 	if (!mq->mqrq)
 		goto blk_cleanup;
-	mq->mqrq_cur = &mq->mqrq[0];
-	mq->mqrq_prev = &mq->mqrq[1];
 	mq->queue->queuedata = mq;
 
 	blk_queue_prep_rq(mq->queue, mmc_prep_request);
diff --git a/drivers/mmc/card/queue.h b/drivers/mmc/card/queue.h
index dac8c3d010dd..95ca33098e1f 100644
--- a/drivers/mmc/card/queue.h
+++ b/drivers/mmc/card/queue.h
@@ -30,6 +30,7 @@ struct mmc_queue_req {
 	struct scatterlist	*bounce_sg;
 	unsigned int		bounce_sg_len;
 	struct mmc_async_req	mmc_active;
+	int			task_id;
 };
 
 struct mmc_queue {
@@ -38,14 +39,13 @@ struct mmc_queue {
 	struct semaphore	thread_sem;
 	unsigned int		flags;
 #define MMC_QUEUE_SUSPENDED	(1 << 0)
-#define MMC_QUEUE_NEW_REQUEST	(1 << 1)
 	bool			asleep;
 	struct mmc_blk_data	*blkdata;
 	struct request_queue	*queue;
 	struct mmc_queue_req	*mqrq;
-	struct mmc_queue_req	*mqrq_cur;
-	struct mmc_queue_req	*mqrq_prev;
 	int			qdepth;
+	int			qcnt;
+	unsigned long		qslots;
 };
 
 extern int mmc_init_queue(struct mmc_queue *, struct mmc_card *, spinlock_t *,
@@ -61,4 +61,8 @@ extern unsigned int mmc_queue_map_sg(struct mmc_queue *,
 
 extern int mmc_access_rpmb(struct mmc_queue *);
 
+extern struct mmc_queue_req *mmc_queue_req_find(struct mmc_queue *,
+						struct request *);
+extern void mmc_queue_req_free(struct mmc_queue *, struct mmc_queue_req *);
+
 #endif
-- 
1.9.1

[PATCH V8 17/20] mmc: queue: Share mmc request array between partitions

[Adrian Hunter]

eMMC can have multiple internal partitions that are represented as separate
disks / queues. However the card has only 1 command queue which must be
empty when switching partitions. Consequently the array of mmc requests
that are queued can be shared between partitions saving memory.

Keep a pointer to the mmc request queue on the card, and use that instead
of allocating a new one for each partition. Use a reference count to keep
track of when to free it. Queues are allocated and deallocated via
mmc_blk_probe() and mmc_blk_probe() so no other synchronization is needed
for the reference count.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
---
 drivers/mmc/card/queue.c | 42 ++++++++++++++++++++++++++++++++++++------
 include/linux/mmc/card.h |  4 ++++
 2 files changed, 40 insertions(+), 6 deletions(-)

diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c
index 34e5be6b94ae..63daf53b7246 100644
--- a/drivers/mmc/card/queue.c
+++ b/drivers/mmc/card/queue.c
@@ -200,10 +200,22 @@ static struct mmc_queue_req *mmc_queue_alloc_mqrqs(struct mmc_queue *mq,
 	struct mmc_queue_req *mqrq;
 	int i;
 
+	if (mq->card->mqrq) {
+		/*
+		 * Queues are allocated and deallocated via mmc_blk_probe() and
+		 * mmc_blk_probe() so no other synchronization is needed for
+		 * mqrq_ref_cnt.
+		 */
+		mq->card->mqrq_ref_cnt += 1;
+		return mq->card->mqrq;
+	}
+
 	mqrq = kcalloc(qdepth, sizeof(*mqrq), GFP_KERNEL);
 	if (mqrq) {
 		for (i = 0; i < mq->qdepth; i++)
 			mqrq[i].task_id = i;
+		mq->card->mqrq = mqrq;
+		mq->card->mqrq_ref_cnt = 1;
 	}
 
 	return mqrq;
@@ -214,6 +226,9 @@ static bool mmc_queue_alloc_bounce_bufs(struct mmc_queue *mq,
 {
 	int i;
 
+	if (mq->card->mqrq_ref_cnt > 1)
+		return !!mq->mqrq[0].bounce_buf;
+
 	for (i = 0; i < mq->qdepth; i++) {
 		mq->mqrq[i].bounce_buf = kmalloc(bouncesz, GFP_KERNEL);
 		if (!mq->mqrq[i].bounce_buf)
@@ -237,6 +252,9 @@ static int mmc_queue_alloc_bounce_sgs(struct mmc_queue *mq,
 {
 	int i, ret;
 
+	if (mq->card->mqrq_ref_cnt > 1)
+		return 0;
+
 	for (i = 0; i < mq->qdepth; i++) {
 		mq->mqrq[i].sg = mmc_alloc_sg(1, &ret);
 		if (ret)
@@ -254,6 +272,9 @@ static int mmc_queue_alloc_sgs(struct mmc_queue *mq, int max_segs)
 {
 	int i, ret;
 
+	if (mq->card->mqrq_ref_cnt > 1)
+		return 0;
+
 	for (i = 0; i < mq->qdepth; i++) {
 		mq->mqrq[i].sg = mmc_alloc_sg(max_segs, &ret);
 		if (ret)
@@ -283,6 +304,19 @@ static void mmc_queue_reqs_free_bufs(struct mmc_queue *mq)
 		mmc_queue_req_free_bufs(&mq->mqrq[i]);
 }
 
+static void mmc_queue_free_mqrqs(struct mmc_queue *mq)
+{
+	if (!mq->mqrq)
+		return;
+
+	if (!--mq->card->mqrq_ref_cnt) {
+		mmc_queue_reqs_free_bufs(mq);
+		kfree(mq->card->mqrq);
+		mq->card->mqrq = NULL;
+	}
+	mq->mqrq = NULL;
+}
+
 /**
  * mmc_init_queue - initialise a queue structure.
  * @mq: mmc queue
@@ -373,9 +407,7 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card,
 	return 0;
 
  cleanup_queue:
-	mmc_queue_reqs_free_bufs(mq);
-	kfree(mq->mqrq);
-	mq->mqrq = NULL;
+	mmc_queue_free_mqrqs(mq);
 blk_cleanup:
 	blk_cleanup_queue(mq->queue);
 	return ret;
@@ -398,9 +430,7 @@ void mmc_cleanup_queue(struct mmc_queue *mq)
 	blk_start_queue(q);
 	spin_unlock_irqrestore(q->queue_lock, flags);
 
-	mmc_queue_reqs_free_bufs(mq);
-	kfree(mq->mqrq);
-	mq->mqrq = NULL;
+	mmc_queue_free_mqrqs(mq);
 
 	mq->card = NULL;
 }
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index 5ac2243bc5a9..47399bcab659 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -207,6 +207,7 @@ struct sdio_cis {
 struct mmc_ios;
 struct sdio_func;
 struct sdio_func_tuple;
+struct mmc_queue_req;
 
 #define SDIO_MAX_FUNCS		7
 
@@ -308,6 +309,9 @@ struct mmc_card {
 	struct dentry		*debugfs_root;
 	struct mmc_part	part[MMC_NUM_PHY_PARTITION]; /* physical partitions */
 	unsigned int    nr_parts;
+
+	struct mmc_queue_req	*mqrq;		/* Shared queue structure */
+	unsigned int		mqrq_ref_cnt;	/* Shared queue ref. count */
 };
 
 /*
-- 
1.9.1

[PATCH V8 18/20] mmc: queue: Add a function to control wake-up on new requests

[Adrian Hunter]

Add a function to control wake-up on new requests. This will enable
Software Command Queuing to choose whether or not to queue new
requests immediately or wait for the current task to complete.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
---
 drivers/mmc/card/queue.c | 16 ++++++++++++++++
 drivers/mmc/card/queue.h |  2 ++
 2 files changed, 18 insertions(+)

diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c
index 63daf53b7246..3f9a229a480e 100644
--- a/drivers/mmc/card/queue.c
+++ b/drivers/mmc/card/queue.c
@@ -97,6 +97,7 @@ static int mmc_queue_thread(void *d)
 		cntx->is_waiting_last_req = false;
 		cntx->is_new_req = false;
 		if (!req) {
+			mq->is_new_req = false;
 			/*
 			 * Dispatch queue is empty so set flags for
 			 * mmc_request_fn() to wake us up.
@@ -147,6 +148,8 @@ static void mmc_request_fn(struct request_queue *q)
 		return;
 	}
 
+	mq->is_new_req = true;
+
 	cntx = &mq->card->host->context_info;
 
 	if (cntx->is_waiting_last_req) {
@@ -158,6 +161,19 @@ static void mmc_request_fn(struct request_queue *q)
 		wake_up_process(mq->thread);
 }
 
+void mmc_queue_set_wake(struct mmc_queue *mq, bool wake_me)
+{
+	struct mmc_context_info *cntx = &mq->card->host->context_info;
+	struct request_queue *q = mq->queue;
+
+	if (cntx->is_waiting_last_req != wake_me) {
+		spin_lock_irq(q->queue_lock);
+		cntx->is_waiting_last_req = wake_me;
+		cntx->is_new_req = wake_me && mq->is_new_req;
+		spin_unlock_irq(q->queue_lock);
+	}
+}
+
 static struct scatterlist *mmc_alloc_sg(int sg_len, int *err)
 {
 	struct scatterlist *sg;
diff --git a/drivers/mmc/card/queue.h b/drivers/mmc/card/queue.h
index 95ca33098e1f..23e115f4c78d 100644
--- a/drivers/mmc/card/queue.h
+++ b/drivers/mmc/card/queue.h
@@ -40,6 +40,7 @@ struct mmc_queue {
 	unsigned int		flags;
 #define MMC_QUEUE_SUSPENDED	(1 << 0)
 	bool			asleep;
+	bool			is_new_req;
 	struct mmc_blk_data	*blkdata;
 	struct request_queue	*queue;
 	struct mmc_queue_req	*mqrq;
@@ -64,5 +65,6 @@ extern unsigned int mmc_queue_map_sg(struct mmc_queue *,
 extern struct mmc_queue_req *mmc_queue_req_find(struct mmc_queue *,
 						struct request *);
 extern void mmc_queue_req_free(struct mmc_queue *, struct mmc_queue_req *);
+extern void mmc_queue_set_wake(struct mmc_queue *, bool);
 
 #endif
-- 
1.9.1

[PATCH V8 19/20] mmc: block: Add Software Command Queuing

[Adrian Hunter]

eMMC Command Queuing is a feature added in version 5.1.  The card maintains
a queue of up to 32 data transfers.  Commands CMD44/CMD45 are sent to queue
up transfers in advance, and then one of the transfers is selected to
"execute" by CMD46/CMD47 at which point data transfer actually begins.

The advantage of command queuing is that the card can prepare for transfers
in advance. That makes a big difference in the case of random reads because
the card can start reading into its cache in advance.

A v5.1 host controller can manage the command queue itself, but it is also
possible for software to manage the queue using an non-v5.1 host controller
- that is what Software Command Queuing is.

Refer to the JEDEC (http://www.jedec.org/) eMMC v5.1 Specification for more
information about Command Queuing.

Two important aspects of Command Queuing that affect the implementation
are:
 - only read/write requests are queued
 - the queue must be empty to send other commands, including re-tuning

To support Software Command Queuing a separate function is provided to
issue read/write requests (i.e. mmc_swcmdq_issue_rw_rq()) and the
mmc_blk_request structure amended to cater for additional commands CMD44
and CMD45. There is a separate function (mmc_swcmdq_prep()) to prepare the
needed commands, but transfers are started by mmc_start_req() like normal.

mmc_swcmdq_issue_rw_rq() enqueues the new request and then executes tasks
until the queue is empty or mmc_swcmdq_execute() asks for a new request.
This puts mmc_swcmdq_execute() in control of the decision whether to queue
more requests or wait for the active one.

Recovery is invoked if anything goes wrong. Recovery has 2 options:
 1. Discard the queue and re-queue all requests. If that fails, fall back
    to option 2.
 2. Reset and re-queue all requests. If that fails, error out all the
    requests.
In either case, re-tuning will be done if needed after the queue becomes
empty because re-tuning is released at that point.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
---
 drivers/mmc/card/block.c | 591 ++++++++++++++++++++++++++++++++++++++++++++++-
 drivers/mmc/card/queue.c |   6 +-
 drivers/mmc/card/queue.h |  11 +-
 include/linux/mmc/core.h |   1 +
 4 files changed, 606 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 6ead9f64cd1c..60193ff47926 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -108,6 +108,7 @@ struct mmc_blk_data {
 #define MMC_BLK_WRITE		BIT(1)
 #define MMC_BLK_DISCARD		BIT(2)
 #define MMC_BLK_SECDISCARD	BIT(3)
+#define MMC_BLK_SWCMDQ		BIT(4)
 
 	/*
 	 * Only set in main mmc_blk_data associated
@@ -1630,7 +1631,584 @@ static int mmc_blk_cmd_err(struct mmc_blk_data *md, struct mmc_card *card,
 	return ret;
 }
 
-static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc)
+static enum mmc_blk_status mmc_swcmdq_err_check(struct mmc_card *card,
+						struct mmc_async_req *areq)
+{
+	struct mmc_queue_req *mqrq = container_of(areq, struct mmc_queue_req,
+						  mmc_active);
+	struct mmc_blk_request *brq = &mqrq->brq;
+	struct request *req = mqrq->req;
+	int err;
+
+	err = brq->data.error;
+	/* In the case of data errors, send stop */
+	if (err)
+		mmc_wait_for_cmd(card->host, &brq->stop, 0);
+	else
+		err = brq->cmd.error;
+
+	/* In the case of CRC errors when re-tuning is needed, retry */
+	if (err == -EILSEQ && card->host->need_retune)
+		return MMC_BLK_RETRY;
+
+	/* For other errors abort */
+	if (err)
+		return MMC_BLK_ABORT;
+
+	if (blk_rq_bytes(req) != brq->data.bytes_xfered)
+		return MMC_BLK_PARTIAL;
+
+	return MMC_BLK_SUCCESS;
+}
+
+static void mmc_swcmdq_prep(struct mmc_queue *mq, struct mmc_queue_req *mqrq)
+{
+	struct mmc_blk_data *md = mq->blkdata;
+	struct mmc_card *card = md->queue.card;
+	struct mmc_blk_request *brq = &mqrq->brq;
+	struct request *req = mqrq->req;
+	bool do_data_tag;
+
+	/*
+	 * Reliable writes are used to implement Forced Unit Access and
+	 * are supported only on MMCs.
+	 */
+	bool do_rel_wr = (req->cmd_flags & REQ_FUA) &&
+		(rq_data_dir(req) == WRITE) &&
+		(md->flags & MMC_BLK_REL_WR);
+
+	memset(brq, 0, sizeof(struct mmc_blk_request));
+	brq->mrq.cmd = &brq->cmd;
+	brq->mrq.data = &brq->data;
+	brq->mrq.cap_cmd_during_tfr = true;
+
+	if (rq_data_dir(req) == READ) {
+		brq->cmd.opcode = MMC_EXECUTE_READ_TASK;
+		brq->data.flags = MMC_DATA_READ;
+		brq->stop.flags = MMC_RSP_R1 | MMC_CMD_AC;
+	} else {
+		brq->cmd.opcode = MMC_EXECUTE_WRITE_TASK;
+		brq->data.flags = MMC_DATA_WRITE;
+		brq->stop.flags = MMC_RSP_R1B | MMC_CMD_AC;
+	}
+	brq->cmd.arg = mqrq->task_id << 16;
+	brq->cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
+
+	brq->data.blksz = 512;
+	brq->data.blocks = blk_rq_sectors(req);
+
+	brq->stop.opcode = MMC_STOP_TRANSMISSION;
+	brq->stop.arg = 0;
+
+	/*
+	 * The block layer doesn't support all sector count
+	 * restrictions, so we need to be prepared for too big
+	 * requests.
+	 */
+	if (brq->data.blocks > card->host->max_blk_count)
+		brq->data.blocks = card->host->max_blk_count;
+
+	if (do_rel_wr)
+		mmc_apply_rel_rw(brq, card, req);
+
+	/*
+	 * Data tag is used only during writing meta data to speed
+	 * up write and any subsequent read of this meta data
+	 */
+	do_data_tag = (card->ext_csd.data_tag_unit_size) &&
+		(req->cmd_flags & REQ_META) &&
+		(rq_data_dir(req) == WRITE) &&
+		((brq->data.blocks * brq->data.blksz) >=
+		 card->ext_csd.data_tag_unit_size);
+
+	brq->cmd44.opcode = MMC_QUE_TASK_PARAMS;
+	brq->cmd44.arg = brq->data.blocks |
+			 (do_rel_wr ? (1 << 31) : 0) |
+			 ((rq_data_dir(req) == READ) ? (1 << 30) : 0) |
+			 (do_data_tag ? (1 << 29) : 0) |
+			 mqrq->task_id << 16;
+	brq->cmd44.flags = MMC_RSP_R1 | MMC_CMD_AC;
+
+	brq->cmd45.opcode = MMC_QUE_TASK_ADDR;
+	brq->cmd45.arg = blk_rq_pos(req);
+
+	mmc_set_data_timeout(&brq->data, card);
+
+	brq->data.sg = mqrq->sg;
+	brq->data.sg_len = mmc_queue_map_sg(mq, mqrq);
+
+	/*
+	 * Adjust the sg list so it is the same size as the
+	 * request.
+	 */
+	if (brq->data.blocks != blk_rq_sectors(req)) {
+		int i, data_size = brq->data.blocks << 9;
+		struct scatterlist *sg;
+
+		for_each_sg(brq->data.sg, sg, brq->data.sg_len, i) {
+			data_size -= sg->length;
+			if (data_size <= 0) {
+				sg->length += data_size;
+				i++;
+				break;
+			}
+		}
+		brq->data.sg_len = i;
+	}
+
+	mqrq->mmc_active.mrq = &brq->mrq;
+	mqrq->mmc_active.err_check = mmc_swcmdq_err_check;
+
+	mmc_queue_bounce_pre(mqrq);
+}
+
+static int mmc_swcmdq_blk_err(struct mmc_card *card, int err)
+{
+	/* Re-try after CRC errors when re-tuning is needed */
+	if (err == -EILSEQ && card->host->need_retune)
+		return MMC_BLK_RETRY;
+
+	if (err)
+		return MMC_BLK_ABORT;
+
+	return 0;
+}
+
+#define SWCMDQ_ENQUEUE_ERR (	\
+	R1_OUT_OF_RANGE |	\
+	R1_ADDRESS_ERROR |	\
+	R1_BLOCK_LEN_ERROR |	\
+	R1_WP_VIOLATION |	\
+	R1_CC_ERROR |		\
+	R1_ERROR |		\
+	R1_COM_CRC_ERROR |	\
+	R1_ILLEGAL_COMMAND)
+
+static int __mmc_swcmdq_enqueue(struct mmc_queue *mq,
+				struct mmc_queue_req *mqrq)
+{
+	struct mmc_card *card = mq->card;
+	int err;
+
+	mmc_swcmdq_prep(mq, mqrq);
+
+	err = mmc_wait_for_cmd(card->host, &mqrq->brq.cmd44, 0);
+	if (err)
+		goto out;
+
+	err = mmc_wait_for_cmd(card->host, &mqrq->brq.cmd45, 0);
+	if (err)
+		goto out;
+
+	/*
+	 * Don't assume the task is queued if there are any error bits set in
+	 * the response.
+	 */
+	if (mqrq->brq.cmd45.resp[0] & SWCMDQ_ENQUEUE_ERR)
+		return MMC_BLK_ABORT;
+out:
+	return mmc_swcmdq_blk_err(card, err);
+}
+
+static int mmc_swcmdq_enqueue(struct mmc_queue *mq, struct request *req)
+{
+	struct mmc_queue_req *mqrq;
+
+	mqrq = mmc_queue_req_find(mq, req);
+	if (!mqrq) {
+		WARN_ON(1);
+		mmc_blk_requeue(mq->queue, req);
+		return 0;
+	}
+
+	/* Need to hold re-tuning so long as the queue is not empty */
+	if (mq->qcnt == 1)
+		mmc_retune_hold(mq->card->host);
+
+	return __mmc_swcmdq_enqueue(mq, mqrq);
+}
+
+static struct mmc_async_req *mmc_swcmdq_next(struct mmc_queue *mq)
+{
+	int i = __ffs(mq->qsr);
+
+	__clear_bit(i, &mq->qsr);
+
+	if (i >= mq->qdepth)
+		return NULL;
+
+	return &mq->mqrq[i].mmc_active;
+}
+
+static int mmc_get_qsr(struct mmc_card *card, u32 *qsr)
+{
+	struct mmc_command cmd = {0};
+	int err, retries = 3;
+
+	cmd.opcode = MMC_SEND_STATUS;
+	cmd.arg = card->rca << 16 | 1 << 15;
+	cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
+	err = mmc_wait_for_cmd(card->host, &cmd, retries);
+	if (err)
+		return err;
+
+	*qsr = cmd.resp[0];
+
+	return 0;
+}
+
+static int mmc_await_qsr(struct mmc_card *card, u32 *qsr)
+{
+	unsigned long timeout;
+	u32 status = 0;
+	int err;
+
+	timeout = jiffies + msecs_to_jiffies(10 * 1000);
+	while (!status) {
+		err = mmc_get_qsr(card, &status);
+		if (err)
+			return err;
+		if (time_after(jiffies, timeout)) {
+			pr_err("%s: Card stuck with queued tasks\n",
+			       mmc_hostname(card->host));
+			return -ETIMEDOUT;
+		}
+	}
+
+	*qsr = status;
+
+	return 0;
+}
+
+static int mmc_swcmdq_await_qsr(struct mmc_queue *mq, struct mmc_card *card,
+				bool wait)
+{
+	struct mmc_queue_req *mqrq;
+	u32 qsr;
+	int err;
+
+	if (wait)
+		err = mmc_await_qsr(card, &qsr);
+	else
+		err = mmc_get_qsr(card, &qsr);
+	if (err)
+		goto out_err;
+
+	mq->qsr = qsr;
+
+	if (card->host->areq) {
+		/*
+		 * The active request remains in the QSR until completed. Remove
+		 * it so that mq->qsr only contains ones that are ready but not
+		 * executed.
+		 */
+		mqrq = container_of(card->host->areq, struct mmc_queue_req,
+				    mmc_active);
+		__clear_bit(mqrq->task_id, &mq->qsr);
+	}
+
+	if (mq->qsr)
+		mq->qsr_err = false;
+out_err:
+	if (err) {
+		/* Don't repeatedly retry if no progress is made */
+		if (mq->qsr_err)
+			return MMC_BLK_ABORT;
+		mq->qsr_err = true;
+	}
+
+	return mmc_swcmdq_blk_err(card, err);
+}
+
+static int mmc_swcmdq_execute(struct mmc_queue *mq, bool flush, bool requeuing,
+			      bool new_req)
+{
+	struct mmc_card *card = mq->card;
+	struct mmc_async_req *next = NULL, *prev;
+	struct mmc_blk_request *brq;
+	struct mmc_queue_req *mqrq;
+	enum mmc_blk_status status;
+	struct request *req;
+	int active = card->host->areq ? 1 : 0;
+	int ret;
+
+	if (mq->prepared_areq) {
+		/*
+		 * A request that has been prepared before (i.e. passed to
+		 * mmc_start_req()) but not started because another new request
+		 * turned up.
+		 */
+		next = mq->prepared_areq;
+	} else if (requeuing) {
+		/* Just finish the active request */
+		next = NULL;
+	} else if (mq->qsr) {
+		/* Get the next task from the Queue Status Register */
+		next = mmc_swcmdq_next(mq);
+	} else if (mq->qcnt > active) {
+		/*
+		 * There are queued tasks so read the Queue Status Register to
+		 * see if any are ready. Wait for a ready task only if there is
+		 * no active request and no new request.
+		 */
+		ret = mmc_swcmdq_await_qsr(mq, card, !active && !new_req);
+		if (ret)
+			return ret;
+		if (mq->qsr)
+			next = mmc_swcmdq_next(mq);
+	}
+
+	if (next) {
+		/*
+		 * Don't wake for a new request when waiting for the active
+		 * request if there is another request ready to start.
+		 */
+		if (active)
+			mmc_queue_set_wake(mq, false);
+	} else {
+		if (!active)
+			return 0;
+		/*
+		 * Don't wake for a new request when flushing or the queue is
+		 * full.
+		 */
+		if (flush || mq->qcnt == mq->qdepth)
+			mmc_queue_set_wake(mq, false);
+		else
+			mmc_queue_set_wake(mq, true);
+	}
+
+	prev = mmc_start_req(card->host, next, &status);
+
+	if (status == MMC_BLK_NEW_REQUEST) {
+		mq->prepared_areq = next;
+		return status;
+	}
+
+	mq->prepared_areq = NULL;
+
+	if (!prev)
+		return 0;
+
+	mqrq = container_of(prev, struct mmc_queue_req, mmc_active);
+	brq = &mqrq->brq;
+	req = mqrq->req;
+
+	mmc_queue_bounce_post(mqrq);
+
+	switch (status) {
+	case MMC_BLK_SUCCESS:
+	case MMC_BLK_PARTIAL:
+	case MMC_BLK_SUCCESS_ERR:
+		mmc_blk_reset_success(mq->blkdata, MMC_BLK_SWCMDQ);
+		ret = blk_end_request(req, 0, brq->data.bytes_xfered);
+		if (ret) {
+			if (!requeuing)
+				return __mmc_swcmdq_enqueue(mq, mqrq);
+			return 0;
+		}
+		break;
+	case MMC_BLK_NEW_REQUEST:
+		return status;
+	default:
+		if (mqrq->retry_cnt++) {
+			blk_end_request_all(req, -EIO);
+			break;
+		}
+		return status;
+	}
+
+	mmc_queue_req_free(mq, mqrq);
+
+	/* Release re-tuning when queue is empty */
+	if (!mq->qcnt)
+		mmc_retune_release(card->host);
+
+	return 0;
+}
+
+static enum mmc_blk_status mmc_swcmdq_requeue_check(struct mmc_card *card,
+				    struct mmc_async_req *areq)
+{
+	enum mmc_blk_status ret = mmc_swcmdq_err_check(card, areq);
+
+	/*
+	 * In the case of success, prevent mmc_start_req() from starting
+	 * another request by returning MMC_BLK_SUCCESS_ERR.
+	 */
+	return ret == MMC_BLK_SUCCESS ? MMC_BLK_SUCCESS_ERR : ret;
+}
+
+static int mmc_swcmdq_await_active(struct mmc_queue *mq)
+{
+	struct mmc_async_req *areq = mq->card->host->areq;
+	int err;
+
+	if (!areq)
+		return 0;
+
+	areq->err_check = mmc_swcmdq_requeue_check;
+
+	err = mmc_swcmdq_execute(mq, true, true, false);
+
+	/* The request will be requeued anyway, so ignore 'retry' */
+	if (err == MMC_BLK_RETRY)
+		err = 0;
+
+	return err;
+}
+
+static int mmc_swcmdq_discard_queue(struct mmc_queue *mq)
+{
+	struct mmc_command cmd = {0};
+
+	if (!mq->qcnt)
+		return 0;
+
+	mq->qsr = 0;
+
+	cmd.opcode = MMC_CMDQ_TASK_MGMT;
+	cmd.arg = 1; /* Discard entire queue */
+	cmd.flags = MMC_RSP_R1B | MMC_CMD_AC;
+	/* This is for recovery and the response is not needed, so ignore CRC */
+	cmd.flags &= ~MMC_RSP_CRC;
+
+	return mmc_wait_for_cmd(mq->card->host, &cmd, 0);
+}
+
+static int __mmc_swcmdq_requeue(struct mmc_queue *mq)
+{
+	unsigned long i, qslots = mq->qslots;
+	int err;
+
+	if (qslots) {
+		/* Cause re-tuning before next command, if needed */
+		mmc_retune_release(mq->card->host);
+		mmc_retune_hold(mq->card->host);
+	}
+
+	while (qslots) {
+		i = __ffs(qslots);
+		err = __mmc_swcmdq_enqueue(mq, &mq->mqrq[i]);
+		if (err)
+			return err;
+		__clear_bit(i, &qslots);
+	}
+
+	return 0;
+}
+
+static void __mmc_swcmdq_error_out(struct mmc_queue *mq)
+{
+	unsigned long i, qslots = mq->qslots;
+	struct request *req;
+
+	if (qslots)
+		mmc_retune_release(mq->card->host);
+
+	while (qslots) {
+		i = __ffs(qslots);
+		req = mq->mqrq[i].req;
+		blk_end_request_all(req, -EIO);
+		mq->mqrq[i].req = NULL;
+		__clear_bit(i, &qslots);
+	}
+
+	mq->qslots = 0;
+	mq->qcnt = 0;
+}
+
+static int mmc_swcmdq_requeue(struct mmc_queue *mq)
+{
+	int err;
+
+	/* Wait for active request */
+	err = mmc_swcmdq_await_active(mq);
+	if (err)
+		return err;
+
+	err = mmc_swcmdq_discard_queue(mq);
+	if (err)
+		return err;
+
+	return __mmc_swcmdq_requeue(mq);
+}
+
+static void mmc_swcmdq_reset(struct mmc_queue *mq)
+{
+	/* Wait for active request ignoring errors */
+	mmc_swcmdq_await_active(mq);
+
+	/* Ensure the queue is discarded */
+	mmc_swcmdq_discard_queue(mq);
+
+	/* Reset and requeue else error out all requests */
+	if (mmc_blk_reset(mq->blkdata, mq->card->host, MMC_BLK_SWCMDQ) ||
+	    __mmc_swcmdq_requeue(mq))
+		__mmc_swcmdq_error_out(mq);
+}
+
+/*
+ * Recovery has 2 options:
+ * 1. Discard the queue and re-queue all requests. If that fails, fall back to
+ *    option 2.
+ * 2. Reset and re-queue all requests. If that fails, error out all the
+ *    requests.
+ * In either case, re-tuning will be done if needed after the queue becomes
+ * empty because re-tuning is released at that point.
+ */
+static void mmc_swcmdq_recovery(struct mmc_queue *mq, int err)
+{
+	switch (err) {
+	case MMC_BLK_RETRY:
+		err = mmc_swcmdq_requeue(mq);
+		if (!err)
+			break;
+		/* Fall through */
+	default:
+		mmc_swcmdq_reset(mq);
+	}
+}
+
+static int mmc_swcmdq_issue_rw_rq(struct mmc_queue *mq, struct request *req)
+{
+	struct mmc_context_info *cntx = &mq->card->host->context_info;
+	bool flush = !req && !cntx->is_waiting_last_req;
+	int err;
+
+	/* Enqueue new requests */
+	if (req) {
+		err = mmc_swcmdq_enqueue(mq, req);
+		if (err)
+			mmc_swcmdq_recovery(mq, err);
+	}
+
+	/*
+	 * Keep executing queued requests until the queue is empty or
+	 * mmc_swcmdq_execute() asks for new requests by returning
+	 * MMC_BLK_NEW_REQUEST.
+	 */
+	while (mq->qcnt) {
+		/*
+		 * Re-tuning can only be done when the queue is empty. Recovery
+		 * for MMC_BLK_RETRY will discard the queue and re-queue all
+		 * requests. At the point the queue is empty, re-tuning is
+		 * released and will be done automatically before the next
+		 * mmc_request.
+		 */
+		if (mq->card->host->need_retune)
+			mmc_swcmdq_recovery(mq, MMC_BLK_RETRY);
+		err = mmc_swcmdq_execute(mq, flush, false, !!req);
+		if (err == MMC_BLK_NEW_REQUEST)
+			return 0;
+		if (err)
+			mmc_swcmdq_recovery(mq, err);
+	}
+
+	return 0;
+}
+
+static int __mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc)
 {
 	struct mmc_blk_data *md = mq->blkdata;
 	struct mmc_card *card = md->queue.card;
@@ -1802,6 +2380,17 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc)
 	return 0;
 }
 
+static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *req)
+{
+	struct mmc_blk_data *md = mq->blkdata;
+	struct mmc_card *card = md->queue.card;
+
+	if (card->ext_csd.cmdq_en)
+		return mmc_swcmdq_issue_rw_rq(mq, req);
+	else
+		return __mmc_blk_issue_rw_rq(mq, req);
+}
+
 int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 {
 	int ret;
diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c
index 3f9a229a480e..c55a64e5b76a 100644
--- a/drivers/mmc/card/queue.c
+++ b/drivers/mmc/card/queue.c
@@ -64,6 +64,7 @@ struct mmc_queue_req *mmc_queue_req_find(struct mmc_queue *mq,
 	mqrq->req = req;
 	mq->qcnt += 1;
 	__set_bit(mqrq->task_id, &mq->qslots);
+	mqrq->retry_cnt = 0;
 
 	return mqrq;
 }
@@ -358,7 +359,10 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card,
 	if (!mq->queue)
 		return -ENOMEM;
 
-	mq->qdepth = 2;
+	if (card->ext_csd.cmdq_en)
+		mq->qdepth = card->ext_csd.cmdq_depth;
+	else
+		mq->qdepth = 2;
 	mq->mqrq = mmc_queue_alloc_mqrqs(mq, mq->qdepth);
 	if (!mq->mqrq)
 		goto blk_cleanup;
diff --git a/drivers/mmc/card/queue.h b/drivers/mmc/card/queue.h
index 23e115f4c78d..6c00307ac159 100644
--- a/drivers/mmc/card/queue.h
+++ b/drivers/mmc/card/queue.h
@@ -15,9 +15,13 @@ static inline bool mmc_req_is_special(struct request *req)
 
 struct mmc_blk_request {
 	struct mmc_request	mrq;
-	struct mmc_command	sbc;
+	union {
+		struct mmc_command	sbc;
+		struct mmc_command	cmd44;
+	};
 	struct mmc_command	cmd;
 	struct mmc_command	stop;
+	struct mmc_command	cmd45;
 	struct mmc_data		data;
 	int			retune_retry_done;
 };
@@ -31,6 +35,7 @@ struct mmc_queue_req {
 	unsigned int		bounce_sg_len;
 	struct mmc_async_req	mmc_active;
 	int			task_id;
+	unsigned int		retry_cnt;
 };
 
 struct mmc_queue {
@@ -47,6 +52,10 @@ struct mmc_queue {
 	int			qdepth;
 	int			qcnt;
 	unsigned long		qslots;
+	/* Following are defined for Software Command Queuing */
+	unsigned long		qsr;
+	struct mmc_async_req	*prepared_areq;
+	bool			qsr_err;
 };
 
 extern int mmc_init_queue(struct mmc_queue *, struct mmc_card *, spinlock_t *,
diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h
index d8f46e1ae7f2..03a013c83e31 100644
--- a/include/linux/mmc/core.h
+++ b/include/linux/mmc/core.h
@@ -25,6 +25,7 @@ enum mmc_blk_status {
 	MMC_BLK_ECC_ERR,
 	MMC_BLK_NOMEDIUM,
 	MMC_BLK_NEW_REQUEST,
+	MMC_BLK_SUCCESS_ERR, /* Success but prevent starting another request */
 };
 
 struct mmc_command {
-- 
1.9.1

[PATCH V8 20/20] mmc: mmc: Enable Software Command Queuing

[Adrian Hunter]

Enable the Command Queue if the host controller supports Software Command
Queuing. It is not compatible with Packed Commands, so do not enable that
at the same time.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
---
 drivers/mmc/core/mmc.c | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 720759a81296..7b1a92d79148 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -1755,6 +1755,20 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 		}
 	}
 
+	/* Enable Command Queue if supported */
+	card->ext_csd.cmdq_en = false;
+	if (card->ext_csd.cmdq_support && host->caps & MMC_CAP_CMD_DURING_TFR) {
+		err = mmc_cmdq_enable(card);
+		if (err && err != -EBADMSG)
+			goto free_card;
+		if (err) {
+			pr_warn("%s: Enabling CMDQ failed\n",
+				mmc_hostname(card->host));
+			card->ext_csd.cmdq_support = false;
+			card->ext_csd.cmdq_depth = 0;
+			err = 0;
+		}
+	}
 	/*
 	 * In some cases (e.g. RPMB or mmc_test), the Command Queue must be
 	 * disabled for a time, so a flag is needed to indicate to re-enable the
@@ -1768,7 +1782,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 	 */
 	if (card->ext_csd.max_packed_writes >= 3 &&
 	    card->ext_csd.max_packed_reads >= 5 &&
-	    host->caps2 & MMC_CAP2_PACKED_CMD) {
+	    host->caps2 & MMC_CAP2_PACKED_CMD &&
+	    !card->ext_csd.cmdq_en) {
 		err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
 				EXT_CSD_EXP_EVENTS_CTRL,
 				EXT_CSD_PACKED_EVENT_EN,
-- 
1.9.1

Re: [PATCH V8 00/20] mmc: mmc: Add Software Command Queuing

[Ulf Hansson]

On 29 November 2016 at 11:09, Adrian Hunter <adrian.hunter@intel.com> wrote:
> Hi
>
> Here is an updated version of the Software Command Queuing patches,
> re-based on next, with some changes - refer changes in V8 below.
> It would be good to move at least a few of these patches: for example,
> patches 2-7 could be considered to be tidy-ups.  Patch 1 could be
> rolled into the Packed Commands removal patch.

Hi Adrian,

I decided to move a little further than patch 7, so I have queued up
patch 1 to and including patch 9 for next.

I didn't fold patch 1 into the "packed-command removal patch", but
just put it on top.

Thanks!

Kind regards
Uffe

>
> Performance results (not updated since V5):
>
> Results can vary from run to run, but here are some results showing 1, 2 or 4
> processes with 4k and 32k record sizes.  They show up to 40% improvement in
> read performance when there are multiple processes.
>
> iozone -s 8192k -r 4k -i 0 -i 1 -i 2 -i 8 -I -t 1 -F /mnt/mmc/iozone1.tmp
>
>         Children see throughput for  1 initial writers  =     27909.87 kB/sec     24204.14 kB/sec      -13.28 %
>         Children see throughput for  1 rewriters        =     28839.28 kB/sec     25531.92 kB/sec      -11.47 %
>         Children see throughput for  1 readers          =     25889.65 kB/sec     24883.23 kB/sec       -3.89 %
>         Children see throughput for 1 re-readers        =     25558.23 kB/sec     24679.89 kB/sec       -3.44 %
>         Children see throughput for 1 random readers    =     25571.48 kB/sec     24689.52 kB/sec       -3.45 %
>         Children see throughput for 1 mixed workload    =     25758.59 kB/sec     24487.52 kB/sec       -4.93 %
>         Children see throughput for 1 random writers    =     24787.51 kB/sec     19368.99 kB/sec      -21.86 %
>
> iozone -s 8192k -r 32k -i 0 -i 1 -i 2 -i 8 -I -t 1 -F /mnt/mmc/iozone1.tmp
>
>         Children see throughput for  1 initial writers  =     91344.61 kB/sec    102008.56 kB/sec       11.67 %
>         Children see throughput for  1 rewriters        =     87932.36 kB/sec     96630.44 kB/sec        9.89 %
>         Children see throughput for  1 readers          =    134879.82 kB/sec    110292.79 kB/sec      -18.23 %
>         Children see throughput for 1 re-readers        =    147632.13 kB/sec    109053.33 kB/sec      -26.13 %
>         Children see throughput for 1 random readers    =     93547.37 kB/sec    112225.50 kB/sec       19.97 %
>         Children see throughput for 1 mixed workload    =     93560.04 kB/sec    110515.21 kB/sec       18.12 %
>         Children see throughput for 1 random writers    =     92841.84 kB/sec     81153.81 kB/sec      -12.59 %
>
> iozone -s 8192k -r 4k -i 0 -i 1 -i 2 -i 8 -I -t 2 -F /mnt/mmc/iozone1.tmp /mnt/mmc/iozone2.tmp
>
>         Children see throughput for  2 initial writers  =     31145.43 kB/sec     33771.25 kB/sec        8.43 %
>         Children see throughput for  2 rewriters        =     30592.57 kB/sec     35916.46 kB/sec       17.40 %
>         Children see throughput for  2 readers          =     31669.83 kB/sec     37460.13 kB/sec       18.28 %
>         Children see throughput for 2 re-readers        =     32079.94 kB/sec     37373.33 kB/sec       16.50 %
>         Children see throughput for 2 random readers    =     27731.19 kB/sec     37601.65 kB/sec       35.59 %
>         Children see throughput for 2 mixed workload    =     13927.50 kB/sec     14617.06 kB/sec        4.95 %
>         Children see throughput for 2 random writers    =     31250.00 kB/sec     33106.72 kB/sec        5.94 %
>
> iozone -s 8192k -r 32k -i 0 -i 1 -i 2 -i 8 -I -t 2 -F /mnt/mmc/iozone1.tmp /mnt/mmc/iozone2.tmp
>
>         Children see throughput for  2 initial writers  =    123255.84 kB/sec    131252.22 kB/sec        6.49 %
>         Children see throughput for  2 rewriters        =    115234.91 kB/sec    107225.74 kB/sec       -6.95 %
>         Children see throughput for  2 readers          =    128921.86 kB/sec    148562.71 kB/sec       15.23 %
>         Children see throughput for 2 re-readers        =    127815.24 kB/sec    149304.32 kB/sec       16.81 %
>         Children see throughput for 2 random readers    =    125600.46 kB/sec    148406.56 kB/sec       18.16 %
>         Children see throughput for 2 mixed workload    =     44006.94 kB/sec     50937.36 kB/sec       15.75 %
>         Children see throughput for 2 random writers    =    120623.95 kB/sec    103969.05 kB/sec      -13.81 %
>
> iozone -s 8192k -r 4k -i 0 -i 1 -i 2 -i 8 -I -t 4 -F /mnt/mmc/iozone1.tmp /mnt/mmc/iozone2.tmp /mnt/mmc/iozone3.tmp /mnt/mmc/iozone4.tmp
>
>         Children see throughput for  4 initial writers  =     24100.96 kB/sec     33336.58 kB/sec       38.32 %
>         Children see throughput for  4 rewriters        =     31650.20 kB/sec     33091.53 kB/sec        4.55 %
>         Children see throughput for  4 readers          =     33276.92 kB/sec     41799.89 kB/sec       25.61 %
>         Children see throughput for 4 re-readers        =     31786.96 kB/sec     41501.74 kB/sec       30.56 %
>         Children see throughput for 4 random readers    =     31991.65 kB/sec     40973.93 kB/sec       28.08 %
>         Children see throughput for 4 mixed workload    =     15804.80 kB/sec     13581.32 kB/sec      -14.07 %
>         Children see throughput for 4 random writers    =     31231.42 kB/sec     34537.03 kB/sec       10.58 %
>
> iozone -s 8192k -r 32k -i 0 -i 1 -i 2 -i 8 -I -t 4 -F /mnt/mmc/iozone1.tmp /mnt/mmc/iozone2.tmp /mnt/mmc/iozone3.tmp /mnt/mmc/iozone4.tmp
>
>         Children see throughput for  4 initial writers  =    116567.42 kB/sec    119280.35 kB/sec        2.33 %
>         Children see throughput for  4 rewriters        =    115010.96 kB/sec    120864.34 kB/sec        5.09 %
>         Children see throughput for  4 readers          =    130700.29 kB/sec    177834.21 kB/sec       36.06 %
>         Children see throughput for 4 re-readers        =    125392.58 kB/sec    175975.28 kB/sec       40.34 %
>         Children see throughput for 4 random readers    =    132194.57 kB/sec    176630.46 kB/sec       33.61 %
>         Children see throughput for 4 mixed workload    =     56464.98 kB/sec     54140.61 kB/sec       -4.12 %
>         Children see throughput for 4 random writers    =    109128.36 kB/sec     85359.80 kB/sec      -21.78 %
>
>
> The current block driver supports 2 requests on the go at a time. Patches
> 3 - 8 make preparations for an arbitrary sized queue. Patches 9 - 12
> introduce Command Queue definitions and helpers.  Patches 13 - 16
> complete the job of making the block driver use a queue.  Patches 17 - 20
> finally add Software Command Queuing.  Most of the Software Command Queuing
> functionality is added in patch 19.
>
> As noted below, the patches can also be found here:
>
>         http://git.infradead.org/users/ahunter/linux-sdhci.git/shortlog/refs/heads/swcmdq
>
>         which also includes a debug-only patch to help debug stuck queues:
>             mmc: block: Add debugfs state file for debugging stuck queues
>
> Changes in V8:
>
>   Re-based on next, dropping references to Packed Commands.
>
>   mmc: block: Restore line inadvertently removed with packed commands
>     New patch
>
>   mmc: block: Fix 4K native sector check
>     Moved to be the 2nd patch
>     Added Reviewed-by: Linus Walleij
>
>   mmc: queue: Fix queue thread wake-up
>     Added Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
>     Added Reviewed-by: Harjani Ritesh <riteshh@codeaurora.org>
>
>   mmc: queue: Factor out mmc_queue_alloc_bounce_bufs()
>     Added Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
>     Added Reviewed-by: Harjani Ritesh <riteshh@codeaurora.org>
>
>   mmc: queue: Factor out mmc_queue_alloc_bounce_sgs()
>     Added Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
>     Added Reviewed-by: Harjani Ritesh <riteshh@codeaurora.org>
>
>   mmc: queue: Factor out mmc_queue_alloc_sgs()
>     Added Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
>     Added Reviewed-by: Harjani Ritesh <riteshh@codeaurora.org>
>
>   mmc: queue: Factor out mmc_queue_reqs_free_bufs()
>     Added Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
>     Added Reviewed-by: Harjani Ritesh <riteshh@codeaurora.org>
>
>   mmc: queue: Introduce queue depth
>     Drop chunk referring to mmc_packed_init().
>     Combined into new patch "mmc: queue: Introduce queue depth and use it to allocate and free"
>
>   mmc: queue: Use queue depth to allocate and free
>     Combined into new patch "mmc: queue: Introduce queue depth and use it to allocate and free"
>
>   mmc: queue: Allocate queue of size qdepth
>     Combined into new patch "mmc: queue: Introduce queue depth and use it to allocate and free"
>
>   mmc: queue: Introduce queue depth and use it to allocate and free
>     New patch from combining 3 patches above.
>
>   mmc: mmc: Add Command Queue definitions
>     Add comment about excluding qdepths of 1 or 2.
>
>   mmc: mmc: Add functions to enable / disable the Command Queue
>     Change mmc_cmdq_switch() 'enable' parameter from 'int' to 'bool'.
>
>   mmc: mmc_test: Disable Command Queue while mmc_test is used
>     Added Reviewed-by: Harjani Ritesh <riteshh@codeaurora.org>
>
>   mmc: block: Disable Command Queue while RPMB is used
>     As per Ritesh, assign 'ret' to 0 and return 'ret'.
>     Added Reviewed-by: Harjani Ritesh <riteshh@codeaurora.org>
>
>   mmc: core: Do not prepare a new request twice
>     Added Reviewed-by: Harjani Ritesh <riteshh@codeaurora.org>
>
>   mmc: core: Export mmc_retune_hold() and mmc_retune_release()
>     Added Reviewed-by: Harjani Ritesh <riteshh@codeaurora.org>
>
>   mmc: block: Factor out mmc_blk_requeue()
>     Dropped because it only affected "packed commands" code.
>
>   mmc: block: Use local var for mqrq_cur
>     Dropped chucks referring to Packed Commands.
>     Added Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
>
>   mmc: block: Pass mqrq to mmc_blk_prep_packed_list()
>     Dropped because it only affected "packed commands" code.
>
>   mmc: block: Introduce queue semantics
>     Add mmc_blk_requeue() lost from dropped patches.
>
>   mmc: queue: Share mmc request array between partitions
>     Dropped chucks referring to Packed Commands.
>     Change mqrq_ref_cnt from 'int' to 'unsigned int'
>     Add a comment about synchronisation of mqrq_ref_cnt.
>
>   mmc: mmc: Enable Software Command Queuing
>     Get rid of MMC_CAP_SWCMDQ and use MMC_CAP_CMD_DURING_TFR instead
>
>   mmc: sdhci-pci: Enable Software Command Queuing for some Intel controllers
>     Dropped because MMC_CAP_SWCMDQ removed.
>
>   mmc: sdhci-acpi: Enable Software Command Queuing for some Intel controllers
>     Dropped because MMC_CAP_SWCMDQ removed.
>
> Changes in V7:
>
>   Re-based on next.
>
>   mmc: mmc: Add Command Queue definitions
>     Remove cmdq_en flag and add Linus Walleij's Reviewed-by.
>
>   mmc: mmc: Add functions to enable / disable the Command
>     Add cmdq_en flag.
>
> Changes in V6:
>
>   mmc: core: Do not prepare a new request twice
>     Ensure struct mmc_async_req is always initialized to zero
>
> Changes in V5:
>
>   Patches 1-5 dropped because they have been applied.
>
>   Re-based on next.
>
>   Fixed use of blk_end_request_cur() when it should have been
>   blk_end_request_all() to error out requests during error recovery.
>
>   Fixed unpaired retune_hold / retune_release in the error recovery path.
>
> Changes in V4:
>
>   Re-based on next + v4.8-rc2 + "block: Fix secure erase" patch
>
> Changes in V3:
>
>   Patches 1-25 dropped because they have been applied.
>
>   Re-based on next.
>
>   mmc: queue: Allocate queue of size qdepth
>     Free queue during cleanup
>
>   mmc: mmc: Add Command Queue definitions
>     Add cmdq_en to mmc-dev-attrs.txt documentation
>
>   mmc: queue: Share mmc request array between partitions
>     New patch
>
> Changes in V2:
>
>   Added 5 patches already sent here:
>
>     http://marc.info/?l=linux-mmc&m=146712062816835
>
>   Added 3 more new patches:
>
>     mmc: sdhci-pci: Do not runtime suspend at the end of sdhci_pci_probe()
>     mmc: sdhci: Avoid STOP cmd triggering warning in sdhci_send_command()
>     mmc: sdhci: sdhci_execute_tuning() must delete timer
>
>   Carried forward the V2 fix to:
>
>     mmc: mmc_test: Disable Command Queue while mmc_test is used
>
>   Also reset the cmd circuit for data timeout if it is processing the data
>   cmd, in patch:
>
>     mmc: sdhci: Do not reset cmd or data circuits that are in use
>
> There wasn't much comment on the RFC so there have been few changes.
> Venu Byravarasu commented that it may be more efficient to use Software
> Command Queuing only when there is more than 1 request queued - it isn't
> obvious how well that would work in practice, but it could be added later
> if it could be shown to be beneficial.
>
> Original Cover Letter:
>
> Chuanxiao Dong sent some patches last year relating to eMMC 5.1 Software
> Command Queuing.  He did not follow-up but I have contacted him and he says
> it is OK if I take over upstreaming the patches.
>
> eMMC Command Queuing is a feature added in version 5.1.  The card maintains
> a queue of up to 32 data transfers.  Commands CMD45/CMD45 are sent to queue
> up transfers in advance, and then one of the transfers is selected to
> "execute" by CMD46/CMD47 at which point data transfer actually begins.
>
> The advantage of command queuing is that the card can prepare for transfers
> in advance.  That makes a big difference in the case of random reads because
> the card can start reading into its cache in advance.
>
> A v5.1 host controller can manage the command queue itself, but it is also
> possible for software to manage the queue using an non-v5.1 host controller
> - that is what Software Command Queuing is.
>
> Refer to the JEDEC (http://www.jedec.org/) eMMC v5.1 Specification for more
> information about Command Queuing.
>
> While these patches are heavily based on Dong's patches, there are some
> changes:
>
> SDHCI has been amended to support commands during transfer. That is a
> generic change added in patches 1 - 5. [Those patches have now been applied]
> In principle, that would also support SDIO's CMD52 during data transfer.
>
> The original approach added multiple commands into the same request for
> sending CMD44, CMD45 and CMD13. That is not strictly necessary and has
> been omitted for now.
>
> The original approach also called blk_end_request() from the mrq->done()
> function, which means the upper layers learnt of completed requests
> slightly earlier. That is not strictly related to Software Command Queuing
> and is something that could potentially be done for all data requests.
> That has been omitted for now.
>
> The current block driver supports 2 requests on the go at a time. Patches
> 1 - 8 make preparations for an arbitrary sized queue. Patches 9 - 12
> introduce Command Queue definitions and helpers.  Patches 13 - 19
> complete the job of making the block driver use a queue.  Patches 20 - 23
> finally add Software Command Queuing, and 24 - 25 enable it for Intel eMMC
> controllers. Most of the Software Command Queuing functionality is added
> in patch 22.
>
> The patches can also be found here:
>
>         http://git.infradead.org/users/ahunter/linux-sdhci.git/shortlog/refs/heads/swcmdq
>
> The patches have only had basic testing so far. Ad-hoc testing shows a
> degradation in sequential read performance of about 10% but an increase in
> throughput for mixed workload of multiple processes of about 90%. The
> reduction in sequential performance is due to the need to read the Queue
> Status register between each transfer.
>
> These patches should not conflict with Hardware Command Queuing which
> handles the queue in a completely different way and thus does not need
> to share code with Software Command Queuing. The exceptions being the
> Command Queue definitions and queue allocation which should be able to be
> used.
>
>
> Adrian Hunter (20):
>       mmc: block: Restore line inadvertently removed with packed commands
>       mmc: block: Fix 4K native sector check
>       mmc: queue: Fix queue thread wake-up
>       mmc: queue: Factor out mmc_queue_alloc_bounce_bufs()
>       mmc: queue: Factor out mmc_queue_alloc_bounce_sgs()
>       mmc: queue: Factor out mmc_queue_alloc_sgs()
>       mmc: queue: Factor out mmc_queue_reqs_free_bufs()
>       mmc: queue: Introduce queue depth and use it to allocate and free
>       mmc: mmc: Add Command Queue definitions
>       mmc: mmc: Add functions to enable / disable the Command Queue
>       mmc: mmc_test: Disable Command Queue while mmc_test is used
>       mmc: block: Disable Command Queue while RPMB is used
>       mmc: core: Do not prepare a new request twice
>       mmc: core: Export mmc_retune_hold() and mmc_retune_release()
>       mmc: block: Use local var for mqrq_cur
>       mmc: block: Introduce queue semantics
>       mmc: queue: Share mmc request array between partitions
>       mmc: queue: Add a function to control wake-up on new requests
>       mmc: block: Add Software Command Queuing
>       mmc: mmc: Enable Software Command Queuing
>
>  Documentation/mmc/mmc-dev-attrs.txt |   1 +
>  drivers/mmc/card/block.c            | 712 +++++++++++++++++++++++++++++++++---
>  drivers/mmc/card/mmc_test.c         |  21 +-
>  drivers/mmc/card/queue.c            | 328 +++++++++++------
>  drivers/mmc/card/queue.h            |  27 +-
>  drivers/mmc/core/core.c             |  18 +-
>  drivers/mmc/core/host.c             |   2 +
>  drivers/mmc/core/host.h             |   2 -
>  drivers/mmc/core/mmc.c              |  44 ++-
>  drivers/mmc/core/mmc_ops.c          |  28 ++
>  include/linux/mmc/card.h            |   8 +
>  include/linux/mmc/core.h            |   6 +
>  include/linux/mmc/host.h            |   3 +-
>  include/linux/mmc/mmc.h             |  17 +
>  14 files changed, 1035 insertions(+), 182 deletions(-)
>
>
> Regards
> Adrian

