From: Piotr Sroka <piotrs@cadence.com>
To: linux-mmc@vger.kernel.org
Cc: Adrian Hunter <adrian.hunter@intel.com>,
Ulf Hansson <ulf.hansson@linaro.org>,
linux-kernel@vger.kernel.org,
Masahiro Yamada <yamada.masahiro@socionext.com>,
Piotr Sroka <piotrs@cadence.com>
Subject: [v5 3/4] mmc: sdhci-cadence: Update PHY delay configuration
Date: Tue, 21 Mar 2017 14:33:11 +0000 [thread overview]
Message-ID: <1490106791-3553-1-git-send-email-piotrs@cadence.com> (raw)
In-Reply-To: <1490106736-2242-1-git-send-email-piotrs@cadence.com>
DTS properties are used instead of fixed data
because PHY settings can be different for different chips/boards.
Signed-off-by: Piotr Sroka <piotrs@cadence.com>
---
Changes for v2:
- dts part was removed from this patch
- most delays were moved from dts file
to data associated with an SoC specific compatible
- remove unrelated changes
---
Changes for v3:
- move all delays back to dts because they are also boards dependent
- prefix all of the Cadence-specific properties with cdns prefix
- put checking delay properties inside the for loop
instead of using a lot of single if expressions
---
Changes for v4:
- remove unecessary declaration of sdhci_cdns_match
- format fix (blank line removed)
---
Changes for v5:
- use driver version from next branch, with applied enhanced strobe feature support.
- change name of property to be consistent with timing modes
available in Linux
---
drivers/mmc/host/sdhci-cadence.c | 53 ++++++++++++++++++++++++++++++++++------
1 file changed, 46 insertions(+), 7 deletions(-)
diff --git a/drivers/mmc/host/sdhci-cadence.c b/drivers/mmc/host/sdhci-cadence.c
index 83c3b55..c3c7090 100644
--- a/drivers/mmc/host/sdhci-cadence.c
+++ b/drivers/mmc/host/sdhci-cadence.c
@@ -18,6 +18,7 @@
#include <linux/module.h>
#include <linux/mmc/host.h>
#include <linux/mmc/mmc.h>
+#include <linux/of.h>
#include "sdhci-pltfm.h"
@@ -55,6 +56,9 @@
#define SDHCI_CDNS_PHY_DLY_EMMC_LEGACY 0x06
#define SDHCI_CDNS_PHY_DLY_EMMC_SDR 0x07
#define SDHCI_CDNS_PHY_DLY_EMMC_DDR 0x08
+#define SDHCI_CDNS_PHY_DLY_SDCLK 0x0b
+#define SDHCI_CDNS_PHY_DLY_HSMMC 0x0c
+#define SDHCI_CDNS_PHY_DLY_STROBE 0x0d
/*
* The tuned val register is 6 bit-wide, but not the whole of the range is
@@ -68,6 +72,25 @@ struct sdhci_cdns_priv {
bool enhanced_strobe;
};
+struct sdhci_cdns_phy_cfg {
+ const char *property;
+ u8 addr;
+};
+
+static const struct sdhci_cdns_phy_cfg sdhci_cdns_phy_cfgs[] = {
+ { "cdns,phy-input-delay-sd-highspeed", SDHCI_CDNS_PHY_DLY_SD_HS, },
+ { "cdns,phy-input-delay-legacy", SDHCI_CDNS_PHY_DLY_SD_DEFAULT, },
+ { "cdns,phy-input-delay-sd-uhs-sdr12", SDHCI_CDNS_PHY_DLY_UHS_SDR12, },
+ { "cdns,phy-input-delay-sd-uhs-sdr25", SDHCI_CDNS_PHY_DLY_UHS_SDR25, },
+ { "cdns,phy-input-delay-sd-uhs-sdr50", SDHCI_CDNS_PHY_DLY_UHS_SDR50, },
+ { "cdns,phy-input-delay-sd-uhs-ddr50", SDHCI_CDNS_PHY_DLY_UHS_DDR50, },
+ { "cdns,phy-input-delay-mmc-highspeed", SDHCI_CDNS_PHY_DLY_EMMC_SDR, },
+ { "cdns,phy-input-delay-mmc-ddr", SDHCI_CDNS_PHY_DLY_EMMC_DDR, },
+ { "cdns,phy-dll-delay-sdclk", SDHCI_CDNS_PHY_DLY_SDCLK, },
+ { "cdns,phy-dll-delay-sdclk-hsmmc", SDHCI_CDNS_PHY_DLY_HSMMC, },
+ { "cdns,phy-dll-delay-strobe", SDHCI_CDNS_PHY_DLY_STROBE, },
+};
+
static int sdhci_cdns_write_phy_reg(struct sdhci_cdns_priv *priv,
u8 addr, u8 data)
{
@@ -92,13 +115,26 @@ static int sdhci_cdns_write_phy_reg(struct sdhci_cdns_priv *priv,
return 0;
}
-static void sdhci_cdns_phy_init(struct sdhci_cdns_priv *priv)
+static int sdhci_cdns_phy_init(struct device_node *np,
+ struct sdhci_cdns_priv *priv)
{
- sdhci_cdns_write_phy_reg(priv, SDHCI_CDNS_PHY_DLY_SD_HS, 4);
- sdhci_cdns_write_phy_reg(priv, SDHCI_CDNS_PHY_DLY_SD_DEFAULT, 4);
- sdhci_cdns_write_phy_reg(priv, SDHCI_CDNS_PHY_DLY_EMMC_LEGACY, 9);
- sdhci_cdns_write_phy_reg(priv, SDHCI_CDNS_PHY_DLY_EMMC_SDR, 2);
- sdhci_cdns_write_phy_reg(priv, SDHCI_CDNS_PHY_DLY_EMMC_DDR, 3);
+ u32 val;
+ int ret, i;
+
+ for (i = 0; i < ARRAY_SIZE(sdhci_cdns_phy_cfgs); i++) {
+ ret = of_property_read_u32(np, sdhci_cdns_phy_cfgs[i].property,
+ &val);
+ if (ret)
+ continue;
+
+ ret = sdhci_cdns_write_phy_reg(priv,
+ sdhci_cdns_phy_cfgs[i].addr,
+ val);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
}
static inline void *sdhci_cdns_priv(struct sdhci_host *host)
@@ -267,6 +303,7 @@ static int sdhci_cdns_probe(struct platform_device *pdev)
struct sdhci_cdns_priv *priv;
struct clk *clk;
int ret;
+ struct device *dev = &pdev->dev;
clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(clk))
@@ -297,7 +334,9 @@ static int sdhci_cdns_probe(struct platform_device *pdev)
if (ret)
goto free;
- sdhci_cdns_phy_init(priv);
+ ret = sdhci_cdns_phy_init(dev->of_node, priv);
+ if (ret)
+ goto free;
ret = sdhci_add_host(host);
if (ret)
--
2.2.2
next prev parent reply other threads:[~2017-03-21 14:33 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-21 14:32 [v5 1/4] mmc: sdhci-cadence: Fix writing PHY delay Piotr Sroka
[not found] ` <1490106736-2242-1-git-send-email-piotrs-vna1KIf7WgpBDgjK7y7TUQ@public.gmane.org>
2017-03-21 14:33 ` [v5 2/4] dt-bindings: mmc: add description of PHY delays for sdhci-cadence Piotr Sroka
2017-03-22 7:30 ` Masahiro Yamada
2017-03-30 11:06 ` Piotr Sroka
2017-03-24 16:26 ` Rob Herring
2017-03-30 19:31 ` Ulf Hansson
2017-03-21 14:33 ` Piotr Sroka [this message]
2017-03-22 7:31 ` [v5 3/4] mmc: sdhci-cadence: Update PHY delay configuration Masahiro Yamada
2017-03-29 13:03 ` Adrian Hunter
2017-03-30 19:30 ` Ulf Hansson
2017-03-21 14:33 ` [v5 4/4] mmc: sdhci-cadence: refactor probe function Piotr Sroka
2017-03-22 7:31 ` Masahiro Yamada
2017-03-29 13:03 ` Adrian Hunter
2017-03-30 19:30 ` Ulf Hansson
2017-03-22 7:24 ` [v5 1/4] mmc: sdhci-cadence: Fix writing PHY delay Masahiro Yamada
2017-03-29 13:03 ` Adrian Hunter
2017-03-30 19:30 ` Ulf Hansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1490106791-3553-1-git-send-email-piotrs@cadence.com \
--to=piotrs@cadence.com \
--cc=adrian.hunter@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=ulf.hansson@linaro.org \
--cc=yamada.masahiro@socionext.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox