[PATCH V5 01/13] mmc: core: Add mmc_retune_hold_now()

[Adrian Hunter <adrian.hunter@intel.com>]

mmc_return_hold() / mmc_retune_release() are used around a group of
commands to prevent re-tuning between the commands. Re-tuning can still
happen before the first command. In some cases, re-tuning must be
prevented entirely. Add mmc_retune_hold_now() for that purpose. It is
added in preparation for CQE support where it will be used by CQE recovery.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
---
 drivers/mmc/core/host.c | 6 ++++++
 drivers/mmc/core/host.h | 1 +
 2 files changed, 7 insertions(+)

diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index 1503412f826c..ad88deb2e8f3 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -111,6 +111,12 @@ void mmc_retune_hold(struct mmc_host *host)
 	host->hold_retune += 1;
 }
 
+void mmc_retune_hold_now(struct mmc_host *host)
+{
+	host->retune_now = 0;
+	host->hold_retune += 1;
+}
+
 void mmc_retune_release(struct mmc_host *host)
 {
 	if (host->hold_retune)
diff --git a/drivers/mmc/core/host.h b/drivers/mmc/core/host.h
index fb6a76a03833..77d6f60d1bf9 100644
--- a/drivers/mmc/core/host.h
+++ b/drivers/mmc/core/host.h
@@ -19,6 +19,7 @@
 void mmc_retune_enable(struct mmc_host *host);
 void mmc_retune_disable(struct mmc_host *host);
 void mmc_retune_hold(struct mmc_host *host);
+void mmc_retune_hold_now(struct mmc_host *host);
 void mmc_retune_release(struct mmc_host *host);
 int mmc_retune(struct mmc_host *host);
 void mmc_retune_pause(struct mmc_host *host);
-- 
1.9.1