Re: [PATCH V8 04/20] mmc: queue: Factor out mmc_queue_alloc_bounce_bufs()

[Ulf Hansson]

On 29 November 2016 at 11:09, Adrian Hunter <adrian.hunter@intel.com> wrote:
> In preparation for supporting a queue of requests, factor out
> mmc_queue_alloc_bounce_bufs().
>
> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> Reviewed-by: Harjani Ritesh <riteshh@codeaurora.org>
> ---
>  drivers/mmc/card/queue.c | 45 +++++++++++++++++++++++++++------------------
>  1 file changed, 27 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c
> index 010888d8d97c..4497a218c245 100644
> --- a/drivers/mmc/card/queue.c
> +++ b/drivers/mmc/card/queue.c
> @@ -186,6 +186,31 @@ static void mmc_queue_setup_discard(struct request_queue *q,
>                 queue_flag_set_unlocked(QUEUE_FLAG_SECERASE, q);
>  }
>
> +static bool mmc_queue_alloc_bounce_bufs(struct mmc_queue *mq,
> +                                       unsigned int bouncesz)

This causes a compiler warning about unused function, in case when
CONFIG_MMC_BLOCK_BOUNCE is unset.
No worries, I fixed it and amended the patch.

[...]

Kind regards
Uffe

Re: [PATCH V8 05/20] mmc: queue: Factor out mmc_queue_alloc_bounce_sgs()

[Ulf Hansson]

On 29 November 2016 at 11:09, Adrian Hunter <adrian.hunter@intel.com> wrote:
> In preparation for supporting a queue of requests, factor out
> mmc_queue_alloc_bounce_sgs().
>
> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> Reviewed-by: Harjani Ritesh <riteshh@codeaurora.org>
> ---
>  drivers/mmc/card/queue.c | 44 ++++++++++++++++++++++++++++----------------
>  1 file changed, 28 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c
> index 4497a218c245..3fd27c684292 100644
> --- a/drivers/mmc/card/queue.c
> +++ b/drivers/mmc/card/queue.c
> @@ -211,6 +211,30 @@ static bool mmc_queue_alloc_bounce_bufs(struct mmc_queue *mq,
>         return true;
>  }
>
> +static int mmc_queue_alloc_bounce_sgs(struct mmc_queue *mq,
> +                                     unsigned int bouncesz)

This causes a compiler warning about unused function, in case when
CONFIG_MMC_BLOCK_BOUNCE is unset.
No worries, I fixed it and amended the patch.

[...]

Kind regards
Uffe

Re: [PATCH V8 05/20] mmc: queue: Factor out mmc_queue_alloc_bounce_sgs()

[Adrian Hunter]

On 30/11/16 10:17, Ulf Hansson wrote:
> On 29 November 2016 at 11:09, Adrian Hunter <adrian.hunter@intel.com> wrote:
>> In preparation for supporting a queue of requests, factor out
>> mmc_queue_alloc_bounce_sgs().
>>
>> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
>> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
>> Reviewed-by: Harjani Ritesh <riteshh@codeaurora.org>
>> ---
>>  drivers/mmc/card/queue.c | 44 ++++++++++++++++++++++++++++----------------
>>  1 file changed, 28 insertions(+), 16 deletions(-)
>>
>> diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c
>> index 4497a218c245..3fd27c684292 100644
>> --- a/drivers/mmc/card/queue.c
>> +++ b/drivers/mmc/card/queue.c
>> @@ -211,6 +211,30 @@ static bool mmc_queue_alloc_bounce_bufs(struct mmc_queue *mq,
>>         return true;
>>  }
>>
>> +static int mmc_queue_alloc_bounce_sgs(struct mmc_queue *mq,
>> +                                     unsigned int bouncesz)
> 
> This causes a compiler warning about unused function, in case when
> CONFIG_MMC_BLOCK_BOUNCE is unset.
> No worries, I fixed it and amended the patch.

Thank you!

Re: [PATCH V8 01/20] mmc: block: Restore line inadvertently removed with packed commands

[Linus Walleij]

On Tue, Nov 29, 2016 at 11:09 AM, Adrian Hunter <adrian.hunter@intel.com> wrote:

> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>

Ooops my mistake, thanks.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij