public inbox for linux-mmc@vger.kernel.org
 help / color / mirror / Atom feed
From: Fabio Estevam <festevam@gmail.com>
To: ulf.hansson@linaro.org
Cc: adrian.hunter@intel.com, dongas86@gmail.com,
	linux-mmc@vger.kernel.org, Fabio Estevam <fabio.estevam@nxp.com>
Subject: [PATCH] mmc: sdhci-esdhc-imx: Check the return value from clk_prepare_enable()
Date: Fri, 28 Apr 2017 17:00:04 -0300	[thread overview]
Message-ID: <1493409604-24716-1-git-send-email-festevam@gmail.com> (raw)

From: Fabio Estevam <fabio.estevam@nxp.com>

clk_prepare_enable() may fail, so we should better check its return value
and propagate it in the case of error.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
---
 drivers/mmc/host/sdhci-esdhc-imx.c | 54 +++++++++++++++++++++++++++++---------
 1 file changed, 41 insertions(+), 13 deletions(-)

diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 23d8b8a..b5c7241 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -1250,14 +1250,20 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
 
 	pltfm_host->clk = imx_data->clk_per;
 	pltfm_host->clock = clk_get_rate(pltfm_host->clk);
-	clk_prepare_enable(imx_data->clk_per);
-	clk_prepare_enable(imx_data->clk_ipg);
-	clk_prepare_enable(imx_data->clk_ahb);
+	err = clk_prepare_enable(imx_data->clk_per);
+	if (err)
+		goto free_sdhci;
+	err = clk_prepare_enable(imx_data->clk_ipg);
+	if (err)
+		goto disable_per_clk;
+	err = clk_prepare_enable(imx_data->clk_ahb);
+	if (err)
+		goto disable_ipg_clk;
 
 	imx_data->pinctrl = devm_pinctrl_get(&pdev->dev);
 	if (IS_ERR(imx_data->pinctrl)) {
 		err = PTR_ERR(imx_data->pinctrl);
-		goto disable_clk;
+		goto disable_ahb_clk;
 	}
 
 	imx_data->pins_default = pinctrl_lookup_state(imx_data->pinctrl,
@@ -1297,13 +1303,13 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
 	else
 		err = sdhci_esdhc_imx_probe_nondt(pdev, host, imx_data);
 	if (err)
-		goto disable_clk;
+		goto disable_ahb_clk;
 
 	sdhci_esdhc_imx_hwinit(host);
 
 	err = sdhci_add_host(host);
 	if (err)
-		goto disable_clk;
+		goto disable_ahb_clk;
 
 	pm_runtime_set_active(&pdev->dev);
 	pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
@@ -1313,10 +1319,12 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
 
 	return 0;
 
-disable_clk:
-	clk_disable_unprepare(imx_data->clk_per);
-	clk_disable_unprepare(imx_data->clk_ipg);
+disable_ahb_clk:
 	clk_disable_unprepare(imx_data->clk_ahb);
+disable_ipg_clk:
+	clk_disable_unprepare(imx_data->clk_ipg);
+disable_per_clk:
+	clk_disable_unprepare(imx_data->clk_per);
 free_sdhci:
 	sdhci_pltfm_free(pdev);
 	return err;
@@ -1393,14 +1401,34 @@ static int sdhci_esdhc_runtime_resume(struct device *dev)
 	struct sdhci_host *host = dev_get_drvdata(dev);
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host);
+	int err;
 
 	if (!sdhci_sdio_irq_enabled(host)) {
-		clk_prepare_enable(imx_data->clk_per);
-		clk_prepare_enable(imx_data->clk_ipg);
+		err = clk_prepare_enable(imx_data->clk_per);
+		if (err)
+			return err;
+		err = clk_prepare_enable(imx_data->clk_ipg);
+		if (err)
+			goto disable_per_clk;
 	}
-	clk_prepare_enable(imx_data->clk_ahb);
+	err = clk_prepare_enable(imx_data->clk_ahb);
+	if (err)
+		goto disable_ipg_clk;
+	err = sdhci_runtime_resume_host(host);
+	if (err)
+		goto disable_ahb_clk;
+
+	return 0;
 
-	return sdhci_runtime_resume_host(host);
+disable_ahb_clk:
+	clk_disable_unprepare(imx_data->clk_ahb);
+disable_ipg_clk:
+	if (!sdhci_sdio_irq_enabled(host))
+		clk_disable_unprepare(imx_data->clk_ipg);
+disable_per_clk:
+	if (!sdhci_sdio_irq_enabled(host))
+		clk_disable_unprepare(imx_data->clk_per);
+	return err;
 }
 #endif
 
-- 
2.7.4


             reply	other threads:[~2017-04-28 20:00 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-04-28 20:00 Fabio Estevam [this message]
2017-05-22 13:21 ` [PATCH] mmc: sdhci-esdhc-imx: Check the return value from clk_prepare_enable() Fabio Estevam
  -- strict thread matches above, loose matches on Subject: below --
2013-10-08 13:47 Fabio Estevam
2013-10-09  1:42 ` Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1493409604-24716-1-git-send-email-festevam@gmail.com \
    --to=festevam@gmail.com \
    --cc=adrian.hunter@intel.com \
    --cc=dongas86@gmail.com \
    --cc=fabio.estevam@nxp.com \
    --cc=linux-mmc@vger.kernel.org \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox