[PATCH V4 08/11] mmc: block: Prepare CQE data

[Adrian Hunter <adrian.hunter@intel.com>]

Enhance mmc_blk_data_prep() to support CQE requests.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
---
 drivers/mmc/core/block.c | 45 ++++++++++++++++++++++++++++++++++-----------
 1 file changed, 34 insertions(+), 11 deletions(-)

diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
index 40f0d596ed54..915290c74363 100644
--- a/drivers/mmc/core/block.c
+++ b/drivers/mmc/core/block.c
@@ -36,6 +36,7 @@
 #include <linux/compat.h>
 #include <linux/pm_runtime.h>
 #include <linux/idr.h>
+#include <linux/ioprio.h>
 
 #include <linux/mmc/ioctl.h>
 #include <linux/mmc/card.h>
@@ -1485,25 +1486,27 @@ static enum mmc_blk_status mmc_blk_err_check(struct mmc_card *card,
 }
 
 static void mmc_blk_data_prep(struct mmc_queue *mq, struct mmc_queue_req *mqrq,
-			      int disable_multi, bool *do_rel_wr,
-			      bool *do_data_tag)
+			      int disable_multi, bool *do_rel_wr_p,
+			      bool *do_data_tag_p)
 {
 	struct mmc_blk_data *md = mq->blkdata;
 	struct mmc_card *card = md->queue.card;
 	struct mmc_blk_request *brq = &mqrq->brq;
 	struct request *req = mmc_queue_req_to_req(mqrq);
+	bool do_rel_wr, do_data_tag;
 
 	/*
 	 * Reliable writes are used to implement Forced Unit Access and
 	 * are supported only on MMCs.
 	 */
-	*do_rel_wr = (req->cmd_flags & REQ_FUA) &&
-		     rq_data_dir(req) == WRITE &&
-		     (md->flags & MMC_BLK_REL_WR);
+	do_rel_wr = (req->cmd_flags & REQ_FUA) &&
+		    rq_data_dir(req) == WRITE &&
+		    (md->flags & MMC_BLK_REL_WR);
 
 	memset(brq, 0, sizeof(struct mmc_blk_request));
 
 	brq->mrq.data = &brq->data;
+	brq->mrq.tag = req->tag;
 
 	brq->stop.opcode = MMC_STOP_TRANSMISSION;
 	brq->stop.arg = 0;
@@ -1518,6 +1521,15 @@ static void mmc_blk_data_prep(struct mmc_queue *mq, struct mmc_queue_req *mqrq,
 
 	brq->data.blksz = 512;
 	brq->data.blocks = blk_rq_sectors(req);
+	brq->data.blk_addr = blk_rq_pos(req);
+
+	/*
+	 * The command queue supports 2 priorities: "high" (1) and "simple" (0).
+	 * The eMMC will give "high" priority tasks priority over "simple"
+	 * priority tasks. Here we give priority to IOPRIO_CLASS_RT.
+	 */
+	if (IOPRIO_PRIO_CLASS(req_get_ioprio(req)) == IOPRIO_CLASS_RT)
+		brq->data.flags |= MMC_DATA_PRIO;
 
 	/*
 	 * The block layer doesn't support all sector count
@@ -1547,18 +1559,23 @@ static void mmc_blk_data_prep(struct mmc_queue *mq, struct mmc_queue_req *mqrq,
 						brq->data.blocks);
 	}
 
-	if (*do_rel_wr)
+	if (do_rel_wr) {
 		mmc_apply_rel_rw(brq, card, req);
+		brq->data.flags |= MMC_DATA_REL_WR;
+	}
 
 	/*
 	 * Data tag is used only during writing meta data to speed
 	 * up write and any subsequent read of this meta data
 	 */
-	*do_data_tag = card->ext_csd.data_tag_unit_size &&
-		       (req->cmd_flags & REQ_META) &&
-		       (rq_data_dir(req) == WRITE) &&
-		       ((brq->data.blocks * brq->data.blksz) >=
-			card->ext_csd.data_tag_unit_size);
+	do_data_tag = card->ext_csd.data_tag_unit_size &&
+		      (req->cmd_flags & REQ_META) &&
+		      (rq_data_dir(req) == WRITE) &&
+		      ((brq->data.blocks * brq->data.blksz) >=
+		       card->ext_csd.data_tag_unit_size);
+
+	if (do_data_tag)
+		brq->data.flags |= MMC_DATA_DAT_TAG;
 
 	mmc_set_data_timeout(&brq->data, card);
 
@@ -1587,6 +1604,12 @@ static void mmc_blk_data_prep(struct mmc_queue *mq, struct mmc_queue_req *mqrq,
 	mqrq->areq.mrq = &brq->mrq;
 
 	mmc_queue_bounce_pre(mqrq);
+
+	if (do_rel_wr_p)
+		*do_rel_wr_p = do_rel_wr;
+
+	if (do_data_tag_p)
+		*do_data_tag_p = do_data_tag;
 }
 
 static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
-- 
1.9.1